Jump to content

AmonR

Members
  • Posts

    18
  • Joined

  • Last visited

Everything posted by AmonR

  1. 237 Error status for start-stop related sensors-Sensor_1 238 Error status for start-stop related sensors-Sensor_2 239 Error status for start-stop related sensors-Sensor_3 240 Error status for start-stop related sensors-Sensor_4 241 Error status for start-stop related sensors-Sensor_5 242 Error status for start-stop related sensors-Sensor_6 243 Error status for start-stop related sensors-Sensor_7 244 Error status for start-stop related sensors-Sensor_8 channels 237 to 244 amongst others...
  2. VCDS can tell you the what caused the error - there are many channels relating to start-stop in the Advanced Measuring Blocks.
  3. Anyone definitively worked out this? Do you just put the R in Race mode, in sport, launch and go withouth lifting the throttle and without manual gear changes. Are the S gear changes the optimum for the fastest times? Does anyone change manually and any preferences for particular RPM shifts? Thanks,
  4. Mainframe, do you have a reference for that? see here: http://www.volkswagen.co.uk/about-us/news/621 4MOTION.The new Golf Alltrack was designed for good performance on both asphalt and light off-road terrain. The 4MOTION all-wheel drive system is the technical foundation here, equipped with the latest generation Haldex coupling, which activates even before slip occurs and prevents nearly all losses in traction thanks to a proactive control. Under relatively low engine load conditions, or when coasting, forward propulsion comes primarily from the front axle, while the rear axle is decoupled. This basic drive layout saves on fuel. If necessary, the rear axle can be variably engaged within fractions of a second. This is done by the Haldex-5 coupling, which is activated via an electro-hydraulic oil pump. A control unit continually adjusts the ideal drive torque for the rear axle and controls how much the multi-plate clutch should engage by activating the oil pump. If necessary, nearly 100 per cent of the drive torque can be directed to the rear axle.
  5. The current belief is that it is an unbalanced propshaft. They will remove and drive the vehicle as a fwd. This morning i drove to a high speed in Eco mode and got off the accelerator. Car was coasting and vibration was still there. They said propshaft will still turn as long as back wheels are turning. Maybe I should put the car in dyno mode and test on a dyno??
  6. I have requested they do trade-in calcs/scenario's for me on a new R. 3 to 6 month waiting but at least I might get a R that i will be happy with...
  7. AdDaMan, please could you elaborate or share your thinking? My mileage is less than 2000 miles - can new bearings be problematic?
  8. Thank you OryxR but no i do not have keyless entry - its also a proper vibration and not a noise, rattle or squeal. The faster the vehicle moves it even starts to shudder
  9. Upon reading further, it is not recommended to switch between neutral and gear with DSG. Maybe i can get there in Eco mode and step off the accelerator? Will the drive train be disengaged in this way?
  10. Its a R not a GTi Thank you Stobsie - My dealer is waiting for guidance from VW HO and I will ask them to to validate these measurements for me. I do feel it through the steering wheel as well as the firewall. Was reading up now... and there was a recommendation to put car into neutral at high speeds and see if problem persists as this could indicate wheel/tyres/rotors. Would this be OK to do with DSG?
  11. Hello, I have my R for about a month now and from the day of delivery i experienced a vibration at high speeds. It becomes noticeable above 100 mph and seems to increase in severity with speed. I have balanced tyres several times and finally I swapped the wheels and tyres (completely different wheel and tyre). The problem still persists and around similar speeds. Any thoughts and experiences will be appreciated. My dealership as never encountered this issue before and there was talk about an unbalanced propshaft or something like that. Thanks,
  12. I saw oil temperature and digital speeds this morning (thank you all). Have not gone pass 100 miles yet - picked up car on Friday
  13. same sentiment as speeddemon.... didnt refresh thread when i posted...
  14. How can I get oil display on my instrument cluster?
  15. Maybe this can be done with VCDS? Does the 7R come with a maf or does it is it based on manifold pressure measurements?
×
×
  • Create New...