imran999 Posted December 2, 2016 Report Share Posted December 2, 2016 4 weeks to go till my golf r goes back, and i have 2mm left on the front tyres and 3.5/4 left on the back. Will i get away with swapping the fronts to the back or am i looking at getting some part worn tyres fitted? If needing to replace, will continentals fit the same class of tyre needed ? Quote Link to comment Share on other sites More sharing options...
SevenR Posted December 2, 2016 Report Share Posted December 2, 2016 how does the wear compare to the thread depth guides in the tire tread? If the total tread depth is .5mm minimum above the wear guides you should be fine Quote Link to comment Share on other sites More sharing options...
imran999 Posted December 2, 2016 Author Report Share Posted December 2, 2016 Found a pair of part worns with 3.5mm tread on them for £38. Conti sports Quote Link to comment Share on other sites More sharing options...
Leo9 Posted December 2, 2016 Report Share Posted December 2, 2016 Found a pair of part worns with 3.5mm tread on them for £38. Conti sports That's good as far as matching tread depth is concerned, but not if they're a different make to the rears. Unless you like living dangerously or are prepared to slow down and allow a good safety margin for different ride/handling/response characteristics. It is for only a few weeks. Quote Link to comment Share on other sites More sharing options...
imran999 Posted December 2, 2016 Author Report Share Posted December 2, 2016 It's only gonna be for approx 2 weeks then someone else's problem. Quote Link to comment Share on other sites More sharing options...
robdfr Posted January 2, 2017 Report Share Posted January 2, 2017 Found a pair of part worns with 3.5mm tread on them for £38. Conti sports You need to contact your leasing company. There is a list of approved tyre manufacturers that you can have fitted , iirc there are 4. if your tyres are not on the list and you return the vehicle expect to be charged for 2 new tyres. A phone call will cost you nothing , so worth checking. Quote Link to comment Share on other sites More sharing options...
imran999 Posted January 16, 2017 Author Report Share Posted January 16, 2017 I left the original fronts on. Collection guy measured at 2mm so plenty to spare. Quote Link to comment Share on other sites More sharing options...
Leo9 Posted January 16, 2017 Report Share Posted January 16, 2017 I left the original fronts on. Collection guy measured at 2mm so plenty to spare. Result! Quote Link to comment Share on other sites More sharing options...
imran999 Posted January 16, 2017 Author Report Share Posted January 16, 2017 Can use the part worns on the gti now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.