Jump to content

W4ff13

Members
  • Posts

    52
  • Joined

  • Last visited

Everything posted by W4ff13

  1. Hi @dv52, definitely got a PRO subscription. I seem to be able to get equivalent freeze frame data on a per fault code basis, let me try reinstalling the app and trying again from scratch. Assume the level of subscription is linked to login details, so shouldn't be an issue that I logged in and used the generic app first before I tired the vag one? I have both installed in parallel currently.
  2. Thanks @dv52, apologies for the delay in response. I got the vag specific app last weekend, checked settings to include freeze frame data, then on first scan a popup appeared which I think asked me to include or exclude freeze frame data. I did the classic muscle memory and just clicked the left options, which must have been exclude. I now can't seem to get the option to reoccur to let me select include which is frustrating. Setting still says to include but my history export looks no different to the generic app version. Guess I'll try uninstalling and reinstalling the app and see if that re prompts me.
  3. Thanks @dv52, however I note the app must have been recently updated and I'm struggling to find anything online that's up to date. Settings menu screenshot attached, there is no option to enable freeze frame data? I did rerun a scan this morning and it's brought back one fault, seems fairly generic to do with databus under ACC, I'm wondering if it's linked to the previous cyl4 camshaft actuator but that's not retriggered a code yet. In the details menu for the fault I can see and screenshot the freeze frame - image attached.
  4. OK, ran a full scan which showed 25 codes, however most of these I can attribute to things that have happened during my ownership; blown headlight bulb, acc issues, park level microswitch and a fair few to do with the failing/failed alternator. Looks like they didn't clear (or perhaps even check?) codes at any point during warranty work? I have now cleared all codes as I want to set a baseline and go from here with anything new that pops up. @dv52 I've got a txt file to attach but it's not an allowed format? Also, the OBD11 3 app looks slightly different to the guides so I've done what I think is correct from the History menu. I've pasted raw text below without modifying and note it does include a couple of minor adaptations I did straight away for soundaktor off and engine start/stop off. OBDeleven data log for the last 4643 days Date: 2026-09-18 12:20 VIN: REDACTED Car: Volkswagen Golf Year: - Mileage: 77664 KM --------------------------------------------------------------- History item: Adaptation (UDS) Time: 2026-09-18 11:50:54 Control Unit: (01) Engine active → not active --------------------------------------------------------------- History item: Adaptation (UDS) Time: 2026-09-18 11:48:33 Control Unit: (A9) Structure Borne Sound 100.0 → 0 % --------------------------------------------------------------- History item: Full Backup Time: 2026-09-18 11:47:37 Mileage: 77664 KM Name: Baseline Backup Control Units: 19 --------------------------------------------------------------- History item: Fault Clear Time: 2026-09-18 11:39:19 Mileage: 77664 KM Total control units: 0 Faults before: 25 Faults after: 0 --------------------------------------------------------------- History item: Full Scan Time: 2026-09-18 11:34:54 Mileage: 77664 KM Total control units: 19 Scanned control units: 19 Fault count: 25 --------------------------------------------------------------- Control Unit: (16) Steering Column ODX: EV_SMLSVALEOMQB_001015 System: Lenks.Modul Protocol: CAN: UDS Serial number: 20160809500348 Faults: B116229 - Selector lever park position lock switch --------------------------------------------------------------- Control Unit: (A9) Structure Borne Sound ODX: EV_SoundActuaGen2AU64X_003010 System: SAS-GEN 2 Protocol: CAN: UDS Serial number: 160613200923 Faults: No trouble codes found --------------------------------------------------------------- Control Unit: (03) Brakes ODX: EV_Brake1UDSContiMK100IPB_035019 System: ESC Protocol: CAN: UDS Serial number: 62186000000845 Faults: C115614 - AUTO HOLD - button lamp C100C01 - Electro-mechanical parking brake button C114513 - Button lamp for electrical parking brake --------------------------------------------------------------- Control Unit: (44) Steering Assistance ODX: EV_SteerAssisMQB_013144 System: EPS_MQB_ZFLS Protocol: CAN: UDS Serial number: - Faults: U101100 - Supply voltage U140000 - Function restriction --------------------------------------------------------------- Control Unit: (09) Central