Jump to content

montecarlo

Junior Members
  • Posts

    47
  • Joined

  • Last visited

Everything posted by montecarlo

  1. Looks great. I wonder whether you can have the gear displayed in BIG numbers on the center display. Like the displays used with sequential shifters.
  2. The vent flaps in the body are exactly at this location behind the bumper. Here is a theory: It must have been quite cold outside and quite warm inside the car, so the air escaping out of the vents must have thawed out the icy, dirty spray from the tires. 😁
  3. I'm also running stage 2 (APR software & catless downpipe). For power, you don't need full exhaust, the downpipe will be enough. The hot exhaust gases will have cooled down considerably by the time they reach the resonator, the exhaust gas volume will have almost halved and the stock pipe diameter will not cause a restriction. For sound, you may go the full exhaust route, but I find the downpipe in conjunction with VWR R600 intake and GFB DV+ make all the sound I need, especially with the exhaust flaps coded permenantly open.
  4. As the title says, does anyone know the standard rates of the coil springs, front & rear?
  5. Turn traction control fully off, and accelerate from standstill. You'll be able to feel if the fronts are spinning and if the rears are not engaging. You can also have someone outside watch as you accelerate. That would be the easiest way to determine whether there is a problem with the haldex. Mine is stage 2 and will spin all four wheels on wet and greasy roads.
  6. I would like to get slightly stiffer springs, but I cannot find any that are NOT lowering springs. Therefore, I would like to get some custom made. Does anybody now the specs of the standard springs (length and rates) front and rear on DCC cars?
  7. For those of us, who want more camber in front suspension but do not want the irritating noise they make on anything other than perfect surfaces, offset top mounts are a great alternative. For those that may not be familiar, these are basically OEM style rubber top mounts, with the difference that they are not perfectly concentric, but the mounting position is shifted towards the inside of the car to provide a higher camber value. Since they are still rubber compound, they are silent and offer a great compromise between comfort and road holding. The available camber value depends on the car's top mount design limitations, but I have seen some offering around 2-2,5 degrees camber. Is someone offering offset top mounts for Golf Mk7 R? Or is there a possibility to bring it up to potential manufacturer?
  8. Hi Speeddemon, thanks for the explanation. It makes a lot more sense to me now. I suppose V2.5 is too aggressive, but I think that it may be possible to iron out the problem area as Msportman has reported.
  9. Thank you. Tried that. Had no effect on the problem, but at least eliminated one potential component.
  10. Thank you for the suggestions. :afro: I wish I could have read them before visiting the local APR dealer. I am guessing that they might not have the equipment for it, because they have not suggested logging, but going back to V2 (from V2.5) and shoot an email to APR with the specifics of the problem for further information, and I agreed. Coming back home from the dealer (25km, 15 miles), I have not been able to repeat the problem, so it might be a problem/incompatibility with the v2.5 map. By the way, I had also taken off the GFB DV+, but saw that it had no effect on this problem.
  11. I did not have the parts I had taken off of the original DV with me, so could not do that. Now that I have them, I will check that as soon as I find some free time.
  12. Recently I've been having some trouble with the my R. Some time after my APR Stage 2 software was flashed to version 2.5, I started to feel that the car was less smooth under load. However recently, when revving up and going through 3500-4000 rpm range (heavy load, but not fully WOT) the car hesitates so severely it feels as if I am pressing and taking my foot off the gas very quickly and repeatedly -upto 3 times in a row- before continuing normally. I have also realised that this happens sometimes in less exaggerated form, but the DSG feels the load easing off and upshifts earlier than normal, and when the load builds again within a few miliseconds it downshifts quickly depending on how hard I happen to be pushing the loud pedal at that moment. I have APR Stage 2 version 2.5, APR catless downpipe, VWR 600 intake, GFB DV+, Audi S7 plugs on my 2015 R. By the way it does not feel/sound like an electrical cut-off at all. There are no fault codes registered. When on really aggressive driving, the car feels strong and normal, but as I said not as smooth as before. While on WOT, the car rarely goes through 3500-4000 rpms, as the gearbox tries to keep the revs up, and no problems. Honestly, I have not tried manual shifting with WOT through this rev range, as I could more or less repeat the problem with 3/4 of pedal movement. I am not putting the blame on APR or anything; I didn't even have the chance to contact their dealer here yet. I am just writing to you guys to see if anyone had a similar problem and may suggest something that I cannot think of. I have checked the coils for any play and re-oiled the cylinder in the GFB DV+, but this has not changed anything. I have also tried engine on normal and race modes to see whether the different mappings have any effect on this, but there is no difference. Sorry for the long text, I hope someone can shed some light on this.
