Jump to content

Golf R Estate 7.5


RoryWelch

Recommended Posts

Hi All - new to this forum!

 

Ive got a Golf R Estate 7.5 turning up next month and have been looking into putting a JB4 box on instead of a custom/flash map.

 

just interested to see what sort of figures people are seeing from the JB4 on the estate (or hatch)

 

Thanks,

 

Rory

Link to comment
Share on other sites

Hi Rory, congrats on your new R!. I don't have an estate mines a hatch I can tell you it will put a big smile on your face

I'm on (JB4) map 2 with around 5.6psi more boost over stock.

 

Where abouts are you I'm in Fareham Hampshire if your local I can take you for a spin if you like.

Here is some info on the map settings.

 

Map 0: Stock with complete pass through i.e. the JB4 does nothing


Map 1: Tuned map with a average of 4.0psi over stock. This is the shipped map and is compatible for both 91 and 93 and can be used with cars on hardware.

Map 2: This map is a more aggressive map. Peak boost add is 5.6psi over stock and the map is good for cars running 98Ron and above.

Map 4: This is a stock map but with JB4 logging ability. It is also the starter map for cars that are running flash tunes and are stacking the JB4. It will give the ability to log the car via the JB4. This is also the safety map, so in any circumstance the JB4 detects a unsafe condition regardless of map it will default to this map. This includes knock detection, lean AFR or the boost safety value being triggered due to lack of boost control.

Map 6: User adjustable boost map. The map comes preset with a 5.0psi over stock peak and is ready to use on any car running 93 octane. The preset map is also suitable for manual cars with clutch longevity in mind.
The mapping can be done in two manners. If the value at 1500 is kept below 10 it will work as a boost adder map. If the value at 1500 is higher than 10 it will work as a absolute map. This means actual total boost targets will need to be entered.

 

Map 8: Map three allows the JB4 to be the methanol controller working as a fail safe cutting boost if lack of meth flow is detected. You will require a Coolingmist FSB to get this working.

User Adjustment page:

Below is a outline of settings that can be changed in the User adjustment page:

Map 6 (blue outline): as explained above

Link to comment
Share on other sites

1 hour ago, Delta said:

Hi Rory, congrats on your new R!. I don't have an estate mines a hatch I can tell you it will put a big smile on your face

I'm on (JB4) map 2 with around 5.6psi more boost over stock.

 

Where abouts are you I'm in Fareham Hampshire if your local I can take you for a spin if you like.

Here is some info on the map settings.

 

Map 0: Stock with complete pass through i.e. the JB4 does nothing


Map 1: Tuned map with a average of 4.0psi over stock. This is the shipped map and is compatible for both 91 and 93 and can be used with cars on hardware.

Map 2: This map is a more aggressive map. Peak boost add is 5.6psi over stock and the map is good for cars running 98Ron and above.

Map 4: This is a stock map but with JB4 logging ability. It is also the starter map for cars that are running flash tunes and are stacking the JB4. It will give the ability to log the car via the JB4. This is also the safety map, so in any circumstance the JB4 detects a unsafe condition regardless of map it will default to this map. This includes knock detection, lean AFR or the boost safety value being triggered due to lack of boost control.

Map 6: User adjustable boost map. The map comes preset with a 5.0psi over stock peak and is ready to use on any car running 93 octane. The preset map is also suitable for manual cars with clutch longevity in mind.
The mapping can be done in two manners. If the value at 1500 is kept below 10 it will work as a boost adder map. If the value at 1500 is higher than 10 it will work as a absolute map. This means actual total boost targets will need to be entered.

 

Map 8: Map three allows the JB4 to be the methanol controller working as a fail safe cutting boost if lack of meth flow is detected. You will require a Coolingmist FSB to get this working.

User Adjustment page:

Below is a outline of settings that can be changed in the User adjustment page:

Map 6 (blue outline): as explained above

Hi Mate,

 

Thanks for the detailed response - gives me more of an understanding on the JB4 and what it's capable of? 

 

Im based in Essex so a fair way from you I think unfortunately! 

Link to comment
Share on other sites

18 minutes ago, Jon R306 said:

Hi Rory Welch

 

I'm driving a 7.5 hatch and yet to go JB4 but that's the way I'll go rather than Apr.  I'm looking for a removable device for services visits etc.

Yeah I get that! I have a local tuner so it's easy to remove/remap and I usually avoid any tuning boxes but the JB4 gets a good reputation so! 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Current Donation Goals

    • Raised £170
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...