Jump to content

J4m1e5

Members
  • Posts

    24
  • Joined

  • Last visited

Everything posted by J4m1e5

  1. I was considering upgrading but just couldn't justify the cost. I got all the work done for £400 for clutch and slave cylinder.
  2. Completly standard mate. Didnt bother getting it mapped and dont think i will tbh.
  3. Got a new genuine VW clutch fitted yesterday and also told them to replace the slave cylinder. Massive difference now! PS: if anyone is looking for a slave cylinder I have one that's done 20000 miles nothing wrong with it. Cheers
  4. I know what you are saying but nothing else has changed. At the end of last week I was getting the problem and now I'm not due to opening the exhaust flap. I shall give it more testing before I go ahead with the clutch.
  5. Now before I start I may be going completely mad here! I posted a week ago about my clutch slipping, or the effects of this, whilst driving under load. I've organised a new clutch to replace it. Aside from that, I thought I would carry out the 'flapper mod' to the exhaust. I got under the car only to find that the pin that engages the mechanism for the flap to open had come off, therefore the flap has never been open since I have owned the car! I put the pin back in position and carried out the flapper mod. Now, took it for a spin and I'm please with the exhaust note difference but the main change is that the 'clutch slipping' symptoms seem to have dissappeared. Could this flap not opening at all cause such problems, please tell me I'm right. Any help would be great before I cancel my clutch order
  6. Hi, i have come to the conclusion that my R needs a new clutch kit fitted, even although it has only covered 20K, its slipping pretty bad under load. My question is would it be worth getting a Sachs SRE or just another OEM clutch kit. Whats the rough prices of the two? Im getting the SRE coming in at £550. Any help would be appreaciated
  7. Sounds as if there are quite a few with the same issue. My problem is that mine is out warrenty. If someone could take theirs to VW under warrenty and get it sorted out id be interested to know what the initial problem was/is.
  8. Yes it pretty much only happens when im cruising then apply more power. If i rev up through the gears its fine. Its not had a hard life at all, dont ride the clutch and no burning smells etc. Would this be logged as a fault code to be sure of the problem before i go replacing the clutch?
  9. Its a 10 plate on 22k miles. Totally standard manual box
  10. Think my clutch is slipping. When i accelerate the engine revs change and it doesnt go anywhere then it will kick in again. Whats involved in fitting a new clutch?cost etc? Would this be logged as a fault also? Sorry for the vague description
  11. I stay just outside Glasgow mate. Met up with Graeme(gman) a few weeks ago.
  12. Nothing worse mate esp if you have just put a wax on it! Its strong stuff that screen wash.
  13. Thanks Greame, top man. U certainly know your stuff mate. The headlight washer fault was a blown fuse (no 36)Â Â Think i will just leave it out and pop it in when its MOT time, hate the screen wash going all over the bonnet etc. Thanks again bud Jamie
  14. Where abouts mate? No problem at all, do you think it will be the coding? Also when suits you? Cheers mate
  15. Dont think there is many people with VCDS from around here! Can anyone else think of any other alternative?
  16. I will do. What are we talking to get up and running with VCDS? As in equipment, software and price?
  17. Thats what im hoping for. I was going to strip the dash and check the connections at the back of the unit. I live just outside Glasgow, can anyone help at all? Thanks
  18. Hi, i picked up a great spec 10 plate golf r last week. When i bought it the seller explained to me that the only thing wrong with the car wae the rear view camwra diesnt work, so im eager to fix it! When i put it into reverse the rear badge flips up but the only thing i see on the screen is the parking sensor screen instead of the camera. The seller had a RNS 510 fitted and it hasnt worked since. Im unsure if its a coding issue or hardware issue. Im assuming that it was a RCD 510 that was fitted previous. Could anyone help Cheers
×
×
  • Create New...