5552north
Junior Members-
Posts
25 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by 5552north
-
Bank holiday detail, clayed, polished and waxed, the full works, - just in time for the rain due tomorrow, worthwhile though.
-
I went from a Mk7 GTI to a M135i, selling it after a year as I just couldn't settle with it (ordering a Mk7 R as its replacement). Both GTI and BMW had standard stereos and I found the stereo on the BMW to be terrible in comparison to the GTI, that struck me the very minute I picked it up from the dealership. I specced my new R with metallic paint, pretorias and Dynaudio (as well as black mirrors and car-net, but they were just pennies in comparison to the other options). The Dynaudio is heads and shoulders above what you will have on your M135i (assuming it is the standard stereo) and worth every penny for me. The ride comfort on 19's is comparable, if not better, to that of the M135 on its 18's, and I have standard springs. 90% tints can make the car look a bit OTT for me, but paint choice can make a big difference to how it looks. I very rarely use the sat nav, certainly not enough to consider paying the cost of the upgraded unit (far better put that money into any other options you're considering). For me though, if I was only allowed to choose one optional extra on a new build, it would be Dynaudio.
-
Grateful for any advice, my Karcher K2 has the following C-clip retainer, which makes removing the hose after washing a bit of a pain. I would like to make the process a bit easier; Does anyone know if I could make use of this adapter, screwing the quick release fitting onto the brass fitting once it is seated and secured by the C clip? Are the two threads of the adapter compatible with each other, or both the same size? Are there any methods that allow the QR fitting on the left to be added to the K2 if this adapter doesn't work? Thanks in advance.
-
I am looking to purchase a replacement hose for my K2 pressure washer, and as usual, what starts off as a simple perusal of the various options, turns into a what could be a more expensive purchase! I've gone from considering the basic 10m extension from Directhoses for £17, to their upgraded hose at £29 and then noticed that they have a complete replacement hose and trigger for £50. What looks good about the trigger is that it's fitted with a swivel, which would hopefully negate some of the twisting of the hose I have currently, and make the whole process a bit easier. Does anyone have any experience of this replacement trigger arrangement? Any feedback gratefully received. https://www.directhoses.net/collections/hoses/products/copy-of-karcher-style-k-series-replacment-hose-and-trigger-quick-fit-machine-connection-1
-
Thank you, much appreciated. Today, I tried the Magifoam over the VP PH Neutral that I have 5L of, and found it to be slightly better, I'm considering putting a bit of BH Surfex in with it, to see if it gives it any extra bite. When it does all eventually run out however, I'll definitely look to replace it with some sort of citrus pre wash, i've used Gtechniq W5 in the past and it breezed through caked on flies etc, so may try something from their range when the time comes.
-
As it was such a fine day, I managed a long overdue winter prep; Wheels - VP Bilberry Snow foamed - AB Magifoam PW rinse 2 BM wash - Meguiars Gold Class PW rinse Ferrous decontamination - VP Dragon's Breath PW rinse Clayed - BH Auto clay 2nd wash and rinse Dried Wheels sealed - Gtechniq C2v3 Paint polished - AF Tripple Waxed - FinishKare 1000P paste wax Final dressing - Meguiars X-Press spray wax Tyres dressed - Gtechniq T1 Exhaust - Peek metal polish and coat of wax Still not overly convinced by the snow foam, seems to just sit on top of the dirt, rather than lift any of it away from the paint, perhaps I had my hopes set to high when I bought a lance a couple of months back, I'll persevere anyway seeing as I have about 5 litres of the stuff to get through! First time using a clay bar, reassuringly easy and didn't take long to do. Impressed with the FinishKare, I bought a sample pot a while back but have tended to use Collinite waxes and latterly 476S, but I found that a pain to buff off at times, the FinishKare was a breeze in comparison and will definitely use again. Was a pleasurable 3.5 hours and the time spent should hopefully see it through the worst of the winter. The light wasn't the best by the time I had finished, but hopefully the photos show the final result reasonably well.
