Jump to content

Zer0

New Members
  • Posts

    6
  • Joined

  • Last visited

Everything posted by Zer0

  1. You can limit boost by gear, don't know if that would help with LC. I have the full MST intake kit which includes a larger turbo inlet and silicon hose and of course air filter, other than that I am stock: https://mst-performance.co.uk/product/air-filter-induction-kit-with-intake-hose-oversize-turbo-inlet-elbow/ Here are my map 6 settings, they're a bit more conservative than map 4 even but as the car is new I don't mind being extra careful. 1500: 0 2000: 2 2500: 3 3000: 3 3500: 3.5 4000: 4.5 4500: 5.5 5000: 5.5 5500: 5.5 6000: 5 6500: 4 7000: 3 I think the 2019 ECU might be a bit different so it's not happy with higher boost in my case, or it is the fuel (ron 98). As you can see it is tapered off quite a bit. Can't check right now but map 3/4 runs higher boost so that might be quicker. I have a new Seat Leon Cupra 300 4drive DSG7 which has the same engine as the MK7.5 R. Using the map above I ran 0-60 mph in 4.09s with LC on my first try, haven't tested since. 100-200 km/h 11.05 s. Winter tyres but before I got the intake. Both times measured with Dragy. @george@BMS would know more.
  2. No changes in maps but there is a beta firmware you might want to try, supposed to improve some stuff: https://www.n54tech.com/forums/showpost.php?p=656031&postcount=625 Installed it the other day. I’m using a Custom map 6 George helped me setup after a few days of testing, 2019 DSG7 as well. Runs really great. Best if you can log some runs and setup a custom map for your car and fuel. Map 3 and 4 are similar but map 4 tapers down the boost a lot past 6k which is why you feel it lacks up top. From what I understand it is mostly for DSG7 and using LC where that map prevents good launches. If you don’t use LC switch over to 3 and it should be quicker up top. Then run some logs to be safe and then mail those to George and you can work together
  3. Alright thanks. Put my name on that list and I'll grab both when you have them ready
  4. Hi Rob. Any of these still available? Looking for a plug D extension plus an AFR wire tap plug for post WLTP but I can’t see the classifieds, I suppose it is because I’m a new member.
×
×
  • Create New...