Jump to content

scoobyc

Members
  • Posts

    54
  • Joined

  • Last visited

Everything posted by scoobyc

  1. Did you consider cupra equivalent at all? Just wondering if you discounted it from a drive pov or just didn't like looks etc .
  2. What title do you post under, couldn't see anything 😶‍🌫️
  3. Any more pics? Think that works really well👏
  4. Thanks both, I think if I was going for lowered springs I'd try the Emmanuele Design ones from what I've read up on recently but oe seems like the best way forward and I'll do top mounts and bump stops. Appreciate the higher quality stuff would be a big improvement but can't justify it on my work car currently 👍
  5. Sounds fantastic but I'm guessing that's 2k plus...😬
  6. Thanks for the reply; 50k miles on passive shocks. Handling is fine as is, I have a 718 spyder for a sharper drive😊 I like the ride height but if I have to sacrifice it to remove the crashiness then that's what I'll do. Budget depends on how much of an improvement or compromise there is, if quality coilovers will remove the crashiness but leave the ride height I'll do man maths and justify it! My initial thought was back to oe but I'm worried I lose the ride height and it's still crashy- my standard R estate had DCC so I've no reference point for a standard passive shock car yet but may be able to do something about that hopefully...
  7. My 2014 3dr R is currently on VWR springs and I'm finally giving in that its just too crashy for me over potholes. Its fine on give and take B roads but the state of my local roads are depressing and pi55ing me off in equal measures so I'm going to make a change. It has a great looking stance but I'm quite happy to sacrifice this for less pothole bangs! So I'm looking for suggestions of what I should try next (return to OE or...?) but also what other parts of the suspension I should refresh (minimum being struts and springs in my head) at the same time and then get everything done at once? Also looking for any supplier suggestions if you've had a good experience/deal. Thanks in advance, SC.
  8. Just to update - turns out it was the haldex ecu that had water damage. Fitted another worked fine but still showed a fault code with obd11 as it was from a manual not a dsg car originally. Then got another controller from a dsg car, works perfect and no codes. Felt like a totally different car and remembered me of my original R, wonder how many people are driving around with these in 2wd without knowing as there's no warning lights...
  9. I've had various lights flash up and having checked the codes I'm pretty sure it's the rear right ABS sensor. Having read a few things about none genuine sensors playing up, is there any recommendations or just take the hit and order from local dealer? Any help appreciated!
  10. Do little update. I was told oil temperature has to be greater than 15 degrees so hoped this was it... 1. Open seems to work fine, try close and it starts but no matter what I try it won't stop then and I can't hear the pump (is it easily heard from in the car?). 2. Works. 3. Has now changed to (22) function cancelled, marginal conditions have not been met. Any ideas!
  11. Yep, identical pump with same part number but thanks.
  12. Thats a worry! Other than swapping out with another I've no idea what to do to check that and couldn't see how to get to that conclusion following this site and fault codes - https://www.haldexrepairs.co.uk/generation-5-haldex-fault-finding-repair-guide/
  13. Thats exactly what I've tried with vcds but it gives the error conditions message I mentioned above😖
  14. Thanks for the reply. Yes, that's the obd11 instructions I tried, with and without engine running. 1. Has always failed says (31) function not available. 2. Works fine. 3. Always fails and says (13) Function can not be performed, mess. lengthy format incorrect. 😖
  15. Hi All, I purchased a 14 plate R dsg with 35k on it in November and over the last few weeks I've noticed traction issues so suspected Haldex problems. Checked with obd11 and it had the fault code C111207 so instead of messing around, I ordered a new pump and oil change kit and had it cleaned and fitted. The old filter was badly caked with crud so all seemed worthwhile and I then set about trying to do the pump relearn instructions. Couldn't get it to work as it said "(13)function cannot be performed, mess. length or format incorrect" so read online that sometimes obd11 doesn't work for this so then borrowed a vcds from a pal. I've just tried it and the fault code has come back on when ever the traction control light comes on and when i try to get the pump to relearn it says "ERROR: Conditions not correct or request sequence error" which sounds very similair to the obd11 problem! Is there anything anyone can recommend for me to try next as I've run out of ideas? The car was tried off the ground and the rear is spinning but I believe as soon as theres any real drag on the wheels, it will struggle due to lack of pressure from the pump and hence the lack of traction. Thanks in advance for any help anyone can provide, SC.
  16. Has anyone had any problems get this to work? Seems to try and then says test unavailable, does the car have to be warmed up before trying this? Any help greatly appreciated!
  17. I did similar and I'm sure it was about £30 in total, something like £12 tax and £18 to process it!!
  18. Might be the case there's too many asked then or some other reason as he definitely confirmed today via email that he wouldn't do it. By my reckoning that adds 22.5%!
  19. Is this from previous experience or hearsay as George from Burgersport said they can't do that?
  20. The problem is, mine has cut out and had to restart as I haven't come to a halt, so your "solution" doesn't work on the newest dsg cars.
  21. Happens to my estate R too. Felt a bit odd if I'm honest as it cut out once even though i never came to a complete halt at one point, so I'll probably disable stop/start because of this in the future.
  22. Anybody else got what sounds like a rattle from the rear of the car on race/sport shifts on spirited driving? I'm sure it's suppossed to make some sort of barp but mine sounds very rattly as if something (maybe the false taile pipes!) are loose?
×
×
  • Create New...