Jump to content

Booysenc

New Members
  • Posts

    6
  • Joined

  • Last visited

Everything posted by Booysenc

  1. Quick update, couldn't find any settings to enable or disable the J367 module, due to the error change to disconnected when unplugged I knew the wiring was OK, power was confirmed and I knew it was either a user problem not getting the setting or the module itself. Picked a brand new second hand part for 6euro (and some more for shipping) which was cheap enough for the risk. Quick install and everything works. Appreciate the assistance @dv52
  2. @dv52, appreciate the input, I'll have a look and revert. I'm conflicted with some information but worth double checking anyway, I believe the LIN wiring should be fine because once I disconnected the module it changed the error from Fault to communication error, if the LIN line was broken it wouldn't know about the disconnection. Had a quick look offline about the possibility of coding J367, couldnt see anything but will explore further, I can recall when I played around in the gateway menu one of the menu's brought up J367 so I somewhat believe that this might not have been disabled. History of the car... life lesson for me and anyone interested... don't buy a car when you just immigrated, looking for something and the kids in the back seat shouting and screaming because they are excited to get out of the house. I have no history of the car, even the identification sticker in the trunk where the spare wheel is has been removed, I have no service history (good excuse to change the timing belt and do a full service - at least I now know it's good) but have no idea if things have been changed or settings modified. Again, fortunately there's a limit to the price of this life lesson and I'm gaining some exposure in fault finding. Anyways, back to the problem, I'm comfortable to scratch around wherever, if you have any pointers please point out, I'm grateful of any guidance. Cheers!
  3. @dv52, appreciate the help (both with the car and on the forum) Here's the picture of the fault https://imgur.com/a/Hjas7JO Also the wiring diagrams : https://imgur.com/xATsCtw Start Stop does not work correctly, gives an error on the dashboard when I start the car. Steps I've taken so far : Cleared the fault a few times - returns immediately. Disconnect cable from J367, this then changes the error to communication fault and not Faulty under the fault description Disconnect cable from the alternator, still remains faulty. using OBDeleven I changed the serial number of the battery, believe this is how the new battery is registered. I don't yet have an oscilliscope, been wanting to buy one so might be a good idea, havent yet tested the communication with the multimeter - assuming the alternator needs to be unplugged to make sure comms is from J367 and not elsewhere. I somewhat believe the connection to J367 is there since the error changed once it was no longer connected, just have no idea what to even test next. Appreciate the help!
  4. Hi, Apologies, profile updated, I'm in the Netherlands. Yes the connector is plugged in properly, one of the pins is connected to power as you stated, not sure where the gateway module J533 is located. Is there a way to test the battery monitor module? Like if I read temps or current then I know that module is good? I'll have a look if I can find wiring diagrams but agree, shouldnt be too different
  5. Also want to join the conversation, and appreciate even the existence of this forum We bought a Polo 6R and after taking delivery the battery was dead, "dealer" gave a new battery and I used my obd eleven to adapt it, think it was done right but might be worth reverting back to this point. Ever since I can remember the car has stated stop start error, if this is before or after the battery swop I don't know... I also have a standing P1B0200 Battery Monitoring Control module fault, checked the fuses and verified continuity between positive and one of the pins of the connector. Also when going into the settings of obd eleven, under gateway I cannot set the min/max temperatures of the stop start because it says module doesn't exist. Now... In a very dumbed down way, how do I fault find this issue? Doubt it has any relation but I changed the radio to an android unit, doubt any car functions reside in the radio but hey, everything is worth mentioning. I want to learn, but excuse if I sound dumb
×
×
  • Create New...