Jump to content

Mayhem

Members
  • Posts

    42
  • Joined

  • Last visited

Mayhem's Achievements

Advanced Member

Advanced Member (3/9)

4

Reputation

  1. Very true. Most of the 0-100kmph times are also done with launch control which in a normal situation you probably wouldn't use unless it was a "organized" run. I've had my 7R for about 12 months now and done 15,000km and while 0-100kmph it is a 5 second car. In real life situations it feels more like a 6 or 7 second car and I've had older V8's which on paper I should smoke, keep up with me from a roll on.
  2. I always thought it was the wastegate but it seems like the guys on the other forum are pretty certain it's the DP. It would be good to find out if everybody that had done the DP upgrade had removed the ringing sound. It could be that by installing the DP or a full new system, the car is much louder and it just covers up the noise?
  3. Thanks mate, I will check this out when I get home from work
  4. I've had my R for almost 12 months and done 10,000km. The noise is definately the worst "feature" on the car.. It's been months since I've been on VW forums but I'm guessing that there's still no fix for the issue?
  5. Hey Mate, Do you happen to know the part number for the grill without the hole for the ACC sensor?
  6. Will be keeping an eye out for this project
  7. I have recently purchased a Flow Design Front Splitter for my Golf 7R. It is similar to the Maxton design that you guys have in the UK. The problem I have is trying to get the undertray off, specifically the bit at the very front of the Golf R. The bit that is attached to the bottom of the bumper. The other pieces of the undertray seem pretty easy to remove with just a few screws but it seems the very front part may be clipped into the bottom of the front bumper some how. I would appreciate any help from people that have installed a front lip on the Golf R Mk7. The reason I need to try and remove or loosen this front bit of the undertray off is to get my hands inside the bumper to attach a nut to the bolts to hold up the front splitter.
  8. Was planning on doing the same thing until I noticed the feint metal ringing noise. Now I plan on keeping the Soundakator on and have learnt to like it because it drowns out the metal scraping/ringing sound hahaha Its the lesser of the two evils for me
  9. One more thing...so it seems like it's not the wastegate rattle of the mark 6? You say this is a seperate issue all together? That would explain why there is no fix available. I have also read on the S3 forums that Audi is not planning to make any modifications to their design to illiminate the noise.
  10. How many km did your friend have when he rejected the vehicle? Im not sure I want to take such a drastic step with mine, but I have to admit the sound is pretty annoying, especially since my last car had the sweet sounding V8 of the E92 BMW M3. I have noticed that once the engine gets to its optimal operating temperature the sound almost disappears completely.
  11. I wish the front end of the 7R was a bit more aggresive, like the gti anniversary edition or the R400
  12. What did the Dealer say about the metallic ringing sound ?
  13. Noticed mine metallic ting-a-ling at around 500km. Don't enjoy the sound. Hopefully I will learn to ignore it but at the moment it's really pissing me off. Will mention at the 1000km inspection but don't expect anything good from the dealer. I will try and test drive a demo golf r when I get some free time, just to put my mind at ease , to make sure its making the same noise. Plenty of complaints about this on the Audi forums. No solution for them either. This was posted by one of the Audi S3 owners: Hello I've had this problem since buying my Audi S3 Saloon S-Tronic this year. It's a brand new car with about 2000 miles. The rasping / rattling turbo waste gate has been acknowledged by 2 Audi centres and I've also had 2 Audi technicians sit in the car with me and comment on the noise. I've complained no end to Audi, and basically they don't give a s**t that this is annoying customers. This is part of a message they sent to me after about 3 letters of compliant: "Having discussed the technical bulletin with our Technical Support Team, I can confirm that the waste-gate flap and rods on the turbo charger start to vibrate due to exhaust gas pulsations. These vibrations cause the noises. The function of the boost pressure control is not affected. The vibration related noise is normal and operational. It is within the tolerance and not detrimental to the vehicle’s performance. Our Technical Support Team has confirmed that currently there is no plan for any production change regarding this. I can confirm that neither of the Audi Centres has found any fault or manufacturing defect on your vehicle. They have concluded that your vehicle is working as normal. Hence, no further investigation is required on this matter." An absolutely appalling response from Audi customer service to another dissatisfied Audi customer. This rattling problem exists and is causing distress and displeasure to those who have the issue, therefore Audi should spend a penny and design a simple fix for it! Not happy. Will be progressing my claim further.
  14. I cant replicate the noise in neutral. Only while driving. I did find something on another forum about fuel lines under passanger side rattling which was easily fixed with cable ties. Im hoping this might be the same issue with the R.
×
×
  • Create New...