Revs Posted February 14, 2017 Report Share Posted February 14, 2017 AFTERNOON ALL. i used the app on obdeleven to code my exhaust flaps to be open in all modes a few weeks back, everything was fine for a while but noticed one day that only 3 of the tail pipes were getting dirty and the passenger side left tail pipe was clean. on closer inspection i can see that the flap is closed on that side but open on drivers side. tried with obd11 to put back to standard but will not except code. anyone else experinced this who could give me an idea on how to fix, or do you think i should get under there with a can of release oil and see if i can work it loose. its 2014 r, still under warranty but not sure about taking it in to dealers as would think they would notice that iv changed the coding! any help would be much appreciated!! Quote Link to comment Share on other sites More sharing options...
Stealthmode Posted February 14, 2017 Report Share Posted February 14, 2017 Disconnect wiring plug? Quote Link to comment Share on other sites More sharing options...
Revs Posted February 14, 2017 Author Report Share Posted February 14, 2017 and would that reopen the flap, i was thinking it mite be stuck with all the winter crap from the roads? Quote Link to comment Share on other sites More sharing options...
MK7RLAPIZ Posted February 14, 2017 Report Share Posted February 14, 2017 Sometimes even after coding them closed again they will all remain open. What worked for me was to disconnect the battery. Not sure why? Also make sure ignition is on but engine is off when doing the coding Sent from my SM-G935F using Tapatalk KashR 1 Quote Link to comment Share on other sites More sharing options...
Revs Posted February 15, 2017 Author Report Share Posted February 15, 2017 thanks for the help mate, i did have the ignition on and was in race mode when i tried to recode them again, tried coding them closed and reopen again but both times coding was not accepted?? il try and disconnect the plug on the exhaust and then battery if that dont sort it. Quote Link to comment Share on other sites More sharing options...
marshy Posted February 15, 2017 Report Share Posted February 15, 2017 The times I've coded my flaps I've experienced the coding not accepted. For me I found locking and unlocking the car solved the problem. Then just ignition on and coding was accepted. I have known like others say that they appear not to work afterwards but again once the cars been locked then unlocked they've always worked fine. Quote Link to comment Share on other sites More sharing options...
Revs Posted February 15, 2017 Author Report Share Posted February 15, 2017 cheers for your advice marshy i think the coding is not being accepted because, one flap is open and the other side closed! so obd11 cant change it, to either open or closed as they are both that at the same time. soon as it stops bloody raining im going get under there and see wot i can find wrong. would you think the dealers would try recoding it and notice that it has recently been coded to be open all the time, or should i take the chance and try get it done under the warranty?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.