I've been trying to get this to work on a pre-facelift (2016) R. Still a no go... I'm in Canada, speed signs are in black and white.
I followed the instructions down to a T, but I'm still getting "No road signs available" in my dash. Am I missing anything??
Module: 5F (Information electronics)
Adaptation → Channel: Car Function List BAP Gen2 - traffic sign recognition 0x21 → active
Adaptation → Channel: Car Function List BAP Gen2 - traffic sign recognition 0x21 msg bus → Databus extended
Adaptation → Channel: Car Function Adaptations Gen2 - menu display road sign identification → active
Adaptation → Channel: Car Function Adaptations Gen2 - menu display road sign identification over threshold high → active
Coding → Long Coding → Byte: 24 → Bit: 6 → active (was already on)
Module: A5 (Front Sensors Driver Assistance System)
Security Access → Code: 20103
Coding → Long Coding → Byte: 01 → Bit: 0 → active
Adaptation → Channel: Road Sign Detection Fusion Mode → Road sign detection
Adaptation → Channel: Display end of speed limit symbol → active
Adaptation → Channel: Valid additional characters (display valid additional signs) → 00100111 (was already 100111)
Adaptation → Channel: Display No passing allowed" -> active
Adaptation → Channel: Function Module Road Sign Recognition -> On
Module: 17 (Instruments Cluster)
Coding → Long Coding → Byte: 05 → Bit: 2 → active
Reboot infotainment unit by pressing and holding volume knob for 10 seconds.