southall87 Posted February 5, 2015 Report Share Posted February 5, 2015 Any old blade yes. But the Autoglym is as soft as a babys bum. The blade is great as long as you have cleaned the paintwork properly before using, I use one Quote Link to comment Share on other sites More sharing options...
Storry Posted February 7, 2015 Report Share Posted February 7, 2015 You could go down the route of buying a cheaper blow vac to blow out the remaining water, espeically around panel gaps/lights/grilles etc... Quote Link to comment Share on other sites More sharing options...
Fat Head Posted February 7, 2015 Report Share Posted February 7, 2015 Spray down with pressure washer Wash with 2 bucket method and grit guards dry clay (only if contaminants are there, rub the back of your hand over the paint, if you can hear anything, clay it, if not skip this step) polish seal wax Thats the basic way Quote Link to comment Share on other sites More sharing options...
Mat_the_w Posted February 7, 2015 Report Share Posted February 7, 2015 You could go down the route of buying a cheaper blow vac to blow out the remaining water, espeically around panel gaps/lights/grilles etc... Or buy a water filter for your final rinse, no need to dry as it will air dry without leaving water marks. Quote Link to comment Share on other sites More sharing options...
Storry Posted February 8, 2015 Report Share Posted February 8, 2015 Or buy a water filter for your final rinse, no need to dry as it will air dry without leaving water marks. I was looking into this. There's a bloke on DW that filters rain water via 3 water butts and it leaves the car spottless after rinsing. Quote Link to comment Share on other sites More sharing options...
R400 Posted February 8, 2015 Report Share Posted February 8, 2015 I was looking into this. There's a bloke on DW that filters rain water via 3 water butts and it leaves the car spottless after rinsing. http://www.polishedbliss.co.uk/acatalog/aqua-gleam-350-mm-de-ionising-water-filters.html Quote Link to comment Share on other sites More sharing options...
Mainframe Posted February 9, 2015 Report Share Posted February 9, 2015 Or buy a water filter for your final rinse, no need to dry as it will air dry without leaving water marks. They work very very well. I live in hard water area, so tap stuff leaves mineral spots on paint if you let it dry. No such problem with this. No need to rub with towels etc. you can just leave it and ditch the drying stage. No rubbing=less chance of swirls. But you can pat it dry if you are going to give it quick Tart's Bath with QD. £70 well spent if you don't like water marks or hand drying cars. Mat_the_w 1 Quote Link to comment Share on other sites More sharing options...
Storry Posted February 9, 2015 Report Share Posted February 9, 2015 They work very very well. I live in hard water area, so tap stuff leaves mineral spots on paint if you let it dry. No such problem with this. No need to rub with towels etc. you can just leave it and ditch the drying stage. No rubbing=less chance of swirls. But you can pat it dry if you are going to give it quick Tart's Bath with QD. £70 well spent if you don't like water marks or hand drying cars. Where did you purchase yours from Mainframe? Quote Link to comment Share on other sites More sharing options...
Mainframe Posted February 10, 2015 Report Share Posted February 10, 2015 A company called Race Glaze. Google then or read reviews on detailing world. Good service. 5 months use with no problems. http://www.detailingworld.co.uk/forum/showthread.php?t=272498 Storry 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.