Jump to content

marknjayne

Junior Members
  • Posts

    42
  • Joined

  • Last visited

Everything posted by marknjayne

  1. Do you have any info on it buddy ,I can't find it ,any of these ?
  2. Hi ,after lowerng my car I notice the headlight dipped beam is too low now ,how do I reset or adjust it via OBD11,also I have had enough if the rear wiper washer thinking it's cleverer than me when all I want is to wipe the rear window every so often it decides to get all clever and give it a wash too when it's just not needed,is there a way to code this not to happen?
  3. Yes T/C fully off made no difference unfortunately
  4. decided to give map 2 a blast today...makes a nice difference ,i will save this map for when our lass is not in the car hahaha https://www.dropbox.com/s/3qu59swy13mjt9s/log.csv?dl=0
  5. did a log on map 2 with the JB4 this evening https://www.dropbox.com/s/3qu59swy13mjt9s/log.csv?dl=0
  6. Yes about 500rpm lower it's fine and drops into the next gear and pull immediately but changing at the redline in any other car does not give these issues ,why have the redline at that rpm if you can't utilise it because they put a Nanny state compensator in...its got to be a fault because not everyone has this issue,I just wish I knew what it is so I can sort it
  7. I tried every setting but preferred the standard feel so sold the pedal box on
  8. Very possible but tbh why would they have a rev limiter and a high/over rev compensator ,seems a bit overkill when they could just lower the redline
  9. Yes sounds exacrly the same as mine,mine did it before the JB4 was fitted too ,I'm also wondering if it is the fly by wire throttle lagging but I fitted a pedal box and tried it on the highest setting and it was the same
  10. I have owned 47 cars including 8 skylines...i know how to change gear lol...feels more like an electronic issue like traction control or a bit like timing being pulled for a split second
  11. Also makes no differentce when traction control is fully off
  12. Hi Matt,car already has the delay valve and helper spring removed and awaiting the stopper in the post
  13. Hi ,when driving hard and shifting just before hitting the redline (mainly 3rd to 4th but does happen occasionally in other gears) i get about half a second loss of power before the car gets back on with the job of accelerating,only happens when i change near the redline,i have checked for any codes etc but nothing showing up,im using a JB4 but it happens in all the maps i select and without the JB4,feels like its got to think about it before it accelerates again,has anyone ever had this and solved it,any pointers ??
  14. It did yes ,would have been interesting to see it run on map 2
  15. First run (Tom) was map 6 ...he changed maps at the bottom to see if he would run any better and he did as you can see ...the otger map 6 was on a JB1 as you can see
  16. Saturdays Golf R dyno day the two cars running map 6 made really low figures ,theyswitched to map 2 made made a substantial increase so I will just stick to the preloaded maps tbh
  17. Map 2 is the aggressive map though ,no glod for a manual car on a stock clutch surely or to do accurate logs if the clutch slips ,would have thought logging the stock car would have given a better log
  18. If you look on page 1 it states map 4 is a stock map for logging
×
×
  • Create New...