Jump to content

Security code for '17 Instruments'


Mark V

Recommended Posts

@jargo:Hi.

 

Alas, your post has a economy of words - meaning that there ain't much information provided!  For example, this thread is about VCDS generally - so we don't even know what car this is!

 

Just as a friendly suggestion that might be useful in prompting an informed reply - maybe  consider augmenting the question in your post with more words about the following:

  1. what Brand?
  2. what model?
  3. what build year?
  4. what country?

Don

Link to comment
Share on other sites

  • 2 months later...
  • Replies 20
  • Created
  • Last Reply

Top Posters In This Topic

@abubakarameer55: Hmm......... OK, the security codes in your first post apply to the ABS module - they don't apply to the TCM. 

 

AFAIK, the mechatronics module does NOT have a 5 x digit security code on MQB platform cars and if it does - I don't believe that it's needed for the Basic setting procedure.

 

Below is my understanding of the Basic setting procedure (which I thieved from the Ross-Tech forum - the procedure was authored by Dana@RT)

 

Note: the Basic setting won't successfully complete unless the mechatronic module is error-free

 

Don

 

Prerequisites:
Transmission fluid temperature between 30°C - 100°C confirmed using Advanced Measuring Values:
** IDE00102 Control Module temperature
** IDE00024 Transmission fluid temperature

Selector lever in Park

Engine idle speed, do not press accelerator pedal

Parking brake and foot brake applied during the entire procedure. This can be confirmed using Advanced Measuring Values:
* IDE02713 Brake Light Switch
* IDE02714 Brake test switch

0D9 - DQ250 MQB - Basic Settings Procedure:
[Select]
[02- Auto Trans]
[Basic Settings-04]
Select [Basic settings of transmission]
[Show Measuring Data] and select:
* IDE00021 Engine speed
* IDE00322 Status of basic setting
* IDE00024 Transmission fluid temperature
[Go!]

- During the basic setting procedure, there may be some loud gear shifting noises from the transmission, this is normal.

Basic settings may not complete successfully if:
- The fluid temperature gets too hot.
- Brake is released
- Engine RPM is increased

Once complete, there should be an indication of this in the [Status of Basic Settings] Advanced Measuring Value group and Basic Settings should report Finished Correctly..

[Done, Go Back] and Check for fault codes. 
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Current Donation Goals

    • Raised £170
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...