Hi all friends, I'm coming to you for a concern, I made the retrofit of the heated steering wheel, so I followed several almost similar tutorials on different forums for connections, everything is connected and normally well coded but I have an error in module 16 as you see in photo and impossible to make it disappear, I put in detail what I achievedso I bought the steering module with the following reference, 5q0953549D I was told that I could take either the version that ends with D or B, I managed to find the D, so I bought a socket 14 pins because of origin I have a 16 pin socket, so I changed the cables from their location to the new places everything was written on the tutorial, so I just have a ground and a + to connected, I connect the ground to a ground, then the + with a fuse holder on the sc5 fuse with 2 fuses of 10, I start the vehicle I code the module 16 all the errors disappear except 1 that you see in the photo, at this moment the n had not received my heated steering wheel I said to myself when I have it it would be different, 3 days later I receive my steering wheel, I dismantle the old one and plug it in, and the error does not disappear, I do not arrive not understand, the steering wheel is new, I would like to understand with you, when I press the logo of the volan t on the 5f it turns on and off immediately, I would like to understand this error and repaired this problem, and also resume the entire coding of the heated steering wheel never knows.Thank you for your help