-
Posts
49 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by Ryan200
-
Hi Guys , So i have attempted DSG calibration a few times now using obdeleven with all the criteria ticked , i get the usual clunking noise however every time the process does not complete nor does it take any credits away from me ? i have noticed when i do this i have to restart the car for it to select a gear again . Any ideas people ?
-
I'm running Eibach Pros without DCC , Great springs ! Ride quality wise the difference is barely noticeable , the only time I do notice is on rough roads/potholes Sent from my CLT-L29 using Tapatalk
-
It's done 43k , DSG drives faultless , I've had a play round with it this morning , I'm pretty sure the judder and sound is from the front brakes , it's almost as if the car is trying to reverse but the brakes are catching slightly or sticking [emoji848] interesting after a few goes at reversing and applying brake pressure the judder massively subsides Sent from my CLT-L29 using Tapatalk
-
https://youtu.be/U1hBa2ul0Zw Video attached , it's hard to distinguish from exhaust sound , but you can hear it when I come off the brakes [emoji848] Sent from my CLT-L29 using Tapatalk
-
So I've noticed every so often when reversing (DSG) I'm getting a bad judder through the vehicle , especially when cold ! It's like when I ease off the brake to reverse it's judders/vibrates and then when I apply the brakes it obviously stops , it's sound's almost like a vibration from all the wheels . Anyone come across this before ? Recently had new brakes all round + DSG service Sent from my CLT-L29 using Tapatalk
-
Thanks loads !! 99% Sure I have the right ones Sent from my CLT-L29 using Tapatalk
-
Your a star [emoji109] Sent from my CLT-L29 using Tapatalk
-
I'm having a rite game Tbf mate [emoji849] I'm just after Brembo pads nothing fancy but sizes are all over the place , don't have my owners manual either Sent from my CLT-L29 using Tapatalk
-
Can anyone tell me front and rear pad sizes ? Trying to source some brembo pads off euro car parts but there are different fittings Sent from my CLT-L29 using Tapatalk
-
Thanks Guys , I've gone for Mtec C hooks front and rear , Brembo pads are nearly new so I'm gonna try get away with changing the pads .. will have to inspect the wear on them etc .. Sent from my CLT-L29 using Tapatalk
-
Hi guys , so have noticed some brake judder under spirited braking and Also a lot of vibration through the brake pedal , rear discs are needing a change for sure , do you think my fronts do too ? I have notice slight grooving on the fronts Sent from my CLT-L29 using Tapatalk
-
How did you find the change in ride quality with the Eibach Pros going omto the 19"s ? I'm in two minds now ... Do I put the stock springs back on for improved comfort or do I leave the Eibach Pros on and try the Pilot sports [emoji849] Sent from my CLT-L29 using Tapatalk
-
Hi Guys So my DSG downshifts have been feeling pretty rough lately , i have attempted the DSG reset a few times now via apps , the reset starts and i get the usual clunking etc but after a moment the reset stops and i have no success message via the app and my credits do not reduce , also if i put the vehicle into drive it will just rev freely and will not move off unless i turn the engine off and back on .. am i missing something here ? any help would be appreciated , Im bottling it now that my DSG is on its way out 😪 . NOTE : DSG was serviced inc filter a few weeks back
-
I purchased the Golf with brand new Yokohama Advan AD08R's , the grip is outstanding but road noise is harsh and the car is very crashy , looking forward to trying the PS4's
-
Less crashy just off the tyre replacement ? By PS4S is that a Michelin tyre ? Sent from my CLT-L29 using Tapatalk
-
Hi Guys So noticed a slight judder has started happening only in reverse , I've had my DSG service carried out today but was wanting to reset my DSG , will this wipe my APR software ? Also has anyone had any issues with juddering on reverse ? Sent from my CLT-L29 using Tapatalk
-
That Dash .. I need a 7.5 [emoji1786] Sent from my CLT-L29 using Tapatalk
-
They look decent [emoji108][emoji108] Look even better on springs ! Did they come with wheel caps ? Sent from my CLT-L29 using Tapatalk
-
Any pics of the Prets fitted ? Sent from my CLT-L29 using Tapatalk
-
Are you local ? i live just by Midland VW
-
I'm on 19"s with 15mm Eibach Pro springs , it's not too bad but feels a tad crashy to me , will be purchasing some 18"s very soon , Just to note the springs made very little difference in ride quality Sent from my CLT-L29 using Tapatalk
-
Got a pic ? How do you find the set up ? Ride quality compared to stock ? Have been considering these for a while [emoji848] Sent from my CLT-L29 using Tapatalk
-
I'm on Eibach Pros 15mm , Really happy with them ! However can be a little crashy on the 19"s Sent from my CLT-L29 using Tapatalk
-
Hi Guys so I'm after some 18" Pro Race 1.2s in gloss black , wheel size 5x112 18x8 Et45 , but every website I can find doesn't mention if they will fit correctly without spigot rings ? Any advice or links please ? Sent from my CLT-L29 using Tapatalk
-
I'm running Scorpion decat with stock cat back/Resonator and love it , currently coded valves open pops and bangs under acceleration but does not drone at high speeds , also done the tail pipe tips gloss black [emoji108] Sent from my CLT-L29 using Tapatalk