Jump to content

ChrisTurbo

Members
  • Posts

    54
  • Joined

  • Last visited

Everything posted by ChrisTurbo

  1. I’ve had to swap back to the standard setup as it was in for some warranty work. I’m planning on doing a quite a few track days this year if Covid is eases so I need to keep it standard as it will fail the noise checks, it fails Bedford standard! I can attest to the dislike of the ‘pops and bangs’ too.
  2. What’s wrong with with fake noise? I have a GT3 with straight pipes and believe me that’s spine tingling at 9k rpm (and deafening), and I have the R set to 100% because I think it sounds great. (I also have OBDELEVEN and have tried the settings). I don’t get this at all - it should be about how you feel when driving? Please enlighten the me.
  3. They are. They will soon be under Bilstein B16s. Still need to sort centre caps out though which is a pain.
  4. These were ‘domed’ so do not stick to the caps I got with the reps.
  5. I’ve bought 3 kinds of centre caps / stickers for the 18” reps and nothing fits or looks good. I think I need a 60mm cap however I can’t find any in the UK that are VW. Any suggestions Thanks
  6. Guys this is a well known issue with RS3s (I had one). When I switched to Michelin Pilot Sport 4S it caused the TC light to flash most of the time on light throttle. I believe Michelin also released a note to say they were not compatible with the RS3. I just turned off TC when driving spiritedly in the RS3 as a ‘fix’ Haldex type systems are very sensitive to tyre configuration.
  7. My friend helped test them for GY in his Cayman on track. He thought they were better than MPS4S and not far off Cup2 (they went off a bit sooner). I run Cup2 on my GT3 and was going to put them on my R however I’m going SSF1
  8. I’ve acquired front (26mm) and rear (24mm) Whiteline anti roll bars for my Mk7 Golf R which I intend to use on spirited drives and many track days to come. My intentions are to dial out the understeer and make it more neutral so I can rotate when trail braking on turn in. I will have B16 PSS10s and also 034 MS top mounts (2.4 degrees negative camber). What I don’t want is a loose back end that induces snap oversteer. what settings should I set these to? They have 2 per bar front and rear. I’ve been told to setup wisely as I could destroy the balance that could end badly!
  9. I have a set of Supersport F1s being fitted to my new CM Wheels Pretoria 18” reps. I will try the Cadiz centre badges when I fit them... hoping they fit.
  10. What did you go from and to? Thanks
  11. Hi, I am replacing my Cadiz alloys for 18” CM Wheels Pretoria reps. They are direct fit and should not need any spigot rings etc. I have read that the VW centre caps will not fit them and I need 56mm VW stickers. Where can I source these - there are one set of ‘R’ stickers on eBay from China that wont arrive until late Feb. I think I would prefer the VW ones. Thanks.
  12. I have some Bilstien B16 PSS10s being fitted in the new year along with some front and rear White Line ARBs. I think I might need to adjust the camber outside of the current thresholds (think it’s 1-1.5 negative stock?) What do you recommend (tried and tested) and any links? Thanks.
  13. That’s great news..... I found a set on eBay for £1800... I’m not sure on the colour (green on a lapis blue) and also the fitment of the brake lines as they are off a Octavia VRS.
  14. Will the Tarox kit fit under the Cadiz alloys with no spacers - I want to keep the stealthy stock look.
  15. This is a great post and is most helpful. Thanks for taking the time to write this up. I need to research the BBK option as there is so much choice and all around £2k or more so need to be right for me. ~I.e. I like the standard Cadiz alloys but knowledge these would need to go if I BBK. I might follow your advice for now ... 20 min sessions would be fine for me as this is what I’m used to. PS..... funnily enough I had a set of RS3 ducts arriver today! Thanks.
  16. Thanks. So shall I get the uprated clubsport S discs or maybe the Vagbremtechnic 'J' Hooked 340mm Front Brake Discs (MQB) for starters?
  17. Hi, I collect my Dec 2016 registered Golf R. I want to use it for spirited Sunday blasts and a fair few track days next year. It will also do the odd commute when I am not working from home. My day 1 list (as in I want to buy now) is: Brakes - DS2500 pads - RBF600 fluid - Hell Brake lines - Discs are new and OEM (should last me until i BBK in the future) Tyres - Michelin Cup 2 (18/40/225) Suspension - Bilstien B16 PSS10s - 034 Motorsport top mounts????? Are these the correct ones to get to add a bit more negative camber? - Geo The question is where are the best places to get some deals on the above? I was thinking about getting it fitted at Midland VW? I was also looking out for a stage 1 remap/gearbox flash (DSG) Thanks Chris
  18. Golf R Moody Front by Chris McDonald, on Flickr
  19. With the weather being very stormy, overcast and generally shocking we managed to get 30 minutes to clean the cars.... It would have been a shame not to get a few candid shots in. Golf R - Winter Glow by Chris McDonald, on Flickr Golf R - Clarity by Chris McDonald, on Flickr Golf R - Winter Behind Scenes-1 by Chris McDonald, on Flickr Focus The Power by Chris McDonald, on Flickr Rinsing Away by Chris McDonald, on Flickr Creating a Dirty Mist by Chris McDonald, on
  20. My paperwork came from inchscape. Yes I had to wait a month from it landing at the port. I think the transporters randomly pickup stock, not first in first out. I called Inchscape direct who were really helpful to be fair. CVL were more a middle man and provided no benefit compared to dealing direct (although I don't think you are supposed to do that).
  21. It was well beforehand. The hold up was at the port I believe. Nightmare! Oh well at least I get it this week. It has been very painful though.
×
×
  • Create New...