-
Posts
23 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by GeoS
-
I have been running front and rear DS2500. No issues with ACC.
-
Greater negative camber is usually the goal for a track / performance setup. True, it is out of OEM spec. If I recall correctly, the camber should be adjustable via the subframe. This can only even out the left to right difference but cannot create more / less camber overall.
-
-
Is the passenger mirror selected when engaging reverse? The dip won’t work in any other position.
-
Sounds like the toe is off in the front. This is adjustable.
-
That looks like the correct one. Your version is for the mk7 GTI and a bunch of other VAG cars.
-
It looks like you have the wrong version. The part number you need is T9359. It orients the solenoid 90 degrees to avoid the space issue you are describing. https://www.gfb.com.au/products/blow-off-and-diverter-valves/dv-plus/dv-t9359-suits-vw-mk7-golf-r-and-audi-8v-s3-detail
-
Yup. I have 3 out of 5 on there. Looks OEM-ish.
-
Each sticker has a part number on it. You can order from a dealer or e-acca. Most of them are reasonably priced. There are two that are "special" relating to emissions and cost an arm and a leg. These you can only get them from a dealer as they often want your VIN number. This is for a Canadian vehicle.
-
I'm stage 2 ECU/TCU. Recently added the pedalbox+. No issues like you describe. Much better throttle response now though. The stage 2 alone had more power as expected but the pedal responsiveness was still not very sporty.
-
The car is actually pretty good in stock form at the track. Yes, you can upgrade all the various bits and make it better. It is a slippery slope. However, it doesn't take much to make it fun and reliable. Agree, the brakes are one of the first things to look at. In addition to stuff already mentioned you should look at the RS3 front ducts. Cheap, easy instal and helps keep the temps down. More front camber (e.g. camber plates) will help prolong tire life and improve front grip. The ESP is not very intrusive and is a good safety net. I just leave it on. Might be more of an issue on tighter courses and powering out of corners. The driver aids can get a bit confused. I've had the pre-collision activate while following another car into a braking zone. However, I usually forget to turn them off for each session.
-
I've been looking into this as well for a stage 2 setup. Will go with the NGK RS7 plugs. Based on various posters there were some failures relating to Beru branded RS7 plugs. Possibly a bad batch as not everyone has had issue with them either. NGK seems to be the trend on the forums. Here are the OEM part numbers: 06K 905 601M - (NGK) 079 905 626M - (Beru) Sent from my iPad using Tapatalk
-
The new charger might not have enough oomph for the dash cam. Check the mA output rating to see if it is enough. Sent from my iPad using Tapatalk
-
I have the VBOX but don't really know much about draggy. It is pricy but works very well. There are iPhone apps (not sure about android). The main reason I got it at the time was for the 20Hz GPS (compared to the 1Hz in the iPhone). I use it with the Harry's Laptimer app on track days and the data resolution is really good. Supports an external GPS antenna so you can mount the unit anywhere. I guess it depends on how you want to use it.
-
Thanks. I don't want to spread incorrect info. I'm just starting to figure out what to replace my rotors/pads with. How are the front CS pads for noise?
-
I though the rear rotors were the same but the pad compound was different. This is the part number from another thread apparently for the rear CS pads... 5G0698451.
-
If it is the half-shaft making contact with something then there should be circumferential marks on it from rotation. I can't really see any in the above pic (maybe just not visible there). Otherwise the contact is likely happening somewhere else.
-
Odd given it is a German car and they work in metric over there. Maybe ROW accommodate the full 6 liters? Sent from my iPad using Tapatalk
-
Just go straight to the V12 version feel... https://youtu.be/1RZwwYXNzgM Since the sound is simulated why couldn't VW give us the option to choose the engine type? It would be fun to chose right from the screen. How hard could it be to hack the soundaktor file anyways... hmmm...
-
I've searched but have not found anything on this. I would like to decrease the volume or disable the chime for the outside temperature warning. Don't mind the visual snowflake alert. The chime normally startles me and can go off several times on the same drive as the temperature hovers around the trigger point. Very annoying. All I have found is that it is a safety feature and cannot be disabled. This despite being able to disable the seat belt chime and alter a number of systems / features that are safety related. I don't even want to totally disable it: maybe a lower volume or only 1 ping per trip?
-
The NA cars will apparently only have direct injection not the dual system (direct and multiport) found in Europe. I suspect this would have an impact on the tuning... and carbon build-up.