Jump to content

EvilJokeruk

New Members
  • Posts

    4
  • Joined

  • Last visited

Profile Information

  • Location
    United Kingdom

Personal Information

  • Name
    John

EvilJokeruk's Achievements

R Learner

R Learner (1/9)

0

Reputation

  1. Lovely stuff mate Once I have run all the wiring and got them working and that I'll have to send you a pic and see what you think John
  2. Hi Don, glad you like the avatar. yes option 2 was exactly what I was planning on doing, I just wanted to be sure it was possible before I started pulling all the panels and that out to run the wires through to the front. My OCD won't let me do it messy so has to look as factory as possible lol. Also I'm assuming the Lasttyp would be set to LED Low Load, I've forgotten the German equivalent on VCDS. I'm hoping this way will work as I'm putting four extra LED lights in.
  3. Firstly: tis a UK car, and yes I will update my location on my profile. Secondly: Could I not run a wire from one of the BCM unused leuchte-set pins to control the additional lights? And code them to work the same as the original boot light, as in turns on when tailgate is open, turns off when tailgate is shut. Thirdly: I had a plug and play loom made up so I didn't have to splice into any original wiring. Plugged them all in together, they worked but I'm guessing the bcm picking up on the extra load on the circuit. Because it started messing with my central locking and boot latch. Which way would you suggest to wiring additional boot lights?
  4. Hi All, New to the Forums. Just wondering if anyone could help with potentially knowing if I could fit extra boot lights in the estate and coding them to work as the stock boot light does? i.e. turn on when the tailgate is open, turn off when the tailgate is closed. I am planning on running a wire to an unused pin in the BCM and as I say coding them to work like a stock boot light does. I have already attempted tapping onto the original boot wiring harness but it end up messing about with the central locking, very weird but assuming the BCM is picking up to much load on the circuit. I have seen a guy Mr-Fix i think on YT do it but he tapped into the original harness, but the reason for wanting to do it is I personally do not think the 1 light above is sufficient enough to be able to see properly at night without messing about with the parcel shelf. So if anyone is well versed in know what coding parameters are needed to make this work if its even possible, your help will be much appreciated.
×
×
  • Create New...