savage16v Posted March 18, 2015 Report Share Posted March 18, 2015 Hi all, I want to make some changes using VCDS (never used it before), with the help of a friend who uses the software regularly. I am after some help in the codings for the things I am looking to do if anyone would be so kind? Alarm chirpSound actuator volumeRear brake lights - Have the code for this DRL brightness - Have the code for this Washer delay - Have the code for this If anybody has any other interesting suggestions of neat things to do whilst plugged in, I am all ears Thanks for any help in advance Quote Link to comment Share on other sites More sharing options...
keano Posted March 18, 2015 Report Share Posted March 18, 2015 I didn't know these things could be changed... Im starting to think I should find out more and have a fiddle I can provide no help to you dude but a free bump at least eh savage16v 1 Quote Link to comment Share on other sites More sharing options...
neg Posted March 18, 2015 Report Share Posted March 18, 2015 Alarm Beep - two parts, you dont have to do either but it could be useful to have. 1, Enable on lock and/or unlock first ... Central Electronics (09) Secuity Access - 31347Search the adaption channels for ...(1)-Acknowledgement Signals -Akustische Rueckmeldung entriegen (UNLOCKING) set to ON/ENABLE(2)-Acknowledgement Signals -Akustische Rueckmeldung verriegeln (LOCKING) set to ON/ENABLE 2, then to enable the menu on the media screen under 'locking' - this is just for enabling or disabling the options which you set above so an overall on/off not lock/unlock (7)-Acknowledgement Signals -Menuesteuerung akustische Rueckmeldung set to ENABLE/ON savage16v and bitmadmax 2 Quote Link to comment Share on other sites More sharing options...
neg Posted March 18, 2015 Report Share Posted March 18, 2015 Rear brake lights look so much better, followed a GTI with LED's (same as the R) and it looked a little crap compared to the outer and inner lights being on. savage16v 1 Quote Link to comment Share on other sites More sharing options...
Stobsie Posted March 18, 2015 Report Share Posted March 18, 2015 What is this brake light mod all about?? Quote Link to comment Share on other sites More sharing options...
neg Posted March 19, 2015 Report Share Posted March 19, 2015 see here... http://www.vwroc.com/forums/topic/8555-extend-rear-brake-lights-to-use-inner-boot-leds/ Quote Link to comment Share on other sites More sharing options...
shazR Posted March 19, 2015 Report Share Posted March 19, 2015 What is this brake light mod all about?? It's where the inner lights (in the tailgate) are programmed to illuminate with the brake as well as the outers. The lights in standard form only illuminate the outer lights with the brake. Quote Link to comment Share on other sites More sharing options...
savage16v Posted March 19, 2015 Author Report Share Posted March 19, 2015 Rear brake lights look so much better, followed a GTI with LED's (same as the R) and it looked a little crap compared to the outer and inner lights being on. Cheers for the code mate, yeah I followed the better half, she was in the Golf and I really dislike the brake lights just being the outer, don't like it at all. Don't suppose you have the soundaktor volume do you? Quote Link to comment Share on other sites More sharing options...
andy3141 Posted March 19, 2015 Report Share Posted March 19, 2015 Cheers for the code mate, yeah I followed the better half, she was in the Golf and I really dislike the brake lights just being the outer, don't like it at all. Don't suppose you have the soundaktor volume do you? 1. A9 (Structure Borne Sound). 2. Choose Adaption 10. 3. At Channel drop down choose "Volume of structure borne noise actuator" (this is the only choice). 4. Enter a value in the box (0= off; 100 = full volume), personally i chose 75%. 5. Close out with "Do it". 6. It also asks for a code, but VCDS suggests one, just OK it. Quote Link to comment Share on other sites More sharing options...
savage16v Posted March 19, 2015 Author Report Share Posted March 19, 2015 1. A9 (Structure Borne Sound). 2. Choose Adaption 10. 3. At Channel drop down choose "Volume of structure borne noise actuator" (this is the only choice). 4. Enter a value in the box (0= off; 100 = full volume), personally i chose 75%. 5. Close out with "Do it". 6. It also asks for a code, but VCDS suggests one, just OK it. Excellent, thanks mate Got all the codes I need now! Hopefully do it tonight Quote Link to comment Share on other sites More sharing options...
Fabrix 1664 Posted April 16, 2015 Report Share Posted April 16, 2015 Hi all, I want to make some changes using VCDS (never used it before), with the help of a friend who uses the software regularly. I am after some help in the codings for the things I am looking to do if anyone would be so kind? Alarm chirp Sound actuator volume Rear brake lights - Have the code for this DRL brightness - Have the code for this Washer delay - Have the code for this If anybody has any other interesting suggestions of neat things to do whilst plugged in, I am all ears Thanks for any help in advance Have you a file with all of these on, i have someone local to me that has a VCDS but needs to know what to do? or is there a PDF someone has created to list all the changes you can do how to etc>>> Quote Link to comment Share on other sites More sharing options...
MIGLIOR Posted April 16, 2015 Report Share Posted April 16, 2015 I can do it patrick for some beer tokens Quote Link to comment Share on other sites More sharing options...
Fabrix 1664 Posted April 16, 2015 Report Share Posted April 16, 2015 Hahaha Your on Jay Name your Poison! Quote Link to comment Share on other sites More sharing options...
savage16v Posted April 17, 2015 Author Report Share Posted April 17, 2015 I have these codes if you need them. Although the washer delay coding I have may be wrong as we couldn't find it through the instructions I have.... Fabrix 1664 1 Quote Link to comment Share on other sites More sharing options...
sbp Posted April 17, 2015 Report Share Posted April 17, 2015 https://sites.google.com/a/naturalnetworks.ca/vw-golf-mk7-vcds-how-to/ Came across this a while back, probably already been posted and isn't R-specific but will give you some ideas! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.