Gibbo205
Members-
Posts
88 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by Gibbo205
-
Changing rear pads, which pads and how to do?
Gibbo205 replied to Gibbo205's topic in VW Golf R MK7 Chat
I purchased the car at a reduced price as the brakes were knackered when I got the car, fronts heavily warn and warped as they are the original disc from new, car has now done 38,000 miles. -
Changing rear pads, which pads and how to do?
Gibbo205 replied to Gibbo205's topic in VW Golf R MK7 Chat
I just ordered VW OEM, disc and pads all round. -
Changing rear pads, which pads and how to do?
Gibbo205 replied to Gibbo205's topic in VW Golf R MK7 Chat
Anyone? -
Hi there I need some new rear pads for my MK7 Golf R and might as well grab disc too I found these: http://www.vwmotorparts.com/brakes-c-37_93_135/genuine-vw-golf-mk7-rear-brake-discs-and-pads-kit-20tsi-p-363.html Seems not bad for genuine parts. Fitting wise I found this video: Does this method work and is safe? I don't have the software or vagcom, hence a manual old school way is required. Thank you.
-
After you Staged 2 my car today, I am blown away, loving it man, its so fast, but silky smooth and so much better to drive. Big thanks buddy!
-
Cheers the downpipe has had hardly any effect on the noise, maybe a little more growl but its minor which is what I wanted as car to look at and listen too looks totally stock.
-
Custom mapping (dyno) done on the Golf by Unicorn Motor Developments in Stockport. Car was running an email style map (Celtic tuning stage 1) when I got it and with the scorpion catted downpipe, TT inlet hose the car made a baseline run of 340HP / 390lb I asked Rick for following from the car: - Remove deadspot from the go pedal - More aggressive throttle mapping in all modes - NO pops and bangs - ECO mode to be running stock VW map with stock boost, just modified for the hardware changes which don't really effect running, ideal for motorway cruises as it will return around 40mpg - Race mode to be all out - Make the torque curve flatter, so the car does not feel as flat up top. The results as above, just from the custom mapping, a good 30-40HP gain after 5000rpm and gains beginning from 3500rpm. Too drive its an improvement for sure, its smoother and now the car is enjoyable to rev out, before it felt a little too manic around 3000rpm, which meant the car felt really flat beyond 4000rpm and doing a kickdown at say 70mph the car picked up but was a little flat. Now doing a kick down and it feels absolutely bonkers and just flies off down the road, the power in the top-end is night and day improvement. Also the MPG now seems greatly improved when driving it hard which is also a bonus. Below is a quick LC run, launch control is now so easy and feels so gentle on the car. I also noticed my front wheels spinning at Pod on Sunday, was told to check the Haldex filter (none service item) and it was as expected gunked up, so all cleaned and now as you can see in below video the car just hooks up with just a chirp of the wheels and no bogging. I ran a 12.2@116mph without LC at the Pod before this custom mapping. Rick the tuner, who runs a stage 1 on his car which made 359/360 on same dyno said his runs 11.7@118mph with LC at Pod. He says a none LC run should now net me around an 11.9@120mph and an LC run will be around 11.5s in the quarter mile and around 120mph terminal. It feels silly quick and I've never owned a car that was so fast for so little horsepower, its uncanny how quick this thing is. One very happy customer, such a shame the Pod has closed now until next year, was hoping to bag some 11's
-
Had the Unicorn DSG / TCU Map done today
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
Took the car to Pod today, crazy busy and crashes, so only got two runs First run, LC enabled, traction fully off, Gearbox S auto, held it on LC for 3s and it spun and bogged, 2.45s 60ft, 12.8@116mph: Second run I did not use LC, instead just did a street style launch, so car in manual mode, no LC, just take foot from brake and press pedal to floor and using gearbox in manual mode with 6500rpm gear changes got a much better 12.2@116.46mph, if the LC had hooked would of being a high 11, but as in 5hr I only got two runs and it was 3pm, was time to call it a day and go home. So 116mph with a generic stage 1 map, cannot wait to get the downpipe fitted and have Rick work his magic with a Stage 2 custom unicorn map should hopefully put me over 120mph in the terminals. Quite happy with the terminals, proves the stock air box is more than good enough on these cars. -
Had the Unicorn DSG / TCU Map done today
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
Hopefully after next week it will go something like this: As both our cars are running identical modifications, or lack of modifications. -