Electrics ODX: EV_BodyContrModul1UDSBosc_015002 System: BCM PQ37BOSCH Protocol: CAN: UDS Serial number: 865817071600UA Faults: No trouble codes found --------------------------------------------------------------- Control Unit: (08) Air Conditioning ODX: EV_ACClimaBHBVW37X_006142 System: Climatronic Protocol: CAN: UDS Serial number: - Faults: B10A911 - A/C compressor activation B10CE00 - Blower reduction by energy management B10CD00 - Function limitation due to energy management --------------------------------------------------------------- Control Unit: (14) Wheel Dampening ODX: EV_DRCONTITEMIC_001019 System: DAEMPFUNGS-SG Protocol: CAN: UDS Serial number: 11071641350730 Faults: No trouble codes found --------------------------------------------------------------- Control Unit: (19) Gateway ODX: EV_GatewConti_013020 System: GW MQB High Protocol: CAN: UDS Serial number: 24071610800716 Faults: P1B0000 - Generator P1B0100 - Generator --------------------------------------------------------------- Control Unit: (42) Driver Door ODX: EV_DCUDriveSideEWMAXCONT_006001 System: TSG FS Protocol: CAN: UDS Serial number: 0000209920711 Faults: No trouble codes found --------------------------------------------------------------- Control Unit: (01) Engine ODX: EV_ECM20TFS0205G0906259J_001002 System: 2.0l R4 TFSI Protocol: CAN: UDS Serial number: - Faults: P050700 - Idle Control System U112300 - Data bus error value received U044700 - Invalid Data Received From Serial Data Gateway Module "A" P11AE00 - Cam adjuster "A" cylinder 4 --------------------------------------------------------------- Control Unit: (15) Airbag ODX: EV_AirbaVW20SMEVW37X_002130 System: AirbagVW20 Protocol: CAN: UDS Serial number: 003MLR1Y2FNJ Faults: No trouble codes found --------------------------------------------------------------- Control Unit: (17) Dashboard ODX: EV_DashBoardVDDMQBAB_009051 System: KOMBI Protocol: CAN: UDS Serial number: - Faults: No trouble codes found --------------------------------------------------------------- Control Unit: (52) Passenger Door ODX: EV_DCUPasseSideEWMAXCONT_006001 System: TSG BFS Protocol: CAN: UDS Serial number: 0000210689219 Faults: No trouble codes found --------------------------------------------------------------- Control Unit: (13) Adaptive Cruise Control ODX: EV_ACCBOSCHVW416_001005 System: ACC BOSCH MQB Protocol: CAN: UDS Serial number: - Faults: U112300 - Data bus error value received U112200 - Data bus implausible message U112300 - Data bus error value received U112200 - Data bus implausible message U112200 - Data bus implausible message --------------------------------------------------------------- Control Unit: (22) All Wheel Drive ODX: EV_AllWheelContrHA1VW37X_004013 System: Haldex4Motion Protocol: CAN: UDS Serial number: HA1-00027.06.1600014288 Faults: No trouble codes found --------------------------------------------------------------- Control Unit: (5F) Multimedia ODX: EV_MUStd4CTSAT_001022 System: MU-S-ND-ER Protocol: CAN: UDS Serial number: VWZAZ2S0420770 Faults: U11B800 - Interface for external media --------------------------------------------------------------- Control Unit: (55) Headlight Regulation ODX: EV_HeadlRegulVWAFSMQB_001120 System: AFS-ECU Protocol: CAN: UDS Serial number: -------------- Faults: C108116 - Left headlamp power output stage C108216 - Right headlamp power output stage --------------------------------------------------------------- Control Unit: (02) Transmission ODX: EV_TCMDQ250021_001001 System: DQ250-6A MQB Protocol: CAN: UDS Serial number: TFK01606292889 Faults: U010300 - Lost Communication with Gear Shift Module --------------------------------------------------------------- Control Unit: (76) Parking Assistant ODX: EV_EPHVA18AU3700000_002026 System: PARKHILFE 8K Protocol: CAN: UDS Serial number: 39331621401867 Faults: B10FF13 - Parking aid indicator light
  5. Interesting updates, thanks both. OBD11 due for delivery today so will get a scan done etc. and we shall see.
  6. Afraid I don't know what it's called specifically, but I noticed mine was left disconnected recently after the car went in for warranty work. I had to look up what it was for and it's a vacuum line for the intake flap actuator I believe. Mine also had a tear where it pushes onto the airbox (it's a tight fit) but I cut about 10mm off the end and refitted. It doesn't affect running as such if it's not connected, but it should be using filtered air from the airbox rather than unfiltered "dirty" air which yours will be taking in through the rip. Personally, I'd just replace it with some generic silicone vacuum hose for what it is, but that's just me.
