Jump to content

Silverstoned

Members
  • Posts

    205
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Silverstoned

  1. not for the faint of heart, but it wasn't actually too difficult to install.
  2. Thanks for the kind words. The Swisstrax (rib trax) is essentially a grate. The water flows through easily and it's about 3/4" thick with channels that allow it to flow. While I don't have a slot drain, there is enough slope to my garage floor that the water just runs through the trax and then out the garage door. I probably don't need to, but I raise the garage door a tiny bit so the water doesn't dam where the door seal presses on the concrete. Garage is about 24' x 24'. Sorry for the freedom units, but even though I'm in Canada, everything construction related hasn't moved to the metric system yet Active 2.0 is great. I've heard good things about the 2.3 but the 2.0's seem to be on sale now because they are the old model. Lots of water flow and consistent pressure, tons of nice thick foam with my PF22.2 cannon. The left fuse/breaker panel is a bit of a story. I had to re-frame the 2x4 construction to furr it out to 2x6 due to the main supply line coming into the house which was sticking past the 2x4. It's also old as dirt and didn't have a panel cover like the one to the right. I'm thinking I'll make a large MDF panel on hinges that will hide both panels and serve as a mount for a dartboard. I just need to find some hinges that will let the panel sit tight to the wall. The size of the panel is somewhat oddball, so any of the panel covers I found on Amazon won't fit without a lot of drywall cutting and they would still prevent the surround from being removed if I ever need to replace a breaker switch. Still need to swisstrax the steps going into the house and a few other little things. Once I find solutions for those and finally finish the project I'll post a few more photos.
  3. A couple teaser photos. Not sure if there's a better place to put them.
  4. Maxton stuff is made of glass. This is Aerofabb, very durable and very solid mount to the bumper. My car is lowered so I expect this will rub a fair bit and I wanted something that would last. Side mount is still there because I am required to run a front plate in BC. When I got my car in Dec 2021 there was nothing available and I didn't want the dealer to drill into my front bumper. If this one ends up breaking I'll likely add the center mount one from Kollective Works, but for now I don't mind it. Garage floor is in fact in my garage. I had these parts and more sitting in my basement for several months as I did a full garage reno taking it from unfinished to near show-room finish. Maybe I'll post another thread for the garage build as I did 90% of the work myself over the course of a few months. Swisstrax flooring, lots of LED lights and 20A electrical plugs, integrated wash bay, pressure washer and air compressor on hand. It definitely makes me happy. 034 frame brace isn't for added stiffness, but for better clearance for my Milltek exhaust. It's larger diameter than stock and isn't squashed flat like the OEM one. I had to shift it to the one side of the tunnel so it wouldn't rub on the stock brace. Putting this one on reduced the in cabin vibrations as the exhaust would buzz against the stock brace on the highway when I let off the gas.
  5. Curious why you went with Shop DAP over E-acca.com. I would think the price is better and shipping faster given where you are located.
  6. 4 floor walk up apartments? That spiral staircase looks sketchy
  7. After a trip to the US to buy what the CAD dealers can't, I finally installed a homelink mirror.
  8. I can't speak for the Americans since I'm North of the border, but the vas majority of those wanting a towbar want it to transport bikes so they aren't on the roof. I only recall seeing two owners that actually tow, one had a tiny utility trailer for hauling his track tires/wheels and another who towed a single jetski. Personally I love mine. Completely invisible when the rack is removed as the receiver sits behind the license plate.
  9. The department of redundancy department called. They said that you should automatically add automatically in as many places in an advertisement so that people will automatically know that the hatch automatically unlocks automatically. I automatically had to reply to this post
  10. I figured if anyone could appreciate the time and effort it took to get them polished it would be you 😄
  11. 19.8x5 et45. 245/35 r19 ps4s tires, 8mm rear spacer and 5mm front spacers going on next week after they arrive from WCT. ET45 is just a little to inset on an 8.5 wheel for my liking.
  12. Installed the DG super pin and my refurbished and polished A8 wheels.
  13. Changing things up for the summer. These will likely be my winter wheels, but after spending way too much time refurbishing and polishing them I thought I'd put summer tires on them for this summer and enjoy the mirror finish while it lasts. The center caps were too far gone, so they got the plasti-dip treatment which I think looks really good.
  14. I wonder if you could remove them and polish off the R so you get a clean white dot in lieu of the R logo. I may have to give this a go the next time mine fail. So far so good on the 2nd set of replacements.
  15. I'm in Canada. '22 R on 1880 still and I've never had an issue turning it on or off. I heard of this being an issue with cars in Australia, but not in Canada or the USA.
  16. When you plug your phone in, there is a conflict between wired and wireless carplay. The fix is to disable bluetooth and/or wifi on your phone when plugging it in. That way the only signal between the phone and the car is via the cable.
  17. You should be fine. I was able to pull a little more slack on the wire from behind the trim piece and can connect to the sub while it sits inside the spare.
  18. Is it that hard to pull the wheel off and pop them out from the inside? With a floor jack and an impact gun this is all of 15 minutes for all 4 wheels.
  19. I think they are the same. Looking at a pick of Beck's R, both LHD and RHD have the rear wiper at rest pointing to the right (when viewed from the rear of the vehicle). The fronts however pivot in the opposite direction and the foil shape of the aerowipers makes them LHD and RHD specific.
  20. Happy with my Racingline but will end up going with the KW DDC as soon as my stock struts start to go. Racingline said not to trim the bump stops, but if I was to install them again, I'd get the APR short stops for a little more travel before the bump stops kick in. I'm seeing mixed things about the MSS kit now. A good product, but the adjustable feature that was a selling point to me isn't really a thing. You need to pull the struts to adjust the ride height. When you factor in the labour and the TTY bolts, this becomes completely impractical.
  21. Rockblox on my R for winter. A little more substantial than the Rally Armor, which are also a popular option for keeping the road crud in the wheel wells and off the sides of your car. The OEM splash guards only work on the GTI due to the different side skirt and apparently rear valence.
  22. Interesting that they put the heated seat controls on the lower right in a RHD car, but the power button is still way over on the left side for you to mute when required.
×
×
  • Create New...