Jump to content

twf16

Junior Members
  • Posts

    29
  • Joined

  • Last visited

Everything posted by twf16

  1. No problem. Look at it as an excuse for another mod! Sent from my iPhone using Tapatalk
  2. Don’t know who told you that you shouldn’t get clutch slip but they either lied or were misinformed themselves. The forums are full of stories of tuned cars getting clutch slip very quickly after tuning, it’s all but guaranteed. Sent from my iPhone using Tapatalk
  3. VWR springs with DCC on 19" Pretorias: And on 18" Neuspeed RSe12's: Sent from my iPhone using Tapatalk
  4. If you care about not having a CEL until you tune, I would say intercooler. Sent from my iPhone using Tapatalk
  5. Nope. I have heard of some getting it but it can be prevented by giving the car a little gas in neutral while the bolt is hand tightened to let the mount settle. Then just tighten the bolt to spec. Sent from my iPhone using Tapatalk
  6. As a bonus, it's a super easy self install if you're even the least bit mechanically inclined. Sent from my iPhone using Tapatalk
  7. I got the 034 motorsports one (around $35) as that seems to be the most popular. I know a few other brands also make one around a similar price point. Sent from my iPhone using Tapatalk
  8. Dogbone mount insert is super cheap and really tightens up the car on power delivery. Sent from my iPhone using Tapatalk
  9. Probably depends on DCC vs non-DCC. I did a lot of research before and saw 90% positive for DCC cars. That's why I picked these over eibach, Emmanuel, and H&R. Sent from my iPhone using Tapatalk
  10. I had them fitted a month ago. With DCC in comfort mode, I can barely tell the difference. In normal and race mode, it is noticeable but not in any way uncomfortable. Sent from my iPhone using Tapatalk
  11. twf16

    Obdeleven

    I'm just outside the Philadelphia area and have Obdeleven pro Sent from my iPhone using Tapatalk
  12. twf16

    Obdeleven

    Where are you located? Sent from my iPhone using Tapatalk
  13. The most common reasons: - 18" tires are less expensive/more commonly in stock - 18" rims are generally lighter - More sidewall on 18" tire gives a more comfortable ride and more rim protection from damage in the case of potholes and bumps Sent from my iPhone using Tapatalk
  14. If you are still under warranty, check with your dealer before buying them yourself. There have been a few threads regarding this issue already (it is not uncommon) and many have had them replaced under warranty. Sent from my iPhone using Tapatalk
  15. https://www.goapr.com/products/shifter_cable_bracket_mq350.html The OEM bracket is plastic and apparently it has some play in it that can affect feel on harder shifts. I figured I would put it in at the same time since I was already in there, but I don't think it's a must have by any means. Sent from my iPhone using Tapatalk
  16. No problem. I also did the solid shifter bracket at the same time but from what I've seen on the forums, it's the bushings that make the majority of the improvement. Sent from my iPhone using Tapatalk
  17. Looking back I would probably just buy a front to back one. I shortened side to side a little but don't feel it was needed. In the scheme of things it wasn't too expensive compared to other mods. Sent from my iPhone using Tapatalk
  18. I didn't feel the need for any side to side shortening and had the same fear. I think the bushings are the best thing you can do to the shifter, it makes it so much more precise. Sent from my iPhone using Tapatalk
  19. I have the APR and if you aren't doing track days, there is no need to adjust the side to side, in my opinion. It is already close enough for my tastes and the front to back is what needs to be shortened. Sent from my iPhone using Tapatalk
  20. Just curious as to what the consistency should be like. I ordered 2 30ml tubs of purple haze and blue velvet pro and both seem very hard. The wax in the container is cracked and appears dehydrated, and was very difficult to even apply to a wax pad. It says the purple haze is a soft wax but the wax I have is anything but soft. Does it tend to dry out that quickly? It was stored indoors at normal humidity and temp for a month or so after receiving it but that doesn't seem like long enough for it to go bad. Sent from my iPhone using Tapatalk
  21. Only car before for 7R was a 92 3000GT being my first car. A great car to teach me the frustration that comes with working on cars, how many curse words I can string together, and that I don't have small enough hands for many engine bay jobs [emoji23] Sent from my iPhone using Tapatalk
  22. I had this happen the other day for the first time. I think it was a combo of letting the car sit for a week or so, rain, snow, and freezing temps. Turned of the e-brake and let out the clutch and it just felt like the auto hold was engaged and wouldn't let go but eventually made an "unsticking" noise and was all good. I'm not too worried about it. Sent from my iPhone using Tapatalk
  23. South Bend Stage 3 Daily would be another option. Their stage 2 is rated to 400 ft/lbs and with the tune being 405 ft/lbs, that might be a little too close for comfort. Sent from my iPhone using Tapatalk
  24. Most will just wash it unless you request differently. The dealership I worked at would also have us wax nice cars (A8, R8, RS5, TT-RS, etc) or cars of their best/repeat customers. Sent from my iPhone using Tapatalk
  25. Awesome post, thanks a ton for putting this together! This will help me a ton when I get around to doing coding. Sent from my iPhone using Tapatalk
×
×
  • Create New...