  7. Jeez, thats crazy, first I've heard of this. Will see what OBD11 confirms... Isn't this something the dealer would/should check?
  8. @dv52 Thank you for your detailed reply. I actually ordered OBD Eleven 3 PRO last night, Halfords had is at a good price with free delivery and £5 off for my club card, Amazon wanted like £50 more for the same thing?! I'd been watching OBD Eleven 2 units for ages but I see they've recently released the 3, so why not, it's not that much in terms of price difference and they seem to be phasing out the 2 unit going forwards anyhow. I'll report back once I've done a full scan, following your guidance linked above. @delboy01 also thank for for your replies and things to consider. I'll see what OBD Eleven can tell me, I like this sort of thing and have a few customisations I'd like to make (start/stop, headlight washers, sound actor and also being able to rewind the elec handbrake for rear pad changes down the line). I did have VCDS years ago for my mk4 so not totally new and happy enough to safely tinker. Still waiting on getting the car back after this alternator replacement, hopefully today.
  9. Thanks for the reply, totally agree, 10 years is still a fair amount of time I guess, but I've always had older cars and never had major components fail, especially multiple failures all withing a relatively short window. I don't think the car has had its odometer changed, I understand it's not impossible but also not an easy thing to do on the more modern cars - yes, it's 10 years old but it's not like the old minis with the odometer cable you could attach to a drill! The condition of the car doesn't indicate more than the mileage, plus it was first sold by the VW dealership in Glasgow (I have the original bill of sale) and did barely any miles through covid so it's likely been short city mileage plus sat for the best part of a couple of years. I use it daily and only do maybe 5k a year give or take, so if I'd owned it from new it would have only had 40k on the clock after 8 years and that's without covid so the mileage doesn't flag as a concern for me. Thinking about this last night, I've added to my potential list of remaining usual suspects, just as I'm now assuming anything that is classed as a common failure could fail on this car: - PCV system - Cam magnets/actuators - Battery (its been replaced with a 3yr Halfords one at some point) Anything else worth considering/being aware of? I'll be ordering OBD11 next month too.
  10. Hi All, Ages since I last posted, but thought I'd put this up as I wanted to sense check is they anything else I need to consider given my journey with this car so far. All I read online was how reliable they are, how people have 100k+ on them etc etc, yet within 2yrs of ownership of an approved used R estate I've had endless issues: - Water pump housing leak. - Heater matrix blockage (silicone bag issue). - Gear selector microswitch. - Undiagnosed weird hunting/high revs on idle coupled with "acc deactivated". - Latest is total internal bearing failure on the alternator. Now, thankfully my local dealer has been really good and have got all of the above sorted under warranty, apart from the undiagnosed issue, but they had a look and couldn't confirm, which is fair as the car did it for a week or two and then sorted itself and has been fine for about 3 weeks since. I've never been so glad to have a warranty and that VW have honoured it, so fair play to them/my dealer on that front, absolutely stellar service. This is basically my dream car (excluding things like a GT3RS or an R34 skyline which I'll never afford), but it's been the worst car I've ever owned for just having major component failures, it's just been one thing after another. Car was 34k/8yrs when I bought it and now at 48k/10yrs, so it's hardly crazy mileage, have I just been unlucky and got a "Friday" car? Anyhow, the point of this post was really to just ask, what other common failure points exist beyond my list - I am aware of the PCV and wonder if that's starting to fail which caused by spell of weird idle behaviour so I plan to sort that myself at some point in the run up to Xmas. Anything else I should be thinking of as I really want to and plan to keep the car for ever (still got my mk4 I bought 20yrs ago)? TIA
  11. Cool, thanks for the reply. I might see if I can order new adapter stem parts when I do the housing so I know it's all fresh and then I can check it all goes together before going to fit on the car. I believe the older and newer versions are cross compatible as long as the housing is the correct one for the adapter (i.e. you can't just upgrade to the 2 piece with the old housing as the internals must be slightly different)?