Hi there I messaged Rick last night on Facebook as I am booked in next week (Thursday November 2nd) for a stage 2 map & DSG TCU map, but I've witnessed what seemed to be clutch slip, in short: - LC seems to slip, 4000rpm launch, car revs jump as release brake, goes into 2nd, then back into 1st and then into 2nd, still quick but clearly not ideal - Revs seem to jump around 100rpm in all gears, but can only really notice it in 4th onwards as peak torque hits around 3200-3500rpm, hard to tell if clutch slip or a boost spike. I said to Rick I am worried its the clutch and as I am going Santa Pod this Sunday (RWYB) I did not want to be using an LC that is not ideal or if clutch is slipping, he said no problem the TCU map takes less than 30 minutes so pop it down and I will load it on the car for you. So I arrived as agreed, he flashed the car and all was well, he explained what I might be witnessing is a boost spike due to the off the shelf map I am running which is designed for a stock car and the fact I have modified stock air box, panel filter and have an TT inlet pipe the torque will be higher than the map expects and/or a boost spike could be happening instead of having a nice flat torque curve. Also whilst I was there he was mapping another guys lapiz blue Golf R, it went from 296HP upto 359HP and torque from 306lb/ft upto 370lb/ft and it was a beautiful flat torque curve with no spikes or dips, perfection. Anyway so the drive home I was able to witness the following improvements / changes from the Unicorn TCU map: - D mode does not change up as early, its now better, does not lug the engine as much. - S mode changes up sooner, makes it more suitable, the downshift blips seem a little more aggressive too, its smoother - Manual, car shifts quicker for sure! - LC: Yes my problem has gone away, check my video, the car now launches better, also the LC is reduced to 3500rpm so less stress on transmission and it seems to change up earlier, again less stress and is definetely quicker. - ECO Mode: Happy to stay in neutral when braking gently, whereas before it was using engine braking even with light press of brake, annoying. - In traffic, D will now stay in 2nd gear even at crawling speeds, making moving along in slow more pleasurable, stock it was two keen to shift to 1st - Car seems more responsive moving from a standstill, also hard to tell but car feels more savage in 1st, maybe a torque limiter is removed/reduced? Don't think I missed anything, here is a video of a launch I did earlier: Really happy with that, well under 4s. Next week I get my Scorpion catted downpipe fitted, then off to Unicorn for the Stage 2 custom mapping, hoping then it will be close to 3s mark to 60. But big thumbs up to Rick and his staff at Unicorn, great bunch, very friendly and well his TCU tune speakers for itself and the car drives much better, worth every penny, cannot wait to feel how the car drives after he has worked his magic and its got a whole bunch more ponies under the bonnet.
-
Intercooler (FMIC) or Catted down pipe
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
Tried launch control tonight for first time, pretty impressive but I definetely think my clutch is maybe slipping or this celtic remap on the car is a bit poo. It launched kind of like this video: I did it twice once with traction partially off, second time with it fully off, same both times, felt very quick though. Just seemed odd that it jumped back to first as if 2nd was a false trigger, did not really seem to cause delay and I don't really recall much if any wheel spin, maybe just a touch of slip, road was dry. PS4 tyres! Also in 4th and higher if I floor it at 3000rpm the revs will jump around 100rpm as it accelerates through 3500rpm where peak torque hits. The car is around 375lb/ft and DSG is on fresh oil, 37k miles. Am hoping Ricks TCU tune will sort it as I suspect LC should not be as per that video from 20s? -
Best bang for buck tuning Golf R DSG
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
Just ordered a roll of this, should be enough for a downpipe: http://www.ebay.co.uk/itm/301713780460 -
Best bang for buck tuning Golf R DSG
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
Sounds like a good idea to me, got a link to where I can buy some wrap from please and whatever else is needed? Gotta be worth at least a couple of horses! -
Intercooler (FMIC) or Catted down pipe
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
Will do, hoping its not too much louder, probably be hard to give thoughts on power as my schedule is this: - Currently Stage 1 Celtic ECU map with TT inlet and modified stock air box - Fitting this downpipe, no map alterations so taking it easy - Then Unicorn Stage 2 map & TCU map As such I think any increase and improve drive ability is more likely to come from Unicorns custom mapping and TCU map over the off the shelf Celtic map. But of course I can comment on sound etc which I shall. -
Intercooler (FMIC) or Catted down pipe
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
Just ordered me a scorpion downpipe with 200 cel cat from awesome GTI to bolt upto stock backbox, cost £540 shipped, pretty good deal I think. I went with Scorpion as they locate the catalyst a bit further down stream, so in theory turbo will spool faster and less heat in the engine bay. -
