Jump to content

Martingolfr

New Members
  • Posts

    11
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Martingolfr's Achievements

Member

Member (2/9)

0

Reputation

  1. Strange. We used the face-lift transfer case and propshaft bolted up OK. Surely its OK if it bolted together 🤔
  2. Martingolfr

    Cumbria vcds

    Anyone in carlisle area got vcds that can do haldex pump learn a few times to see if we can fix my traction issues
  3. No error codes and Goodyear Eagle f1 supersports with around 6mm on all 4
  4. Not been back to awesome mate. 5 hour round trip and never had chance. Tyres are Goodyear Eagle f1 supersports with all around 6mm
  5. Please help lads before I burn this car 😂 So since bought the car 2015 golf r running stage 2 with meth all was well. That was until wet damp winter approached. Started to notice lots of tc light flashing and loss of traction. Had it at awesome gti and they done haldex service and reset. Shak test drove and said about the loss of traction and get new pump on it. So I done this myself and reset with obd. No better. Tried this multiple times. Tried another haldex ecu. No better. Tested propshaft and it pointed to haldex so bit the bullet and bought a newer diff from a 2018 golf r that had done 6k miles. No better. Only thing left was transfer box so done that today and again went newer from a 2018 audi s3 and still the bloody same. So it's had 3 different ecus. 7082, 7083, 7084 software. 2 diffs. 2 transfer boxes and 3 different haldex pumps. What on earth can it be?????
  6. And can you here clutch engage? And will green tick come on once complete as mine does neither no noises and left 5 minutes and still nothing. Pump primes when on that stage but again never get a green tick to say completed
  7. Step 1 does obd perform this or do you need to move dsg selector to say d for 30 seconds then n for 30 seconds?
  8. Please please help. Getting lots of slip and tc light coming on. No fault codes. Was advised to change the pump so I did. Reset with obdeleven and can hear pump purge but no better. Looked several forums and tried the procedure I seen but how do you do the step were it says engage/disengage clutch for 30 seconds? Does it do that itself upon starting that step? Propshaft moves so transfer box must be ok. Was at Glasgow today and was snowing so tried in a car park and all 4 wheels were spinning which was strange. Tried once home on tarmac and 2wd again 🤔
×
×
  • Create New...