  13. I am pretty sure that turning XDS & ESC off and adding a front LSD will transform the car on track as well. I will just have to try that (maybe this spring) and report. Perhaps that might interest you (and others).
  14. Just wanted to report back on my efforts to turn off the electronic nannies and have the car behave on low grip surfaces (like snow and ice) closer to a Subaru or Mitsubishi. The ESC Sport / ESC OFF button works actually perfectly and there is no need to mess with that further with the OBDEleven or VAGCOM as I previously thought. However, in order to fully release the electronic controls, the XDS needs to be turned off as well. To make the long story short, I have turned off the XDS with OBDEleven and oh man! What a revelation! On snow and ice, the R still wants to understeer initially, but with the right weight transfer you can hang out the tail and continue to powerslide properly through the turns, without the electronics suddenly jerking the car to a line that you did not intend or want. :afro: Now, if I add a proper LSD to the front differential and some Bilstein B16’s, I think I will have the best of both worlds. Golf’s refinement and close to Subaru/Mitsubishi handling! Fantastic! How XDS works and why you need it off (AFAIK): With an open differential (which G7R has), on high grip surfaces, the inner wheels become unloaded through the turn and the power “escapes†through the inner wheels, spinning (slipping) them, and not driving the outer wheels which have more grip. XDS brakes the inner wheels, forcing the power to outer wheels, which have more grip. This both helps with the turn in and helps to drive the car forward (rather than spinning the inside wheel). The way XDS interacts is actually quite complicated, as it receives information from various sensors and can interfere even before the slip starts. This also works to some extent on snow and ice, but of course to a much lesser degree as the grip is much lower, and the inner wheels do not become as unloaded as in dry asphalt. However, when driving aggressively and when trying to induce a powerslide, with XDS on, the car starts doing things that are not in your control and behaves unexpectedly as the electronics kick in and out. During daily driving, this behaviour is actually quite safe, but if you would like to drift and powerslide through the corners (on a closed circuit, of course), XDS intervention can become even dangerous, because you cannot predict the car's exact trajectory. Please note that in case of an accident, having the electronics turned off may be a liability. I would not recommend trying this on public roads.
  15. I have looked at this: http://www.golfmk7.com/forums/showthread.php?t=25343 and this: http://www.golfmk7.com/forums/showthread.php?t=21888 Having read a few threads, following the links you have provided (thanks!!) I think I do not need to do anything as far as turning the ESC OFF, as the R apparently has this as standart (versus GTI). I am going to check for the "Starting Vibration Reduction" and bring that to the lowest setting. All of this will need to wait a couple of days, as I have no time to change and test at the moment.
  16. I had not. Thanks. I think I am going to try the ASR OFF / ESC OFF V2. To go back to normal, it should be ESC SPORT / ESC OFF (since this is the standart for the button behaviour), but I can't figure out why there would be versions. But first, I am going to do some more search for the long codes...
  17. I don't think you can deselect in OBDEleven apps. You'd need to select another option. I have not been able to find the long coding either. I wasn't going to turn off ESC permanently originally, but browsing through the applications, I saw ASR OFF / ESC OFF option and thought that might do more than what the button does now (just ESC OFF). I am not very happy with the handling characteristics of the R on snow and ice and I am looking for ways to prevent electronics from intervening too much.
  18. I'm not that brave really. Still haven't done it. Not because the options are confusing, it's because there is no option to go back to standart. No reply on the OBDEleven board unfortunately.
  19. Hello, I have tried to turn ESC Off permanently using the app. However, there were 5 options to choose from: * ASR OFF / ESC OFF V1 * ESC SPORT / ESC OFF V1 * ASR OFF / ESC OFF V2 * ESC SPORT / ESC OFF V2 * ASR OFF / ESC SPORT Does anyone know the difference between these? Since I am doing it via apps, I don't want to potentially do it 5 times and spend 50 credits. I have also asked this on the OBDEleven forum a few minutes ago.
  20. I did a search on this topic and replied without noticing that it was a very old thread. Anyway, I would appreciate any new info/comment...
  21. I have the same problem in my 2015 R. I am using OZ Ultraleggera wheels that are very light and wheels/tires have been perfectly balanced. The wheel bearings seem to be in good shape too. I am not sure whether the rear wheels can be balanced on the car by jacking both the rear wheels of the ground. This would normally help, but I have a feeling that this may not be recommended. Does anyone have any info on this?? I believe when the car is on fwd only, the rear haldex decouples, and the driveshaft continues to turn, therefore the driveshaft unbalance cannot be ruled out without completely removing it.
  22. The best compromise for me is: DCC: Sport Steering: Normal Engine: Normal Dynamic bend lighting: Sport Air conditioning: Normal I believe that with low profile tires, soft suspension settings do not work very well, and with one pull of the DSG transmission I am in (almost) Race mode.
×
×
  • Create New...