-
Yeah, hopefully from now on, it should be a lot more satisfactory and as an additional benefit, the double glazing comes up a treat at the same time!
-
Thank you, yeah, still some tinkering to be done but so far so good with the dedicated lance - the two photographs published in a different order to my post, so the first photograph is the Autobrite, and Karcher second, I can't seem to edit my post, but I'm sure people could work that one out! 👍
-
Cutting the tube of the Karcher attachment to 45 degrees didn't work too well for me, so I took the plunge and I bought an Autobrite lance. Weather finally faired up enough to be able to use it for the first time today and the difference is like night and day. So much so, that it used hardly any of the snow foam mix so not sure if that is normal or not, but I'd say it barely used 100ml from the litre bottle, whereas the Karcher would tend to use the whole bottle. I still have a few washes to get the set up right, but for those that are interested, the first photo shows the best I could achieve using the Karcher attachment, and the other is my first attempt with the Autobrite lance.
-
Thanks all, I'll look into the options further, as thought, its the snow foam lance that requires an upgrade 👍
-
Following a recent purchase of a K2 Karcher pressure washer, which included a snow foam attachment, I've had some disappointing results so far. I'm using Valet Pro snow foam and regardless of the mixing ratios used, the foam is never anything other than runny, and has very little cling. I probably know the answer already, but is there anything that can be done to make the snow foam thicker in consistency, or would a dedicated snow foam lance make all the difference?
-
Thank you, I'm really pleased with it, the silver and black seem to work really well together on the R, more so with the Pretoria's.
-
Very happy thank you, its the car I should have bought the last time around but didn't! It took a while to arrive, but worth the wait for sure.
-
Sent from my iPhone using Tapatalk
-
Thank you, hopefully I've cracked it and posted a photo! Sent from my iPhone using Tapatalk
-
Apologies, tried to copy of photograph in of my new car, didn't seem to work.
-
-
Thanks all, after giving it some thought I've decided to wait for march, which isn't far away in the grand scheme of things. I think the new road tax start in April so shouldn't be affected by that. Be be nice getting back into a Golf again though.
-
Whilst I hope not to change after a year, £1500 seems like a huge difference in value, any figures after year 2 and 3?
-
Yeah, just did a quick comparison of some trade in values on Autotrader for a 64/2015 and a 15/2015 car, the difference is a couple of hundred pounds or so, hopefully if I keep this car for three years then the difference between a 66 and a 17 will less again. Think I'll probably just collect next week, if it'd been delivered on time then I wouldn't even have to consider this, so probably makes no difference overall.
-
Me too, longest I've kept a car recently is 2 years, if you don't think about the money spent, then its like it hasn't happened...
-
Thanks all, I do tend to change my cars quite often, so throwing away good money after bad is nothing new to me! The dealership will keep it until march but like you say, might be as well just getting it now and enjoying it. I hope to keep it for at least a couple of years so in that time, the overall values won't be too far apart I guess, and with the FL coming out and ready to order, values will take a tumble anyway.
-
After a long wait, (and 3 months overdue), my R is ready for collection, question I have, is it worth waiting for a 17 plate on 1 March or should I just collect next week? Does anyone have an idea of the difference in value it would make being registered in February on 66 plate compared to March on a 17 plate? Thanks
-
Hello all. New to the forum but been a Golf fan for many years, ordered an R in August this year and was given an 8-12 week turnaround but had a couple of updates since then to say that its build week had slid to week 49 and now to week 50, can't imagine I'll be seeing it anytime before February now. Does anyone know if I was to cancel, whether I would get my £250 deposit back? Thanks.
-
Ditto. Ordered my R mid August and was quoted an 8-12 week delivery time, my tracker has been at stage 2 for 10 weeks now, queried with the dealership and it now has a provisional build slot of week 49, so a little while longer to wait!