Statller-Stevo
Gold Partners-
Posts
169 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by Statller-Stevo
-
First Santa pod experience ! Rwyb, fast show.
Statller-Stevo replied to Frazercraig's topic in VW Golf R MK6 Chat
Lol Prob give one a hard time bud My old mans X5 4.0D certainly romps on Yours tweaked yet ? -
Yes, this is the new Statller PD PCV blank. It will be offered as part of a kit when available - very soon. eliminates the need for a catch-can, PCV delete etc and no more nasty oil vapour going back into the engine and clogging up those valves. Form an orderly queue here!
-
That was taken before it was all back together. You want to see what it is like now the colour coded intake is on!
-
Hi Joff, These R's really come alive with a map and a few choice bolt-ons.
-
Joff Stage 2+ are around 3.9 - 4.0 0-60 on correctly calibrated Racelogic boxes depends really how much they spin off the line you can't really use anything else for accurate figures. Weve got 2 cars in this week for upgrading to the newer 2+ files so Jump in ya car and drive the 2 miles downt road and we'll hook a box up & see Real world Compared 'STOCK' 0-60mph factory cars would be: GEN 2 997 C2/C4 PDK 3.8 360 Ferrari 996tt R8 V8 & early V10's RS6 V10 New RS4 RS3 TTRS etc etc
-
Statller Power 'Project Devastator'
Statller-Stevo replied to Statller-Stevo's topic in 6R Members Rides
I can't tell you how long stock pistons will last with other tuner calibrations bud, but hand on heart we've never broken a piston yet on any GIAC stage 3 cars saying that I have had other tuner 340hp 2+ cars in the shop that have taken a piston out on a CDL lump I can show you the pistons I still have them. head porting wise yes definite gains but we do other things first. I ran 32lbs of boost all Weekend (stock CDL 30k mile pistons with Arrow rods) using the race file with 100 Oct and the only thing that suffered were the clutches we're making well over 500ftlb (my dyno) with race gas (still got 450ftlb @ 7400rpm too, it's nasty lol ) Ill post some acceleration Vids up soon -
Statller Power 'Project Devastator'
Statller-Stevo replied to Statller-Stevo's topic in 6R Members Rides
Hi mate, We have cams and a different calibration now, the knock detection is not dampened too much so this is how we can run this much power on stock Pistons. Tony the Cars fast mate I cannot emphasise that enough, we can't turn it up fully as the Clutches won't hold the torque once again, it will go higher than the figure posted hear by quite a bit so Dodson are sending me a stage 2 custom kit to test although I really think it’s a low 10 second car as is Behind the seen’s were running less than 2.7 0-60mph on 100 Octane with just the back bench out and a pair of front sports seats on road tyres It basically explodes off the line (Ask John) Every morning I come to work telling everyone how much I love this car, I know they’re getting bored of hearing it now but I just cannot bring myself to sell it this year like planned Remember I take my 5 year old to school in it every day, it's never turned down just runs like this 24-7 I’ll be honest I think it would eat my 775hp 997tt for breakfast it rips nearly 1 second out of it to 0-60 as is Dragstrip well…. we tried last Sunday but never got even 1 run due to rain, I’m pretty confident I only need one run at it now (road tyres too) Cheers buddy -
Awesome mate looks sweeeeeeeeet! Have to start bulling mine up soon
-
Changing seats to Recaros and sorting the airbag light...
