Jump to content

Richard_R20

New Members
  • Posts

    10
  • Joined

  • Last visited

Personal Information

  • Name
    Richard

Recent Profile Visitors

779 profile views

Richard_R20's Achievements

Member

Member (2/9)

2

Reputation

  1. There's a question for you two threads below matey, in the 6R newbie thread - about some springs you have or had in your shed 😁
  2. Sorry to revive an old thread. The spring that we're sat in your shed - did you sell them? edit: a reply for invisiblekid
  3. I have the dynaudio from the factory and am not overly impressed. Definitely haven't notice any low hz frequencies from a sub either, didn't know it had one until this thread, so will be checking mine tomorrow. Came me from an 8P S3 with Bose & that was brilliant.
  4. I have looked at the VWR kit but was told it gave a very "crashy" ride. Not sure how true that is as it's only opinion, not first hand experience. Im not looking at coilovers yet, due to having the ACC. But I am considering a 40mm H&R kit.
  5. Hi Rich, R-Tech recommend the clean @60k. Whilst the injectors/HPFP/inlet clean did not solve the misfire entirely, the 170 mile journey home even with the misfiring R did feel better. The mileage on the R was 56k when the work was carried out.
  6. Seen a very reasonale used H&R kit on the bay, from a GTi. I am aware the part numbers of the springs are different from the Golf R to the GTI, but apart from weight of the R, what is the difference between the springs & will they fit the R?
  7. The 6R is a MUCH better looking car. Less on the road too. I find the 7R is everywhere & is pretty boring looking. The 6R stands out much more & I wouldn't swap. The feel of the 6R with a few mods is a much better driving experience IMO. I've got a white 3dr, Nav, Dynaudio, Full leather, Sunroof, 19's, Climate, ACC, APR Stage 1+, 3" Scorpion exhaust, downpipe with sports cat & a VWR induction kit. Just shopping around for some lowering springs now.
  8. Thanks for the reply gents. Got to the bottom of it - here's the info incase anybody else suffers the same issue. So, the car was serviced: plugs, oil filter, oil, fuel filter & the misfire was still there. I then swapped out the coils for OEM & still it persisted. From here I decided it was an injector issue after doing some logging. The logs seemed normal, fuel wise what was requested and what was delivered was spot on. The only thing I was unable to do was injector output so I went ahead and seized upon an offer from R-Tech, injectors tested & cleaned, HPFP cleaned & the inlet manifold walnut blasted/cleaned. The price was good so I travelled 340 miles all in to leave the keys in the hands of Niki & the team. Once that was done, another fuel filter was fitted & Niki took it out to do some logging & unfortunately the misfire was still there. Although he did come back with news it was the APR stage 1 map with incorrect injection timings high up the rev range causing it to misfire. Niki got intouch with Mark Ash @ APR & a couple of days later I had a new APR Stage 1+ file ready for me. So went down to AwesomeGTI to have the new map put on & no more misfiring, and the car ran 348bhp on the dyno, which was good news.
  9. So my R is due a service. I have a slight misfire which logged a code but didn't turn on the EML light, it was logged when reading the codes. I've swapped the coils and the same, so next is the plugs. I want the stamp in the book so I'm getting its major service done from a garage. When dropping the car off, I explained about the misfire & he removed the oil cap with the engine running and the car seemed to want to die, it was sucking in air from the cap, and he said this indicated a nackered PCV & could cause the misfire. The car is fine on idle when the cap is on, and runs fine apart from booting it when I get the mis fire. So does that indicate the PCV is nackered? What should happen when you remove the filler cap with the engine running?
  10. Hi, New to the site but here's my first topic. I have a misfire on 4 & 2. So going to start with the coil pack. Ive been looking at the R8 coil pack from awesome GTI. However I have also found Euro car parts equivalent for an R8 by HAAS but just want to clarification on whether they will fit the 6R? Part number: 413440561 ECP link: http://www.eurocarparts.com/stores/cnc/changecncstore/?lat=54.421703&long=-1.240117 Cheers
×
×
  • Create New...