Jump to content

Mrbxx

New Members
  • Posts

    4
  • Joined

  • Last visited

Everything posted by Mrbxx

  1. Hi Greg, That was from a cold engine yes, below are the readings when up to operating temperature IDE00025 Coolant temperature 97 °C IDE00187 Coolant temperature at engine start 54.0 °C IDE00192 Coolant temperature at radiator outlet: actual value 20.5 °C IDE00193 Coolant temperature at engine outlet: specified value 97.5 °C IDE00194 Coolant temperature at radiator output: specified value -48.0 °C IDE00195 Coolant temperature difference between engine and radiator 79.5 °C IDE03377 Coolant temp at radiator output: unconditioned voltage 3.521 V IDE06396 Coolant temperature at engine outlet: unconditioned voltage 0.840 V Went into limp mode again on the way home last night, temperature gauge went to 100c then down to 80c and back to 90c. Restarted the car and all good! Is it worth replacing the radiator sensor before anything else?
  2. I am also getting the below readings on vcds IDE00025 Coolant temperature 13 °C IDE00187 Coolant temperature at engine start 12.7 °C IDE00192 Coolant temperature at radiator outlet: actual value 14.0 °C IDE00193 Coolant temperature at engine outlet: specified value 13.5 °C IDE00194 Coolant temperature at radiator output: specified value -48.0 °C IDE00195 Coolant temperature difference between engine and radiator 0.0 °C IDE03377 Coolant temp at radiator output: unconditioned voltage 3.787 V IDE06396 Coolant temperature at engine outlet: unconditioned voltage 3.811 V Thank you
  3. No smells to my knowledge and when i turn the car off and on again it runs as normal at 90c. Would a faulty water pump or coolant leak put the car into limp mode? I suppose if that is the only code I'm getting (P00B7) on vcds it has to be related to coolant flow/water pump/ thermostat I'm going to drive it with vcds connected and check live temperatures when the car goes into fault. See what readings the coolant temp sensor is giving Thanks for your help
  4. Quick question, I have my EPC light coming on a limiting the car to 4000rpm, the temp rises above 90c at the same time this happens. As soon as I switch the car off and on again everything is ok for a while. VCDS faults codes are relating to cooling / coolant flow insufficient. Do you think thermostat or coolant temp sensor is faulty and would this put the car into limp mode? Thank you
×
×
  • Create New...