Roots Supercharger Posted April 5, 2019 Report Share Posted April 5, 2019 I would check if one of your N205 cam adjustment valves is playing up. 06E 103 697M. Stefan88 1 Quote Link to comment Share on other sites More sharing options...
RockR Posted April 5, 2019 Report Share Posted April 5, 2019 (edited) On 03/04/2019 at 22:28, blower said: Ok, well UK model rules out any intake coking build up. With those errors you have, it does indicate the timing is somewhat out. Could be a sensor issue but less likely as the fault is a correlation rather than an intermittent electrical fault. If the timing is out (due to chain stretch or tensioner issues) then symptoms will be a lumpy idle and a general reduction in power. Clear the errors, see if they come back after a good drive. What does the UK model do to avoid carbon build up? Edited April 5, 2019 by RockR Quote Link to comment Share on other sites More sharing options...
blower Posted April 5, 2019 Report Share Posted April 5, 2019 13 minutes ago, RockR said: What does the UK model do to avoid carbon build up? It has dual injection - direct injectors as well as port injectors. The port injectors are used at low load and idle, as all port injectors - they spray fuel onto the back of the intake valves, so wash them clean of any carbon / oil. You can still get some build up in the intake manifold itself, but this isn't really a problem unless you have serious mileage (well over 100k), and even then it doesn't really affect the running. Its the carbon build up on the intake valves and ports that always caused the driveability / mpg issues and this has been completely negated by the port injectors. Quote Link to comment Share on other sites More sharing options...
RockR Posted April 6, 2019 Report Share Posted April 6, 2019 On 05/04/2019 at 15:34, blower said: It has dual injection - direct injectors as well as port injectors. The port injectors are used at low load and idle, as all port injectors - they spray fuel onto the back of the intake valves, so wash them clean of any carbon / oil. You can still get some build up in the intake manifold itself, but this isn't really a problem unless you have serious mileage (well over 100k), and even then it doesn't really affect the running. Its the carbon build up on the intake valves and ports that always caused the driveability / mpg issues and this has been completely negated by the port injectors. Thanks buddy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.