Jump to content

scott-o

Members
  • Posts

    69
  • Joined

  • Last visited

Everything posted by scott-o

  1. I've always been curious where these fit. Could you stick some pics up once its all in please? Glad you got sorted!
  2. Thats great to see. People get so obsessed with low mileage and often its worse for the car not to get driven very often. I was happy to buy mine on 48k whereas others are happy to buy a car on 20k less miles for another 5 grand. I opted out of a company car at work and took the allowance, R estate seemed the best all round choice.
  3. This is a great idea and makes so much sense for the standard states of tuning with the basic mods but sadly too late for myself or i'd have been putting an order in right away! My general impatience to wait for anything had me going with Mountune some months ago.
  4. Awesome job, i think i may have seen it on instagram the other day too as it looks familiar! I'd love to go down the same route with my estate but the other toy takes up all the money and im supposed to be keeping the golf standard 😁
  5. Looks awesome, I wish you many happy miles!
  6. It says 'do not drive at low engine speeds' in the manual. I read it as don't keep the revs low whilst driving at any speed, it's bad for fresh engines to do that. I.e don't granny it around in comfort for 1000 miles, not going over 2k rpm. Engines need load on them, also revs and throttle but in moderation to bed in correctly but as I said I'm sure they are already done to some degree at factory otherwise they would have bedding in oil in them and need changing after the run in period. I didn't say they have bedding in oil in them.
  7. You wont have to up it much at all if you compromise on the options. I really wanted the pano roof and would have perhaps done without but i got lucky in that respect! Sadly didnt get lucky in other aspects (rear diff died less than 2k after buying it for example but thats another story!)
  8. I did the same as you and went for a Golf R Estate, hardly any dip into the 16k bracket, think there was 3 when i was looking 1.5 months ago and 2 of them were completely basic spec and not the best condition. Ended up paying a bit more but got a nicely specified Lapiz Blue one with the pano roof. Reversing camera would have been nice but i wasnt bothered it didnt have it and i didnt want DCC so perfect spec for me. Even then it needed its big service which only got me £500 off (service came in at £400).
  9. Varying revs and plenty of engine breaking are best to bed engines in, you need to work them otherwise the rings wont bed in and it'll end up using oil. No more than 2/3rd's throttle and limit to 5k rpm max. I genuinely dont think they need breaking in properly from scratch though otherwise they would come with breaking in oil in them and need an oil change after the period. Depends what keeps your mind at rest with your car, go with that. It seems they have some form of breaking in when they are built, not because of modern engineering methods and oils. My other cars engine is nigh on 50 years old and built to higher tolerances than my golf r engine, still needed to bed the rings in and run it on bedding in oil to get the rings ran in properly (which is the main thing). I just got out into the hills on twisty B-roads where you're forced to go up and down the gears constantly, will help you get to grips with the car too!
  10. It kinda tells you the opposite, 'do not drive at engine speeds that are too low'. Low engine speeds glaze the bores and it'll end up using oil in the long run. 2/3rd's throttle, 5k rpm and plenty of engine breaking if you're treating it as a completely fresh engine, which im sure they arent other-wise they would have break in oil in them and need an oil change at the end of the running in period.
  11. Quicksale Sports and Performance. They build and maintain Porsches mainly but do lots of BMW and VW Audi group stuff too. They've got a wide range of techs working for them and good kit so I think they could do a good job of anything to be honest. I've used them for everything I've had since I moved up here and never had bad service or been shocked at the prices.
  12. That's fair, I did think after I asked that you might be somewhere more expensive than where I am (the north east, nice and cheap haha)
  13. Good idea and the front one can be changed too. I'll be getting mine done next time it's in. Seems quite expensive for your quote though? Haldex service at my indy is £90 Inc taking the pump out and doing the filter. The haldex fluid is about 2.5x the price of the gear oil.
  14. Well they are my thoughts as well, i cant imagine they could care less. I've emailed them anyway with pictures etc. but again feel its a waste of time and i dont think its likely ill get any response.
  15. How would i go about doing that? I was going to email them with pictures just for their info but i've always found VW useless with correspondence and the like! I've scrapped the casings and haldex transfer side and just kept the diff as a memento (the bit thats actually failed i guess)
  16. It's worn all the teeth if you zoom in, then they've started to break off as they've got too thin. No doubt the rest were shortly to follow, about half were fully gone.
  17. My insurance is void unless i use a steering lock, they recommended i used a diskloc.
  18. Bought second hand (I'm the third owner) and I've got all the mechanical sympathy in the world but that can never be said for certain for the previous owners as I don't know them, although the car itself is great condition and definitely been looked after by them. You can tell from the crown wheel on the diff it's just ground down over time though and points to it being defective, nothing to do with any mistreatment etc. There's no heat discoloration and all bearings etc were solid enough and not defective. When diffs go due to launches etc they tend to be catastrophic and in big Lumps rather than a thick metal paste, this has been happening for a long time and the car did still drive believe it or not!
