Jump to content

Jenson_7r

New Members
  • Posts

    11
  • Joined

  • Last visited

Everything posted by Jenson_7r

  1. that’s slow for stage 1 mate, mine does 3.4 stage 1
  2. I have the same problem for weeks and no resolution yet, had my car mapped and they pointed out it wasn’t opening on WOT… no power going to the actuator either.
  3. If anyone has any ideas to open the valve manually I’m all ears 🤣
  4. Hi Andy! Yep tried that & the right side is still completely dead, output test on vcds worked for the left side, but right was nothing!
  5. scratch that, it won’t reach, which my plan was to at least get the valve/s open and code it out for now. there’s a strange plug near the exhaust flap plug which looks to be going behind the bumper also, which could be the plug for the rear parking sensors anyone seen this plug before?
  6. yeah will try this, got a second actuator to test, did an output on vcds and it was completely dead. Which now points to loom. there’s not a fuse attributed to the motor flaps are there?
  7. yeah mate will let you know, I’ve bought a second hand actuator and will run an output test to confirm if it’s the motor, or the power is messed up!
  8. thanks mate, I think my problem is, I can’t actually code them open until I can get the physical right flap open as it’s stuck shut! Isn’t there a fuse for this?
  9. Hi guys My car has just been in for mapping and the guys have spotted an issue where the right exhaust flap is stuck closed. (Only 3 tips are dirty/sooted have the fault logged as “ Valve for exhaust flap 2 “ - Open Circuit. what are my options here? Is it possible to manually open the flap and remove the flaps from VCDS or am I looked at replacing the actuator? I can see the values on vcds, but I’m not sure if there are options to cycle/test them ? any help would be appreciated, thanks!
×
×
  • Create New...