Jump to content

jcull09

New Members
  • Posts

    3
  • Joined

  • Last visited

Everything posted by jcull09

  1. Hi Don, Thank you for your helpful response! I am not a Canadian citizen, I am Irish and permanently residing in Canada, however, the God King continues to irritate me regardless of my nationality 🙃 Regarding the tail lights, the installed items are OEM North American parts. The previous owner had replaced them with OEM European parts but he reverted back to stock prior to selling the car. I finally got back to this and performed some further research last night and found Leuchte sets 20BR and 21BR (left and right outer tails) were the areas I needed to be focusing on. My reviews of each set quickly unearthed the problem: 20BR LA71 was good, 21BR RC8 was not good. As you rightly said, Don, the previous owner got his links and rechts confused. The devil was in the detail, Lichtfunction C21 was coded as follows: “Blinken links Dunkelphase” A simplie change to: ”Blinken rechts Dunkelphase” returned the God Kings DOT rear tail lights to full compliance / functionality. Thanks again, Don! Onwards and upwards. Jamie
  2. Thank you for the response, AHG. I would agree, but in this case the previous owner returned everything back to stock because he was selling the euro tails as a package (tail lights, harness etc) separately. I will take a look at the harness for damage but I definitely want to compare coding between mine and a similar stock car (MK7.5 North American spec). Thanks again!
  3. Hi VW R owners, I’m writing from Canada. I was notified by another driver that my rear blinkers (hazard warning lights) were flashing while I was stopped in traffic, waiting to turn left. I pulled over and found the following: Brakes applied + left turn signal = both rear turn signals flashing Brakes applied + right turn signal = no rear turn signal flashing No brakes applied + left turn signal = left rear turn signal flashing No brakes applied + right turn signal = right rear turn signal flashing The results are the same if the tail lights are illuminated or not. The issue has no impact on the front turn signals or the mirror turn signals, it only affects the tail light signals. This leads me to believe that there is an error in the coding and the application of the brakes is messing up the turn signals. Right now it’s a safety issue for me as I have had a few cars nearly run into my rear end not knowing that I’m attempting to turn (right), or they wait behind me confused as to why I’m in the middle of the road with my blinkers on / assuming I’m broke down. I have used an OBD code reader to see if there are any codes but nothing is showing. Therefore, I have ordered OBDeleven Pro and it will arrive in a couple of days. While I’m waiting, I would appreciate it if another North American Mk7.5 R owner could share their coding for their stock tail lights so I can compare and hopefully repair mine. You may be wondering how is this possible - the previous owner installed OEM European dynamic turn signals but he removed them / reverted back to stock prior to selling the car to me one year ago. He performed the coding updates himself but I’m guessing he messed something minor up. I’m also guessing the tail lights have malfunctioned for a whole year when the brakes are applied. I have searched various forums including this one for the past 48 hours and these are the conclusions I have come to. Thank you in advance for your help! Jamie
×
×
  • Create New...