  19. Morning, I was getting ABS faults on the rear left intermittently (which knocked a whole load of other modules out), i replaced the sensor and the faults cleared for 4 days and then after id been driving enthusiastically it sounded like there was a wheel bearing noise from the rear and thinking back i'd been hearing this noise on and off for a few weeks. I got the car up in the air and check the diff oil, nothing came out, massive alarm bells along with all the fault lights coming back as i was pulling the car into the garage. I put around 900ml in and it still didnt reach the fill hole some how, which rang further alarm bells. There was no noises and all was well for around 10 miles and then bad noises started to occur which i knew was definitely the diff. I got the car into my mates garage and no oil came out of the diff when the drain plug was removed and 0 signs of any leaks. The oscilloscope waves for the senor were reading correctly so we knew the sensor wasnt at fault and neither was the reluctor ring on the wheel bearing. I decided to bite the bullet and buy a second hand diff (facelift diff from a 2018 car, revision J) and the haldex pump and ecu were swapped over from my previous diff as we knew the history of those and that they were good. God news is its all swapped over and working better than ever but we decided to strip the old diff to figure out where the oil was going and what sort of damage we could see. Pictures below, enjoy! We got the cups out and the oil flowed out: IMG_20191127_190551 by Scott Osborne, on Flickr The reason the oil wasnt draining out, blocked solid with sludge! IMG_20191127_191623 by Scott Osborne, on Flickr The diff: IMG_20191127_190909 by Scott Osborne, on Flickr Pinion Side: IMG_20191127_190849 by Scott Osborne, on Flickr Now it really doesnt seem like this is a common thing to occur and all the techs i've spoken to havent ever heard of it happening and bearing in mind the diff units are supposed to be 'sealed for life' from VW i.e. dont require the diff oil changing, it looks like a quality fault in the diff. It looks like the crown wheel on the diff just hasnt been treated properly (or at all) and its just ground itself away to the stage where the teeth have broken away completely, which is when i started getting the abs sensor faults as these were skipping over. Has anyone else seen something similar occur? Cheers, Scott
  20. Just to keep up to date for anyone else that comes across this thread. Facelift diff went in yesterday (revision J) which according to threads on Australian forums is the strongest one with a more rebust haldex clutch arrangement (whether that's true or not I don't know!). The abs sensor faults and the ones that come with it then completely cleared and all seems well with the world. I had a bit of a blast in it last night and it feels great. Cost wasn't horrendous in the end (second hand diffs are cheap and plentiful!) and the money I spent on sensors appears to be the only waste! I'm going back to the garage on Wednesday evening to strip the old diff/ haldex unit to figure out the damage. The garage I use are as curious as me about what's gone wrong with it!
  21. Watched that a couple of times, had a good chuckle! As others have said, shows you how easy these cars are too drive. Dont see the problem with the video myself but i wouldnt let my car be used like that, mainly because the surface looks crap and full of potholes etc.
  22. Glad you got sorted! My errors came back on the rear left sensor then shortly after my diff died so it looks like the two were attributed i.e. rear left wheel turning different to what it should have been and throwing the faults. Second hand facelift diff going in at the end of the week hopefully and then i pray for no more trouble or the car will be going the journey. It was a great buy and such an awesome car for the first month and a bit but i bought a more modern car to try and get some reliability. At least with older cars you expect some failures to some degree!
  23. If the only reason you're worried about keeping it is value then i think i'd keep it. You'll only end up shelling out even more than the value you will loose to get into a newer car that you wont like as much, only to then loose all of that and more again in depreciation. I dont see the appeal of any new cars at the prices they are commanding, prices have just gone stupid. I bought my R as a sensible daily driver, 3.5 years old and 20k-ish lost in depreciation by the previous owners. I couldnt sleep at night knowing i was burning away that money on a golf, just seems crazy yet people seem willing to do it over and over again. My suggestion was going to be keep the golf and go further with it and/ or buy another car to enjoy but i see you already have the mk2 😁 i had a white 3 door big bumper gti as well so it brings back memories. It only had 52k on it when i bought it some 8 years ago and i bought it with my house savings then 3 years later sold it for 3k profit having owned one of my childhood dream cars. The way the world is going, now is the time to enjoy cars we will never get again, not strive to get into the newest (insert whichever manufacturers generic 2.0t awd hatch here). I write the above as a generic post, not directed at the OP.
  24. I ordered a wheel speed sensor, an ATE one as VW fit, but didnt realise until i got home i'd been given a Bosch one. I fitted it anyway as it only takes 10 minutes and drove round the block a few times and error codes kept coming back. Left it for the evening to see how it would be on the morning, all was fine with the world, car behaving perfectly but when i scanned the car it was full of errors still and as soon as i scanned it everything stopped working properly. Carried on my journey and parked up in the multistory and cleared all the errors, this time they cleared fully and the car has been fine ever since. I've scanned it after every drive with no errors. I've done multiple journeys now and tried to replicate the conditions that made everything go haywire but it all seems fine. I did speak to an old friend who co-owns a small chain of VAG specialist garages and he did say there's a small amount of self learning if the sensors are in tolerance. When i ran live data on the wheel speed sensors they were all showing the same speed even with the faults thrown up, i can only assume it did the self learning. I did flap at first and ordered another sensor but rang VW this time, they were actually cheaper than euro car parts at £72! The abs sensor i've replaced made 9 control modules go faulty (between 18-26 error codes!) and some of the codes related to the ABS control module, the ACC system wouldnt work, hill hold, park assistant, traction control etc. I dont think there will have been anything wrong with your ABS controller, it'll likely be an abs wheel sensor from speaking to my old friend and research i've done whilst this has been happening. He said if its not the sensor then occasionally its the reluctor ring, which is part of the wheel bearing assembly (that was going to be my next port of call since the battery seems to be fine). Hope you get sorted soon.
  25. To update on this, car is intermittently fine until i switch it off then back on again and either some or all of the warnings come back up, it varies. The ACC kept making itself available then unavailable sporadically for example, when i had it turned on. OBD 11 showed up just after lunch so i popped out to scan the car, lots of faults mainly down to invalid data received etc. then in the braking section i had a few faults that said they were down to wheel speed sensor implausible signal and that the rear left one appeared to be at fault. I've got one on order to pick up after work and hopefully get it swapped over tonight, fingers crossed thats it for now until the next one dies! I'll update the thread.
×
×
  • Create New...