  12. Hi all, Did my first oil change on the car this morning and was concerned I'd snapped the oil filter housing adapter (middle shaft bit) as all the videos I'd watched beforehand show this as a single piece that comes out with the filter housing on removal. I've done 20yrs of oil changes on all sorts of vehicles but this was my first top mounted filter so always watch a few videos to check before just running in blind. I had a good look and couldn't see how it had snapped so was happy putting it back together. Google and Reddit confirms VW updated this to a 2 piece design around 2016? I'll likely upgrade to an alloy filter housing soon as I work my way through the racing line engine dress up bits - can anyone confirm that this 2 piece will just swap straight over to the alloy housing when I do?
  13. Got my wheels refurbished in "Deutsche sport silver" with a matte laquer to tie in with the OEM mirror caps and bumper trim. A bit different to the usual black everything out approach, I'm chuffed, they look great and have really freshened up the car. The refurb place had a mare, OEM locking wheel bolt key shattered on first use. Blatantly too much ugga duggas on the gun, but still I've not heard of this before, especially on a <10yrs old car where the key has probably been used a handful of times ever. Cost a bit extra per wheel for them to get the welder in to remove. Not performance enhancing unless silver paint weighs less than diamond cut 🤣
  14. Got my 16 plate estate coming up for it's 40k miles service. I've decided to do a mixture of self service for oil filter, plugs and pollen filter and dealers for the haldex and dsg. Update on prices (NE Scotland) from John Clarke VW is £199 for haldex and £345 for dsg. Quite a bit more than I'd seen in previous posts but it's only once every few years so it is what it is for the convenience/time factor for me. I bought OEM oil filter, drain plug and pollen filter (£32 for a pollen filter lol) but will source my own oil - I believe Castrol Edge Titanium LL 5w30 is the go to? I've used this for 20yrs on my mk4 GTi and never had an issue so that's the plan. Dealer wanted £25 a sparkplug which felt excessive so I'll get Bosch ones from ECP for £14 a plug, job done.
  15. Managed to get the roof done today, didn't take as long as I expected, but was still a solid 2+ hours. Same approach as above, just split the roof into 6-8 sections. Again impressed with the results, all the lacquer fade and cloudiness seems to have vanished.
  16. Thanks Booth! I did a hell of a lot of Youtube and Google last week which is where that came from about CG. Tbh it seems to be mostly US based sites/forums and largely around consumer pricepoint (dearer and no better) and marketing around having multiple products that do the same thing. Nobody outright says they're rubbish, just expensive. Thought I'd make my own mind up after being very impressed with their spray wax and VRT detailler. It'll do me for now, just to sort out a regime of weekly washing and sorting a pair of panels per time...
  17. So I gathered all the bits and tackled the bonnet today. Ended up buying a DAS6 pro. 1. Foam wash and rinse. 2. Bucket wash with clean slate. 3. Clay bar and wipe down with QD. 4. Orange hex logic and C4 compound. 5. Blue pads and P4 polish. 6. Jet seal by hand and buff off. I ended up doing the cut stage twice, mainly as the first area I did still had evidence of cloudyness under a torch which I put down to me learning. Here's some photos below, the real test will be on a dank morning as that's when it showed the most. The roof is showing after washing and is worse than the bonnet so will tackle that next wash. PS: Yeah, I know I know, chemical guys products everyone hates on but I can get them locally easily and wanted to have a crack this weekend. I've always been happy with AG and CG stuff, if it improves the state of this paintwork then that's a solid start, I may upgrade/change products in the future.
  18. Thanks again, very useful advice. Edit - should have said, it's a Glasgow car originally and now in the NE of Scotland, we have zero timescale up here so I'm led to thinking it being hard water etching is unlikely, but either way the general consensus here is a good machine polish should resolve. Had a quick look and think I'll pickup a DAS6 V2, I'm comfortable having a go myself, will buy a bare machine then do the research and pickup some products separately. Will update the thread to let you know how I get on, wish me luck!
  19. Thanks Booth! My mate also suggested a machine polisher so maybe this is something get next month and try (I've never owned one before!) Do you feel this is rescuable?
