Jump to content

Lightning

Members
  • Posts

    14
  • Joined

  • Last visited

Everything posted by Lightning

  1. No prob. Glad to hear it goes amazing now Doubt APR would want to let us know what boost pressure they're running at, only way to find out is to get a meter in I guess. How's the torque curve? Linear/Peaky?
  2. Would like to ask: What boost pressure (peak) as well as stable boost pressure is APR stage 1 running on? Thanks.
  3. Hi all, Am also wondering now- Could it be because of the boost controller that might be conflicting with ECU boost figures per rpm set that might have caused the cut? Aka controller reacting faster and boosting from lower RPMs, hence higher boost pressures than the preset value on ECU leading to the ECU cutting the boost?
  4. Hmm, good point. My tuner has increased fuelling for only higher revs but has kept the lower revs at almost the same fuel input, which might lead to cuts at lower revs and still possibly not enough fuel at higher revs. I would say that's a good hit at the problem because I always thought that insufficient fuel will just blow the engine :-\ Will look into the fuelling again, thanks for you input! Still open to any more possible solution guys! Thanks for feedback so far, looking forward to more troubleshooting help!Â
  5. But this happens even at 10% throttle input, could it be a spoilt sensor then? Had a error code reader plugged into the OBD but that was after the restart and boost was back online when I went back to the workshop: No error codes recorded. Boost was holding stable, issue was the spiking which was way way way above before dropping back down, hence my decision to install a BC to hold the boost from spiking. Could it be any other issues or procedures to troubleshoot this? It is possible for me to have a remap done (by someone else) but if it's a hardware issue then this problem will still arise, right? Am trying to exhaust all possibilities first. Thanks for the help guys, would appreciate any more suggestions/inputs!
  6. Not too sure if I can ask for a payback, since there was no such scheme/guarantee for custom maps. No troubleshooting as to why your boost got cut?
  7. Hi all, Firstly, greetings, am new to this forum and this is my first post. Having some slight issues with my Golf R, I hope that the kind folks and fellow 'R' members around here would be able to help me. Recently I've gone for a custom tune using a hubdyno (instead of a rolling dyno). Firstly, during the first few runs everything was pretty much smooth. However, on the last run on the dyno, there seemed to be a haldex issue, with the rear wheels completely stopping their revolutions while the power was only on the 2 front wheels fully for the dyno pull. After a few attempts, a pull was recorded with all 4 wheels transmitting power to the hub dyno. However, after the tune I've noticed some spiking of the turbo in accordance to my driving style which was way over my comfort zone, hence installed a boost controller. (Almost the next day after the tune) Now here comes the problem - Boost cut. My boost gets cut TOTALLY and unlike another of the thread that I've read which might be a dsg issue (and the boost comes back after a few seconds), my boost does NOT return at all, even after minutes. However, after completely shutting down the engine and restarting the car, the boost seems to be back online. (While it was not boosting, engine had almost no power and keeping to my speed on the road was near impossible as a slight uphill would see me losing speed even with full throttle on- at zero boost). The thing is- I was not boosting at full boost, but instead, the most recent cut happened when I shifted into gear 4 (DSG) at about 4000rpm, gave it 10%-20% throttle imput, boost went up slightly above 0bar (0.2,0.3?) and I got the boost cut. Was initially thinking that it could be the ECU that is cutting the boost entirely- but I do not know why (hence asking for opinions and possibilities as to why there's a boost cut), but am also opening up the option that there is a possibility of the DSG cutting the boost (and never letting it come back until I restart the car) or could it even be the haldex not keeping up?? (Confused) This happens when I'm on different gears at different RPMs and boost levels, with the air-con turned on or off. (I would say almost entirely RANDOM). Am open to suggestions/possibilities and also solutions/troubleshooting advice so please help if you can. In case I've missed out important info, please feel free to ask and I'll provide the info as much as possible to my knowledge. [Currently boosting at 1.1-1.3 bar boost depending on boost controller settings] Appreciate very much and thank you in advance, have a great day ahead!
×
×
  • Create New...