Link
Members-
Posts
70 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by Link
-
interesting you say that, I am big fan of the old school lag feeling too, as you say not the fastest or most efficient way of deploying power I am sure but isn't half fun ! ;), I have a JB1 and will prob stick with it. Thanks for the heads up !
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
I am now running Rich’s map 6, on the short journey today seems great !. Thanks Rich- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
If you compare Rich's custom map 6 and default map1 they are pretty similar but with a higher peak boost, so if you like the way default map1 runs then you will have an idea (based on how the numbers look). I am on default map1 with boost of 4.8, seems very impressive so far, but will be going map6 shortly- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
This was a brand new unit from jbshop in the UK (or was sold as to me). Something not quite right here. How on do I contact George ?- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
Just connected to my JB1 with the laptop, looks like the default boost safety for map 1 is 3.5 ?, thought it was meant to be 4.5 ?.- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
That will be fine, if the battery has come off then your radio stations etc would have gone so you would def have known.
-
all this assumes the mk7 Revo code offers switchable maps, I haven’t actually looked, just assumed it does based on the OP question. Some ECU don’t offer switchable in which case nothing is changeable by the user and also means nothing is lost on power cycling. So a non switchable Revo is the same as any other map and won’t be affected by power cycle. Hope that makes sense
-
If they actually cut power to the ecu it would loose settings, but only in that scenario. Dealers will avoid removing all power unless they have to. I doubt battery check will have done that. I actually have a sps switch I need to sell from a mk6 edition 35. Not sure if the same switch works on Mk7
-
You have to go back to a Revo dealer to get it reset.(if you don’t have the sps switch) Revo doesn’t actually change maps, there are adjustment tables in the base map, these adjustments get lost on power cycle. It defaults back to the ‘generic’ settings for these tables which are near standard levels of power output. But the map is actually still Revo, just not adjusted to make any more power than stock really. In reality the Revo ‘stock’ settings are slightly more performant than actually stock. I can’t rememebr the actual boost levels for example but it’s slightyl more than stock
-
Definate answer on TD1 code logged by modding?
Link replied to mikef4uk's topic in Modifying your Golf R MK7
nope, jb1 not detectable once removed, ever since tuning boxes became more popular there has been rumours that ECU manufactures can add a feature to look for out of bounds signals (in comparison to other sensor signals) and flag those, but its not been done by any manufacturer yet. They way tuning boxes work is (at the simplest level) only the same as driving the car in different environmental conditions. For example, if you drive at very high altitude, the air is thinner and the turbo will need to work harder to generate the same levels of boost. Tuning boxes exploit this feature of the ECU, i.e. it can cater for such changes, and use that flexibility to make it produce more power. Once the box has been removed and the car driven a few miles for the adaptation tables to move back for normal and trace of anything at all is simply gone. As far as the ECU is concerned nothing odd or out of its acceptable perimeters has changed. I would avoid a remap, they are always detectable even when flashed back, some companies require they physically open the ECU and solder points to the PCB board others flash via the OBD connector. OBD leaves a trace, opening the ECU leaves physical marks on the ECU case as the thing has to be prised open. Not to mention if you have to remove the map for warranty work you have to crack the ECU open each time. Avoid this like the plague, I had one car where I had the ECU opened, never again, despite the tuner taking their time to remove the case it was still really obvious to the tech at Audi, not to mention you are totally stuffed in terms of removing the map yourself if you have a issue. dealers perform two levels of TD1 scan, the most basic if for checksum and file id, this happens everytime a car is plugged in, generally even the OBD tunes will pass this, the next level is when they scan the entire ECU, byte by byte, this is a binary comparison to what should be in the ECU. This will show any change from factory, from what I gather even a OBD flashed back to stock leaves another memory area with a byte changed, which is flagged. This change doesn't actually say what had been tuned, rather that something had changed at somepoiint, so not sure if a TD1 would be raised, and even then how they prove it had been tuned as a result, I don't know. I know people who have had a Superchips bluefin tune flashed back to stock via obd, went into the dealer, no td1. However they won't have performed the deep scan unless a warranty claim was being made. -
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
