Jump to content

Jacobrownoly

Members
  • Posts

    119
  • Joined

  • Last visited

Everything posted by Jacobrownoly

  1. How did u get on with this? Mine is still doing it after the new DV install so I don’t think it’s that. Apparently this is a common Issue when the car is mapped. It’s annoying the noise but I can’t think it’s doing harm, mine has been like that for over a year now and it still pulls really well. Just wish I knew what the noise was.
  2. Yeah that’s it. Annoying but will have to do. We all have to live with them I guess. My bonnet is covered with them too 😪
  3. Managed to touch it in with some gloss black touch up. It will have to do I guess 👍🏼
  4. So here’s an update! I have concluded that you can’t really do “touchless” wheel cleaning If you want your wheels completely clean. As my wheels are sealed with C5 I pressured washed them first with just water then I used 10:1 Billberry wheel cleaner (a good amount too on each wheel) rinsed them off and blow dried each wheel with a small leaf blower. The result wasn’t great...😢 Once dry, the brake dust was still there and when I touched the wheel, the dust came off on my finger revealing the nice gloss black underneath. The following week I did the same again but used a lambs wool mitt very softly over the wheel with a good amount of water and shampoo and the results where much much better. The break dust was away and on inspeaction with a LED touch there was hardly any swirls. Time will tell with this method as the wheels are brand new. So in conclusion, for me anyway, you have to touch the wheel to get a good clean. PS - only 2 weeks having the newly power coated wheels I already have found a small stone chip on one of the alloys too, the joys of gloss black. 🙄
  5. Yeah really impressed, much better than the stock setup. If you are doing it tho, I would probably order new or uprated top mounts as they are prone to fail on these cars.
  6. Hi, After some advice on how you guys clean/maintain your coilovers. 6 months ago I put some b14 Bilstein coilovers on and this weekend I am going to be removing my wheels for a clean. While I am at it, I want to clean/protect my coilovers. My plan is just to let them soak in traffic film and then give them a wash with some car shampoo. What do you guys do? Also, how do you add protection after you have washed them? I have heard of people using wd40, what’s the best thing to do? Many thanks !
  7. Yeah was very close to going back to silver tbh, it’s probably too late now! The boy has probably just done them by now! In my opinion, Gloss black looks the best on LSG. If I had any other colour of R I would go for the standard silver but LSG can’t beat the Gloss Black.
  8. This is exactly my thinking. I really don’t wanna have to touch the wheel with a mitt, if it was any other colour than gloss black then yes, fair enough but black is a nightmare as we all know. After I have sealed them I will probably use a light enough general cleaner sprayed on them then rinse them off with the pressure washer. My plan is to do this every other week during my routine car maintenance wash. I don’t wanna start using iron x again every other wash as this will just rip the coating off easier.
  9. Many thanks for that reply. Problem is, I don’t want to touch the wheels with a wash mitt after I have sealed them. Even the cleanest of wheels on gloss black will scratch / swirls on contact. So you recommend I just dilute my normal car shampoo into a spray bottle and use that along with my pressure washer ? Thanks again!
  10. Hi, Looking for some advice on Gloss Black Pretoria maintenance cleaning. I have just had all 4 of my wheels powered coated again and this time I want to look after them better as with gloss black I find even if you look at them the wrong way they scratch and swirl like crazy. 😪 My plan this time is to seal them with Gtechniq C5 wheel armour meaning that when it comes to my weekly wash I don't have to touch the wheel at all. So my question is what would be the best type of wheel cleaner to use in conjunction to C5 wheel armour? How do the guys on here clean your gloss black prets? Thanks
  11. Got the wheel home today, a quick jet spray and dry and it’s ready to be sealed with G Tech wheel armour 👍🏼
  12. Old thread this but I made an interesting discovery last night when I received my new Pret alloy through the post. I noticed that the new one I got states “Borbet” on it. What’s even more strange is the one that I cracked doesn’t have “Borbet” on it meaning it must be from the other manufacture (the cracked one had BBS on it) . My other 3 alloys have Borbet written on them. I also found that when comparing the weight difference between the two, the Borbet was noticeable lighter...again, pretty interesting. (No, it’s not a rep the one I cracked because it had the same product code / stamps as the others) So could the Borbet Pret be the better alloy? Funny how the only one that wasn’t Borbet on the car cracked and felt heavier too. I don’t know how I ended up in the first place with 3 Borbet and 1 from the other. I did buy them 2nd hand last year (came off a Mk7.5) and got them refurbished by someone who at the time had different sets of prets he was sorting out...so maybe he mixed one of mine up, I really don’t know. In conclusion I would say the Borbet is the better alloy when sourcing prets!
  13. It’s funny because the one I cracked I can’t even remember doing it. But one night driving home from Edinburgh my drivers front tyre hit one of the biggest potholes I have ever felt / seen. I also feared the worse and was raging with myself for not seeing it. Took the wheel off and found no damage what so ever and I was amazed. Then a couple of months later I find my back passenger alloy has a crack. Strange thing these prets...
  14. I understand what you are saying and I nearly went down that route but to me there is something not right about putting rep prets on a 20k golf r. That’s just my opinion tho, I am sure the CM prets will be top notch.
  15. Update! So took the wheel to the boy today and long story short he doesn’t recommend that I repair it so I have just bought a second hand one off EBay for £400 which seems to be in mint condition. 👍🏼
  16. As stated above, this lad Is a professional in welding alloy wheels. He never said anything about welding suspension struts for race cars he said alloys. Yes lol...glueing an alloy, not one of my finer moments 👍🏼
  17. No, he didn’t say anything about a guarantee. He’s seems to know what he’s talking about in fairness 👍🏼
  18. So spoke with the boy this morning that’s going to be doing my wheel and he seemed very clued up on welding alloy wheels. Told me he’s done loads and that he’s done welds for racing track cars too, so this has filled me with a bit of confidence. Handing the wheel in tomorrow so will keep you posted. Thanks
  19. Yes, I believe the tyre is fine. Tbh, I think I am going to get it repaired. I know a well known reputable company next door to me that specialise in welding. I will take it to them sometime next week to get an opinion on if it will be safe enough to repair. I know it’s not uncommon for people to get alloys repaired so hopefully they can do a good job. I will keep everyone posted. Thanks again 😊
  20. Yeah not one of my best ideas....😔
  21. That gunk mark is actually a special seal/glue that we tried on it first and it did work for a couple of months. The fact that most people have said to bin this alloy is making me rethink the whole getting it fixed 😕 I didnt even think it was that bad....but I will probably take the advice and look for a new alloy Thanks everyone
  22. A common issue I know but I cracked one of my Pretoria alloys! Getting it welded in a couple of week but my question is, will this be ok in the future? Should it be strong enough? Anyone else had one welded that’s still be ok? thanks
  23. No, I un-ticked the 'use aggressive mode' on vagcom as mention and it never came up again. Car has been spot on ever since.
×
×
  • Create New...