-
Posts
45 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by nwmark
-
Burger Tuning JB4 information thread
nwmark replied to george@BMS's topic in Modifying your Golf R MK7
Many Thanks roberth -
Burger Tuning JB4 information thread
nwmark replied to george@BMS's topic in Modifying your Golf R MK7
I must have missed this somewhere in the thread... Firmware update and the Auto Shift Boost Redux value what are the acceptable values 0-100?? and which is low and which is high? 0 minimum boost reduction, 100 max reduction, is that right??? I used the BT app to update and its carried over my original map 6 settings, so this value is currently 0. Thanks -
Burger Tuning JB4 information thread
nwmark replied to george@BMS's topic in Modifying your Golf R MK7
at least you figured it out. ​I don't leave my data cable in all the time, but I should check my obd cable as it runs down the back behind the heat shield but I know it still get hot. -
Burger Tuning JB4 information thread
nwmark replied to george@BMS's topic in Modifying your Golf R MK7
​Did you sort this out? or was it your data cable that had melted? ​I had the same issue last week, logging was working fine then the next day nothing, not detected in device manager either to check for COM port - after much head scratching, I remembered my laptop (Windows 10) had installed a load of updates the other night, so I re-installed the usb driver from the JB4 install zip and its all working again now. Might be worth a try. -
Burger Tuning JB4 information thread
nwmark replied to george@BMS's topic in Modifying your Golf R MK7
First Map 2 log all through 4th gear - looks very good to me bar a tiny bit of ignition pull low down, amazed at how closely it tracks the ecu_psi too. -
Burger Tuning JB4 information thread
nwmark replied to george@BMS's topic in Modifying your Golf R MK7
Of course -
Burger Tuning JB4 information thread
nwmark replied to george@BMS's topic in Modifying your Golf R MK7
Sorry maybe that's not very clear I mean the AFR wire that you put into the harness is blue, I tapped the red AFR wire from the grey plug. -
Burger Tuning JB4 information thread
nwmark replied to george@BMS's topic in Modifying your Golf R MK7
I did the JB1 to JB4 upgrade last night, its really straight forward the instructions are good. ​A few extra thoughts. ​- Adding the pins to the harness is really easy - instructions are clear and easy to follow, apart from they show the AFR harness wire as black, mine was blue. (when you undo the screws of the connector watch you don't lose the little nuts from the back or the little screws. - Being an old get trying to squeeze in the footwell and feeding the cable was a pain - helped by goRt pics on the previous page though - I taped the small connector to the end of a skewer and after a cutting a slit in the grommet, pushed it through and up with the skewer - easy peasy. - You are aiming vertically up and right with the skewer. (ps if you're doing this on an S3 the grommet is behind the hard grey cover just lift it up from the bottom) ​- I tried to avoid the peddles as much as possible so fed it around the air vents that are under there. I also think the actual OBD connector is wired on the wrong side as you need to loop the cable back over the connector would have been neater wired on the other side, is that a little bit OCD though? ​- I fed the engine part of this cable around the back of the engine bay behind the AFR cable in fact tucked behind the heat shield. - positab, I didn't pull back the sheath covering the wires I cut a slit in it just near to were it clips to the firewall and did it there, this way you can hardly see the positab. Not been for a run in it yet but it started fine with no lights or errors, came on Map 1 so switched to Map 2 and will do some logging soon. -
Burger Tuning JB4 information thread
nwmark replied to george@BMS's topic in Modifying your Golf R MK7
My upgrade has been delivered too but i'm stuck in work! And a big drive due on Friday so will offer some initial feedback. I had my JB1 custom Map 6 on the dyno, once i get a chance to iron out a good map 6 ill be back on the dyno to see the difference. -
Burger Tuning JB4 information thread
nwmark replied to george@BMS's topic in Modifying your Golf R MK7
Thanks for the update. fingers crossed for a nice UPS update text sometime later today. -
Burger Tuning JB4 information thread
nwmark replied to george@BMS's topic in Modifying your Golf R MK7
Mine has been delayed, had notification from UPS yesterday, but it looks like it wasn't sent in the end as its still at 'Ready for UPS' status -
Burger Tuning JB4 information thread
nwmark replied to george@BMS's topic in Modifying your Golf R MK7
​Me too ordered on the 18th Dec. -
I've had a good play with Map 1 and Map 6 on a DSG car. I find a custom map 6 much better when just driving around in D, map 1 feels livelier lower down but I suppose it should do having more boost down there but I feel the advantages when 'on it' don't make up for the 'jerkyness' when in D and commuting. ​My current favourite map6 settings ​1500 - 0 2000 - 1.4 2500 - 2.4 3000 - 3.0 (currently trying this at 3.4 ​3500 - 4.0 and this at 4.8 - cant decide if I like it yet) ​4000 - 5.0 4500 - 5.0 5000 - 5.2 5500 - 5.2 ​6000 - 5.2 6500 - 4.8 ​7000 - 4.0 ​I'm sure i've read on Golf Mk7 forums from George to stick with 0.2 incremental changes too, no harm in 0.1 but 'something' isn't accurate enough, so stick with 0.2.
-
Burger Tuning JB1 Information thread
nwmark replied to george@BMS's topic in Modifying your Golf R MK7
93 octane would be super unleaded in the US, so similar to our 98/99 ron here. ​5.2 is pretty much the limit without DP, and even then I would recommend you do some logging to make sure timing isn't being pulled too much (or if you don't have vcds, use the KB1 for logging and ake sure you don't get minor throttle closures shown by short term low boost).- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Yes small world I was there yesterday so most probably was - I was parked in the multi story. ​I saw a couple of Golf R's there yesterday - Red one when on the way in and a Blue one parked up along the side near Ted Baker (if I remember correctly)
-
Managed a diversion on the way to Llandudno last week and got a couple of snaps. And one at the start (or end) of the evo triangle
-
Thanks - that looks good I've just signed up.
-
I do really like the saloon I think the smaller dimensions on the A3 really suit it - first time with a DSG so still getting used to that at the minute.
-
Inters 2016 (GTI International 2016)
nwmark replied to admin's topic in Future Meets, Track Days, & Events
I'll be there on the Sunday - first time for me I'll come and say hello- 64 replies
-
- gti international
- inters
-
(and 1 more)
Tagged with:
-
Was a choice between the golf and S3 but fancied trying a saloon instead of a hatch for a change.
-
R400 is coming..? Auto Express seem to think so
nwmark replied to VW R-300's topic in VW Golf R400 Chat
Auto Express usually means photoshop special and rumours dug from the latest Internet rumor. -
I quite like the understated look but I'm old and boring - grey or lack for me. Seems about 80% are Nitrous Blue though.
-
That sounds like the start of a mini meet