Hicksyyyy Posted July 5, 2018 Report Share Posted July 5, 2018 installed my dashcam into the car the other day. the charger light is showing as on but when I'm driving the dashcam keeps turning itself on and off constantly when the car is on. I would say it dies this about 10 times a minute. it worked on day one but hasn't for the rest of the week. I had to change the charger for a longer one so I wonder if the power on that charger isn't long enough. I have ordered a nextbase longer cable to test but wanted to know if anyone else has come across this problem. or problems with the power coming out the 12v socket . thanks Andy Sent from my SM-G935F using Tapatalk Quote Link to comment Share on other sites More sharing options...
mark118 Posted July 5, 2018 Report Share Posted July 5, 2018 You could try the socket in the boot temporarily to see if the same thing happens then you know if you need to start checking your bits or if its the car, I have 2 dashcam and a WiFi dongle on my rear 12v and all good so far. I think they are rated to 10amps each 12v socket Quote Link to comment Share on other sites More sharing options...
Rex2017 Posted July 5, 2018 Report Share Posted July 5, 2018 If you've got a nextbase, just spend the 15 quid or so and get the hardwire kit. Very easy to fit and no hassle with dangling wires then. Can also have it permanently connected to record parking accidents. Quote Link to comment Share on other sites More sharing options...
Hicksyyyy Posted July 5, 2018 Author Report Share Posted July 5, 2018 thanks all. I've got the wires hidden well but will have a look into the hardware kit Sent from my SM-G935F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Rich_D Posted July 5, 2018 Report Share Posted July 5, 2018 I used the hardwire kit, it's been faultless for the past 2.5 years and is a nice discreet install Quote Link to comment Share on other sites More sharing options...
Hicksyyyy Posted July 5, 2018 Author Report Share Posted July 5, 2018 I used the hardwire kit, it's been faultless for the past 2.5 years and is a nice discreet installdoes using the hardware kit mean you are restricted to using that specific dashcam or can you say upgrade the camera but keep the existing kit ? Sent from my SM-G935F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Rich_D Posted July 5, 2018 Report Share Posted July 5, 2018 It's suitable for any camera that uses a mini USB for power, mine is a Transcend dashcam with a Nextbase hardwire kit, most use that power connection that I've seen, like so... Quote Link to comment Share on other sites More sharing options...
GeoS Posted July 5, 2018 Report Share Posted July 5, 2018 The new charger might not have enough oomph for the dash cam. Check the mA output rating to see if it is enough.Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Hicksyyyy Posted July 5, 2018 Author Report Share Posted July 5, 2018 new longer original cable arrived today and fitted. all back to working order now with no cables visible . must of been a weaker power output.thanks for your input all!cheersSent from my SM-G935F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Golf67 Posted July 5, 2018 Report Share Posted July 5, 2018 6 hours ago, Rex2017 said: If you've got a nextbase, just spend the 15 quid or so and get the hardwire kit. Very easy to fit and no hassle with dangling wires then. Can also have it permanently connected to record parking accidents. Where did you get the chassis 0V connection? I had no trouble locating and piggy-backing the fuse but couldn’t find any return path for the 0V connection. The nearest screws around the fuse box aren’t grounded to the chassis. Quote Link to comment Share on other sites More sharing options...
Rex2017 Posted July 5, 2018 Report Share Posted July 5, 2018 https://www.autoinstruct.com.au/manufacturer/volkswagen/mk7-golf/mk7-golf-dash-cam-install/ Step 17 shows the little bolt. Step 18 picture helps to orientate you as to where that bolt is. Golf67 1 Quote Link to comment Share on other sites More sharing options...
Golf67 Posted July 5, 2018 Report Share Posted July 5, 2018 12 minutes ago, Rex2017 said: https://www.autoinstruct.com.au/manufacturer/volkswagen/mk7-golf/mk7-golf-dash-cam-install/ Step 17 shows the little bolt. Step 18 picture helps to orientate you as to where that bolt is. Thank you! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.