Just fitted the JB1, unfortunately I have been pretty much out of action for the last week due to having the flu, still not feeling good so only performed a basic test drive and check for fault codes with VCDS. Fitting wasn't too bad, will def be much easier the next time now I know how I routed cables and how connectors come off. Performance wise it seems great, just as good as a stage 1, there is a def increase in shove and tbh it needs time to adapt as I cleared the adaptation tables in the ECU after fitting the jb1 so its starting from nothing. I will def get more responsive once adapted. I just don't feel well enough to take a long test drive. I managed to connect it ok to my computer and left it on map 1, will dabble no doubt with map6 at some point. The bluetooth module would be nice at this stage but the cost was silly £100+ for a BT module, must be a 1000% markup on that !.- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
Like you I have always had maps (Revo, APR, DMS (terrible), Superchips etc), the only car I had a tuning box on was my M135 BMW, and tbh it was just as good as a map, so I am optimistic- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
sure, will report back, not sure when I am going to fit it, it is meant to be a xmas present to me so I should wait.... yes, I will start at default, get a feel for it, then plan to turn the boost increase to 5.0 (as per Rich's info), then try his map 6, and possibly tweak this to give the sort of feeling I like, but sounds like it could be good to go as is. A friend of mine has a bluefin installed on his R so interested to see the difference. That wasn't massively impressive, seemed to have a odd step change in power delivery at around 4k which didn't feel particular smooth or correct, could be something off with his car.- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
Many thanks- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
well I wasn't expecting a velvet box :), but thought there might have been at least a box with their logo on, paper work etc ?, it just seemed a little 'eBay' in the packaging style. I am not worried if this is the way they ship, just wondering if this was normal as it felt a but like a unit from a man in a shed from the packaging.- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
my JB1 arrived from JB4 shop uk, is it normal for it to arrive in no fancy packaging, just the unit in a brown box with some bubble wrap, no paper work or anything else ?- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
Thanks. Should arrice today. In in terms of fitting, is connector D def a undertray off job or can it be done from above ?- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
fuel open loop is a single setting - one value, from what I gather the standard maps if comets loaded with have the setting of 25, when you make changes to map 1 or map 6, taking the boost add to 5.0 or above you need to change the fuel setting from 25 to 40 (Rich_d knows way more than me). you don't need an excel from Rich, you just enter those values yourself, takes a minute to do, then save the values to the JB1, the hard part is finding these settings that work (which he has done). I was not aware the fuel open loop setting based on the info I read at the start of this thread by George.- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
Thats really great, many thanks interestingly i have not read (in my fairly linited research) anything about the fuel open loop change. From what I have seen I don’t think most people are changing that on map 1 ? (I def could be wrong) thanks again- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
Great thanks, would be great to get those profiles, much appreciated ! yes I have ordered the cable also- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
Also does anyone know the boost by rpm settings for map1 so you can start with that on map 6 and tweet from there ?- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Burger Tuning JB1 Information thread
Link replied to george@BMS's topic in Modifying your Golf R MK7
Just placed my order for a JB1, toyed with the idea of a Bluefin or other maps but I have plenty of warranty left and its just not worth the risk for me for any potential gain in power with a map over a box. What sort of custom profiles are people running on map 6, I quite like the old school lag - surge feeling you get as you get boost, I guess you can map this in on map 6 by bringing the boost in larger step at about 3k ?, is that right George ? Thanks- 351 replies
-
- JB1
- Burger Tuning
-
(and 2 more)
Tagged with:
-
Tuning Boxes on 7.5R - FSR+ Vs JB1/4 opinions.
Link replied to SIMK7.5's topic in Modifying your Golf R MK7
Re-reading the thread I assume you do have to remove the ECU, open it and bench flash, that most certainly does not protect you from detection, I had a previous car bench flashed my DMS and it was a nightmare, the ECU case never looks the same once prised open (obvious to anyone looking) and I had issues with ECU faults from their bodged bench flashing. I would never have a ECU tune which requires the ECU to be opened. As someone else said if you are really worried about warranty don't tune at all, but failing that a tuning box is the least likely to be detected. There has been talk about ECU's making comparisons between sensors to look for a pattern of adverse readings which a tuning box would introduce but I haven't seen or heard of anyone having a TD1 thrown from a removed tuning box. -
Tuning Boxes on 7.5R - FSR+ Vs JB1/4 opinions.
Link replied to SIMK7.5's topic in Modifying your Golf R MK7
Hi Rick, Does this mean you do not flash via OBD and need to open the ECU ? -
you're not wrong, some days I think its gone, then listen for it, then can't hear anything else ! haha