Statller-Stevo replied to JPearce95's topic in VW Golf R MK6 Chat
You can turn them off via VCDS or Vag tester you don't need any resistors -
Gaz is on 6 front + 5 Rear buddy
-
Statller Power 'Project Devastator'
Statller-Stevo replied to Statller-Stevo's topic in 6R Members Rides
Not updated the build for a while we are just that busy all the time, anyway here it is: Weve been working on the car quietly in the background for over two months testing parts and future upgrades to our already real world powerful stage 3 kits First off we had to harness the power of our original stage 3 lots of you know we'd always struggled with clutch slip and as you've seen on my build we'd already tried the 7R clutches which were a definite improvement over our previous 6R setup but still didn't hold too well over the 1/4 mile when pushed We decided to contact Dodson Motorsport over in New Zealand (DSG clutch kings) a few phone calls and e-mails later they liked what were about and subsequently Set us up as the official throughout UK dealer for these clutch packs and on testing in our 6R well yes they do the trick..... A pic of the Dodson clutch set: With the help of GIAC we then developed an all new DSG file to make the best of the Race clutch packs this gave us improved smoother shifting though out the whole range of modes and in particular had the drive mode calibration completely re-written to suite the way these large frame turbo cars drive at regular street speeds this became our new default stage 3+ DSG software With the clutches fitted and now gripping we knew we had an even faster UK 1/4 mile car and now a competitive World record attempt 1/4 mile car utilising Road not Race fuel ! but we didn't just stop there.. Using the knowledge we had gained from this car we took the kit a step further expanding and raising the power to a complete different level of stage 3 As released in our dealer section here is a quick run through We have been working quietly and diligently in the background for the last three months testing this stage 3 step up for the EA113 high pressure turbo platform Although still utilising stock pistons and cylinder head basic engine strengthening is a must at this power and torque level Unlike competitor kits this Stage 3+ kit will run in excess of 550hp / 450ftlb of torque utilising normal everyday 93.5 Octane road fuel No methanol injection and or race fuel / octane boosters are required to run this output and no special one off power / pass calibrations are used. Basically what you see here is what you will get This stage 3+ kit is still based on our previous stage 3 GT30 power kit which is fitted to our in house Golf 6 R this car currently holds the UK's 1/4 mile record @ 11.003 / 126 mph however this stage 3+ kit has an extra 78hp / 77 ftlb of punching power including better spool over our previous UK fastest 6R which set that record Hopefully this kit will power The worlds fastest Golf 6R in the coming months GIAC Provide the custom calibration to run this 3+ kit via the factory ME9 ecu As you can see these results are pretty intimidating and using 100% Shell 99 ron Road fuel no methonal injection / Race fuel or additives Under bonnet shot (looks pretty stealth tbh) Engine shot of our stage 3+ kit from an angle you can't see in the car: Obviously we're off to the drag strip testing the kit once more in the next few weeks then the top speed testing will start I'd guess we could possibly have a 200mph 6R on this forum pretty soon Well before the years out definitely Project Lock-down will be starting over on the 7R members rides imminently please keep an eye out We will be able to offer stage 1 stage 2 and stage 2+ for the 7R platform from the offset -
What turbo's in the kit Andrew If it's a 71 or 76
-
Id guess youll be doing a front BBK at some point so If your going down that route do the dimpled or grooved 335 rear conversion looks tons better and helps balance the car under heavy braking We keep the kits in if you want a price
-
All good mate thanks She's coming along very nicely atm hows yours doing apart from you tearing parts off it ?
-
Yes mate same as 8P S3
-
Billet door mech upgrade Daniel son ?
-
Statller Power 'Project Devastator'
Statller-Stevo replied to Statller-Stevo's topic in 6R Members Rides
Some great upgrades coming soon guys. Think 700+Awhp!! -
It's just metal mate everything can be made to fit easy, Revo 3 will work out without problems, lots of tweakery on the dyno to get the best out of them though. If your going to push the power hard you'll need a second intank pump with the Revo file, Revo can have problems with the OEM or RS3 intank under high demand situations all easy sorted though
-
Its a no brainer mate! Stage 3 power set up right is addictive real super car in gear performance ! DP should be the same on all tfsi CTS kits (I've not seen any different ones yet, I can ask Clay if there are any if you want) you'll prob find the turbo intake pipework might not fit as its made for LHD cars we have a solution for that though. Lmk how you go on
-
Removing front number plate housing
Statller-Stevo replied to toosmiles's topic in Modifying your Golf R MK6
Ofcourse, I will post some up tomorrow mate when I'm back in The holder is real easy to get off takes a few seconds,mine had plastic rivets just popped the middle out, some have little self tappers -
Removing front number plate housing
Statller-Stevo replied to toosmiles's topic in Modifying your Golf R MK6
Fitted mine without the holder so I could get max flow to the cooler Looks fine, no plate covers the original holder holes no problem Used 3M sticky pads easily reversed nothing adverse -
My Opinion On DTUK Pedalbox & Tuning Box
Statller-Stevo replied to AdDaMan's topic in Modifying your Golf R MK7
Take it from me the best tuned UK 7R's / S3's will not romp a GTS (just yet !!) drive both day to day stock tuned dyno etc etc Saying that lots of headway to make next year though -
Rick, Just so you know All the flash back to Stock files we use are fully O.E.M. No traces as of yet on any dealer testing so just as with your car mate No flags no problems with our 7R so far With Regards to the Stock file not been 'stock' when running a GIAC or Revo tune well that could never be anything else other than that as you well know the switchable (Just as the RS3 you spoke about) stock is only a 'stock power level map' in that particular aftermarket calibration it should never be sold as a manufacturer stock map I certainly never have All cars that are flashed with us in the first place will be returned to stock whenever needed at no cost, that's how weve always worked tbh
-
Well I ordered one in June, I think so anyway, Can't remember now it's been that long tbh Was promised BW 41 first time round then a confirmed 45 when I tried changing spec I reckon I'll not see it now this year tbh ! Shithouses !