Search the Community
Showing results for tags 'Dynaudio'.
Found 3 results
-
Hi, I’m retrofitting my 2014 Golf 7 (base audio) with OEM Dynaudio speakers (front mids, A-pillar tweeters, rear speakers and rear tweeters) and a Dynaudio spare wheel subwoofer. Instead of the OEM Dynaudio amp, I’m installing a Match UP 8 DSP https://www.audiotec-fischer.de/en/match/amplifiers/up-8dsp . I have a few wiring questions: Door speakers Each speaker (mid and tweeter) has 2 wires. I’ve seen people mention “repinning pin 3 and 4” or swapping wires at the door connector or behind the unit inside the glovebox. Do I need to repin anything when using the Match UP 8 DSP? Is the pin swap only needed when installing the OEM Dynaudio amplifier? Are Dynaudio mids wired with reversed polarity compared to base speakers? There are no + / − markings on the Dynaudio speakers, so I want to be sure before wiring everything. Subwoofer The Dynaudio spare wheel sub has 4 thick wires, I have only the the connectore and short wires(cutted) that go to the subwoofer and will need to make a new cable with a plug that goes to the amplifier(which I plan to install in the glovebox). How should I wire the cable, or is there a cable that I can just buy to connect the sub to the amp? Thanks 👍 -
Hello, everyone! I am new here and unfortunately i have a problem... I bought dynaudio system for my golf, 8 speakers and amlifer ( blaupunkt 5k0035456) i have connected all wires and everything but its keep blowing the fuses.. have someone have experience about this sound system?
-
Hi, I bought a 61 Mk6 Golf R at the Weekend that has front and rear sensors, bluetooth, RCD 510 and Dynaudio installed. I was wondering as when i start up the RCD 510 at the bottom of the screen it says 'Dynaudio'. I was wondering if it is possible to upgrade the head unit to a RNS 510 with Nav, DVD, and TV on? Does it need to be a Dynaudio head unit or does it appear when the head unit is coded to the car? Thanks in advance,