Best bang for buck tuning Golf R DSG
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
Just ordered me a scorpion downpipe with 200 cel cat from awesome GTI to bolt upto stock backbox, cost £540 shipped, pretty good deal I think. I went with Scorpion as they locate the catalyst a bit further down stream, so in theory turbo will spool faster and less heat in the engine bay. -
Intercooler (FMIC) or Catted down pipe
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
Oh those with catted downpipes, do they add any drone or more cabin noise? -
Intercooler (FMIC) or Catted down pipe
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
Thank you. Would this be the correct downpipe to buy to fit the stock exhaust system: http://www.ebay.co.uk/itm/Milltek-Golf-R-MK7-Audi-S3-8v-RACE-Sports-Cat-Downpipe-SSXVW386-3-Fits-O-E/332402358751?fits=Model%3AGolf|Plat_Gen%3AMK+VII&hash=item4d64b979df:g:-gYAAOSwfVpYrvP3 ? Just bolt it up and then stage 2 tune it, job done? Should be around 380HP then? -
Intercooler (FMIC) or Catted down pipe
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
What is a TIP mentioned on those graphs? Is that the TT inlet hose/elbow I already have? -
Intercooler (FMIC) or Catted down pipe
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
Won't be tracking the car, as good as it is, this is no track car, brakes aint up too it and the whole AWD things is a bit un-involving, am sure it would be quick, just not my cup of tea. As a road car its bloody amazing! Got a fully stripped, caged, motorsport diff E46 M3 for track and weekend fun. Shall ask Rick what he suggest, maybe he has such options in stock, might end up spanking the bank account whilst I am there. 400/400 would be nice if reliable and legal (emissions). -
Intercooler (FMIC) or Catted down pipe
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
If I make say 360HP / 380lb/ft stage 1 with modded stock air box, panel filter and tt inlet pipe. What would I be making stage 2 with only hardware change the catted downpipe? 10HP more? 20HP more? Still pass MOT? -
Intercooler (FMIC) or Catted down pipe
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
What gains would the catted downpipe and stage 2 map be over my stage 1? -
Hi there Am toying with the idea of adding an Intercooler (FMIC) or catted downpipe to the car. Car is currently: - Stock air box, air ducting opened up with panel filter - TT inlet pipe - Next week goes in for Unicorn stage 1 ECU and TCU maps I believe with the above the car will be around 360HP / 380lb/ft If I was to add an intercooler or downpipe what could I expect the new power figures to be? I like FMIC's as they don't add any stress to the car or effect the sound or emissions and are good for turbo/engine as keep temps down. Just interested to hear peoples thoughts on which is best as they are both around £750 fitted. Not interested in a de-cat downpipe due to car then failing MOT/emissions.
-
Best bang for buck tuning Golf R DSG
Gibbo205 replied to Gibbo205's topic in Modifying your Golf R MK7
Like I say this is my first Golf R, things I have noticed, maybe issues or maybe just normal: - Stand still in D or manual (not tried S), stomp it hard its like it thinks for a split second and then it goes, almost like its preparing for the insane acceleration about to happen. - Ease into throttle and its instant, since service, probably more effective to ease into then floor it, though just smashing the loud pedal from a stop is great fun. Still not tried LC yet! I also think my DSG could have marginal slip, if I floor it in 6th at 2500rpm, around 3000rpm the RPM jumps like 100rpm for a split second, its hardly detectable. Seems I am noticing it now since I modified the stock air box to flow more cold air, panel filter and the TT inlet pipe, so maybe the car is pushing quite a bit more torque and its enough to cause minimal slip, though showing it to a passenger and they could not detect it, but I do find I am very sensitive to stuff like NVH etc. In 3rd and 4th I think it maybe does it, but I can't really detect it, maybe a 50-100rpm millisecond jump and accelerating hard through gears or activating kick down and seems no problem. Rick has it next Tuesday for remap on both ECU and TCU so he can check it and confirm for me if its slipping, if it is the TCU map will probably fix it as I'd take a guess that the car is hovering around 380lb/ft area at the moment so a lot more than the DSG is expecting or it could just be normal operation. If anyone wants to test, 6th gear, foot to floor at 2500rpm and let the revs build to around 3000rpm and see if the RPM jumps at any point around 3000rpm by say 100rpm or so for an instant, less than a second, seems to be when peak torque hits if I was to take a guess and it so marginal there is no impact on the cars acceleration, it just flings itself down the road, amazed how it will go from 80-110 in 6th so quick.