  20. Hi All, Got my R last Sept and have been struggling for time but have done a bit of detailing work on the car in stages as the weather has improved. I currently do everything by hand, and use AutoGlym and a few Chemical Guys products, noting I have had excellent results for many years that I'm perfectly happy with on my Reflex Silver mk4 GTI. Honestly the quality of the paint on the mk4 is far superior to the mk7, shocking but never mind we are where we are. My general paintwork regime is spray lance foam wash then once dry, AG clay bar the panel with rapid detailer, hand polish with AG super resin polish, hand apply and buff AG gloss protect, spray CG blazin banana (really brings out the colour, gave my silver mk4 a yellowish tinge, gives the R a purple tinge). I've only managed to clay bar the bonnet and wings so far when I get more than 30mins to wash my car, so they're the "most detailed panels" if that makes sense. I've noticed these weird marks, mainly on the bonnet and roof which I've put down to lacquer fade/issues, but that doesn't seem right on an 8 year old car? Could be water spots from being washed and left in the sun, but its fairly widespread rather than localised spots and I've noticed it kind of changes where I've polished or repolished. A mate suggested it could be some dealership type "life time ceramic coating" wearing off? It looks worse when the weather is dank/cold, but you can see it in the sun in fairly mild weather now too. I note the issue doesn't seem to have occurred on the wings and they've had the same treatment as the bonnet (i.e. back to clay bar, polish, seal, spray wax). What's peoples thoughts on what it could be a best way to tackle it? You can see the carpark reflection is really good, but the issues are very noticeable under direct light which really bothers me 😞
  21. Great to see some Caidz refurbed silver. I think I'm going to go this route for now, personally I hate the diamond cut look plus it never lasts that long. Been looking at wheels which sparked my interest in this thread but want to go OEM+ with this car and don't like the pretoria personally, plus want to keep it 18's. I do like Bola wheels and would go with them if I do go aftermarket - got a set of B10s on my Mk4 Golf and they look awesome, but don't think they'd suit the mk7, especially at stock ride height, so would be looking at the more spokey/open style.
  22. Thanks Mark, all makes sense. I've spoken to the service manager person and they also confirmed if it's found to be "an issue covered by used warranty" then the £162 is not payable, however they would not commit to stating if this job specifically would or would not be covered, which is a bit frustrating. They did say that wiring, 12v battery and a couple of other minor things were not covered, which kind of confirmed this would, but there's no certainty that's for sure. I just don't want to pay £162 for them to look, tell me it is what I think it is, and then say it's not covered but it looks like I can't avoid that, meh. I have only noticed the steaming issue yesterday and also don't want to get the classic "couldn't replicate the fault" situation. I'm happy to run the car as is, it's not got any running/temp issues, warning lights etc and I plan to give it a full check over this weekend for my own peace of mind. As I said it's job I can do myself no bother, but for the first time I wanted a car that was effectively from a dealer not random private sale and that would be covered for major stuff for 2ys, otherwise I may as well have saved £2k or whatever on sticker price and gone private to begin with!
  23. Hi All, Just looking for some advice in relation to used warranty claims so hopefully this is the right place? I bought my mk7 R approved used last Sept. Came with free 2yr approved used warranty - first time I've ever had this as I tend to work on all of my own vehicles. I had read about the dreaded thermostat/water pump housing issue so figured it's free and if I have that issue at least it will be covered and save me a job rolling around on the driveway. Car was bought with 34k, now on about 38k, first time noticing yesterday when I got out the car the front drivers side bumper vent was steaming. Had a look, had a sniff, couldn't see anything obvious and wouldn't say it smelled strongly of coolant but I could easily convince myself either way. I've not noticed any puddles under the car and not noticed and particular loss of coolant in the 6ish months of ownership. Car runs at temp no issues there, but not convinced a weep would change this anyhow. I've phoned the dealer and they want to charge me a £162 investigation fee, which would be refunded/not charged if it is indeed covered by warranty which feels like a trap to me. I asked them to confirm if this is a job that would be covered under warranty and their response was we can't tell you until we diagnose the issue - erm, that wasn't my question... I'm waiting on a call back from a service manager today to speak to them. Any thoughts on where I stand with this? Have people had this work done under a used warranty before? Car is 2016 plate but age shouldn't matter if they've sold it under an approved used warranty surely?
  24. Ah, my apologies! Centre caps threw me off 😉
  25. They look great! Potentially silly question I've been wondering about myself - given these are OEM wheels I assume they come with the TPMS valves? What about aftermarket wheels, how does the TPMS come into play?
×
×
  • Create New...