RobH
Members-
Posts
96 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by RobH
-
What turbo are they using for the 450 package? TTE have discontinued but are working on something else as a replacement!
-
Its not a hybrid its a EFR turbo kit APR have got lined up. DSG been fragile is overcooking it a bit aswell considering how much power ive seen put through them over the years!!
-
Be good to hear what you think of the handling mods im tempted by the superpro kit and had b16s on my last car. The s3 needs livening up a bit still totally stock in the chassis department Also is that tfsi mikes old Cupra in your garage?
-
So the guys from Bahrain, he got it mapped in Dubai says it was mapped back to stock... But was it his original file that went on, doesn't seem like it if VW discovered it. Long way to send a broken car to have it flashed to stock... I dunno something tells me not all was done right.
-
I guess this is like the anti lift kit on the mk5 back in the day people used to rave about. Shame they didn't add slightly more neg camber to it an extra degree would have been decent. http://www.superpro.com.au/superpro-parts/?p=superpro-supaloy-arm-kit-aloy0006k&view=part&id=ALOY0006K&cid=999501495&vid=37856
-
H&R do them plus all of these http://www.awesomegti.com/car/vw/golf-mk-7?subpart=AntiRollBars It says it fits S3 so should fit the golf R.
-
Nah disagree with that, on the 2.0tfsi cars Evoms, ITG and Revo intakes were the best performing easily. I don't see why it should be any different on these cars with decent heat shielding and some ducting. APR's enclosed efforts arnt exactly setting records as per usual just like the carbonio.
-
Turbo kits for the 7r should be easier and cheaper as the manifold is built into the head so no need for expensive aftermarket manifolds which should save you like £1k. Nortec and statllers will be doing something for the 7r but no idea when maybe towards the end of the year something might surfice I think steve mentioned he sent them an engine to get started on. I think the saving is around 15-20kg on a Ti exhaust 15kg on brakes with a two piece setup Not sure about wheels but on my old cupra was something like 16-20kg with pro race 1.2's so maybe something in that ball park, so you've 50kg saving right there and you havnt touched the interior. Exhaust will be expensive though £3k maybe and the two piece disks are around £1k so you'll need deep pockets.
-
Scorpion will do you a titanium system. Mines goes back there in a few week to check fitment of their new valved exhaust. im sure ive seen carbon hoods available too but much easier fitting lightweight wheels and seats first, also the brakes are very heavy, you can lose possibly 15kg with a two piece setup from vagbremtechnik. 50kg should be fairly easy to lose tbh.
-
Yeah I reckon you'll get more power the engine runs really hot as it is, even in at 10 degrees ambient you cant touch the engine cover after a long run. Specific mapping will obviously help but I reckon an ic will get you gains easily.
-
If its on 11th ill probs make the trip down.
-
Haha I went to tgi's first and then went to ikea... left with a candle
-
Ha no that wasn't mine, I have an S3. You wouldn't have seen mine, came and went before you'd left. So another golf R must have parked after me!
-
Parked next to you yesterday in ikea, looked very clean and sat well on those vwr springs. Was still there when I got back which tbh isn't a bad thing as mine is filthy at the minute.
-
Is there any guarantee from dtuk about keeping warranty intact? Just curious but i'm wiling to bet they have the same stance as Revo and APR etc...
-
There just covering there own backs though, that's pretty standard procedure for such a big company is it not, disclaimers have been around for rather along time no? It seems people just love dragging this up at every chance they get. As it stands right now you can map back to stock and be undetectable, until that changes why keep bringing it up at every opportunity. If your so bothered don't tune your car...simple!
-
Certainly more than 5bhp to be had with a full tbe mine did just over 20hp on standard map. Ive had a scorpion on now for nearly 12 months they've just developed the valves so will be going back to get a valved exhaust fitted in the next few weeks along with rolled tios as apposed to straight cut ones.
-
A map that's kicks in at 1500rpm doesn't necessarily mean that's a better thing though. The boost will tail off earlier and you'll have less top end grunt, which is surely where you want most the power. I like a good kick in the back low down as much as the next guy but not at the cost of high end power. Tbh its never gonna properly kick in at 1500rpm anyway just from the way a turbo works.
-
I doubt there will be one tbh. The new RS3 has carried over the 2.5tfsi so I doubt VAG is gonna design a new engine configuration of 400hp+ for one limited number run car which the R400 would be. If the new RS3 had a 2.0tsi with 360hpish then the possibility of an r400 might have legs... And not sure on the better value part when id say the r400 will be at least £40k. That's a lot of turbos to go pop before it works out cheaper
-
True, look ive been told by various tuners that when mapped back to true stock ill be fine and its 100% possible and all dealers should be able to do this! If the dealer you spoke to says he cant then you really should be avoiding it! Speak to revo if your unsure at end of the day and make them aware of the dealer your getting conflicting advice from. On another note, if your leasing I personally woudnt dream of touching it unless you have £30k sat in the bank!
-
Why don't you ring Revo themselves!!! Whos going to know more about the software and the ECU the people that calibrated it or the people that plug a lead in to your car and press a button!
-
People like to modify there cars and your in the tuning section......