KennyGTI Posted January 10, 2019 Report Share Posted January 10, 2019 Chassis Type: AU-VW37 (5Q0) Scan: 01 02 03 08 09 10 13 15 16 17 19 22 42 44 52 55 5F A9 VIN: WVWZZZAUZEW305142 Mileage: 56807km-35298miles 01-Engine -- Status: Malfunction 0010 02-Auto Trans -- Status: OK 0000 03-ABS Brakes -- Status: OK 0000 08-Auto HVAC -- Status: OK 0000 09-Cent. Elect. -- Status: OK 0000 10-Park/Steer Assist -- Status: OK 0000 13-Auto Dist. Reg -- Status: OK 0000 15-Airbags -- Status: OK 0000 16-Steering wheel -- Status: OK 0000 17-Instruments -- Status: OK 0000 19-CAN Gateway -- Status: OK 0000 22-AWD -- Status: OK 0000 42-Door Elect, Driver -- Status: OK 0000 44-Steering Assist -- Status: OK 0000 52-Door Elect, Pass. -- Status: OK 0000 55-Headlight Range -- Status: OK 0000 5F-Information Electr. -- Status: OK 0000 A9-Struct. Borne Sound -- Status: OK 0000 ------------------------------------------------------------------------------- Address 01: Engine (J623-CJXC) Labels:. 06K-907-425-V1.clb Part No SW: 5G0 906 259 B HW: 06K 907 425 B Component: 2.0l R4 TFSI H13 0002 Revision: --H13--- Coding: 091D00322466050B2004 Shop #: WSC 01357 011 00200 ASAM Dataset: EV_ECM20TFS0205G0906259B 001003 ROD: EV_ECM20TFS0205G0906259B.rod VCID: 2D7FC5DF7C1A0E2240-8078 6 Faults Found: 17789 - Insufficient Engine Cooling / Coolant Flow P00B7 00 [101] - - Not Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 1 Mileage: 56783 km Date: 2019.01.09 Time: 19:11:24 Engine speed: 1025.25 /min Normed load value: 2.7 % Vehicle speed: 0 km/h Coolant temperature: 65 °C Intake air temperature: 49 °C Ambient air pressure: 1030 mbar Voltage terminal 30: 11.601 V Unlearning counter according OBD: 40 Engine: operating status: IS Engine temp. management actuator: raw value: 1586 Engine temperature management actuator: stop open: 135 Engine temperature management actuator: after-run stop: 3956 RVC_SP: 164.50 ° RVC_AV: 96.84 ° RVCPWM: -100.000 % 15462 - Control Circuit for Coolant Bypass Valve P2681 00 [040] - Open Cricuit Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 40 Mileage: 56490 km Date: 2018.12.30 Time: 17:27:21 Engine speed: 0.00 /min Normed load value: 0.0 % Vehicle speed: 0 km/h Coolant temperature: 17 °C Intake air temperature: 19 °C Ambient air pressure: 1030 mbar Voltage terminal 30: 11.699 V Unlearning counter according OBD: 40 Engine: operating status: ES Engine temp. management actuator: raw value: 1474 Engine temperature management actuator: stop open: 135 Engine temperature management actuator: after-run stop: 3956 RVC_SP: 88.75 ° RVC_AV: 89.23 ° RVCPWM: 0.000 % 15470 - Insufficient Engine Cooling / Coolant Flow P00B7 00 [237] - - MIL ON - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 2 Mileage: 56783 km Date: 2019.01.09 Time: 19:11:26 Engine speed: 877.75 /min Normed load value: 4.7 % Vehicle speed: 0 km/h Coolant temperature: 64 °C Intake air temperature: 49 °C Ambient air pressure: 1030 mbar Voltage terminal 30: 11.601 V Unlearning counter according OBD: 40 Engine: operating status: IS Engine temp. management actuator: raw value: 1586 Engine temperature management actuator: stop open: 135 Engine temperature management actuator: after-run stop: 3956 RVC_SP: 76.78 ° RVC_AV: 96.84 ° RVCPWM: 100.000 % 16986 - Insufficient Engine Cooling / Coolant Flow P00B7 00 [101] - - Not Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 1 Mileage: 56788 km Date: 2019.01.09 Time: 20:34:02 Engine speed: 837.00 /min Normed load value: 4.7 % Vehicle speed: 0 km/h Coolant temperature: 64 °C Intake air temperature: 50 °C Ambient air pressure: 1030 mbar Voltage terminal 30: 11.718 V Unlearning counter according OBD: 40 Engine: operating status: IS Engine temp. management actuator: raw value: 1967 Engine temperature management actuator: stop open: 145 Engine temperature management actuator: after-run stop: 3948 RVC_SP: 102.50 ° RVC_AV: 122.16 ° RVCPWM: 100.000 % 16464 - Insufficient Engine Cooling / Coolant Flow P00B7 00 [040] - - Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 1 Mileage: 56791 km Date: 2019.01.09 Time: 20:42:03 Engine speed: 0.00 /min Normed load value: 0.0 % Vehicle speed: 0 km/h Coolant temperature: 98 °C Intake air temperature: 23 °C Ambient air pressure: 1030 mbar Voltage terminal 30: 12.031 V Unlearning counter according OBD: 40 Engine: operating status: ES Engine temp. management actuator: raw value: 1967 Engine temperature management actuator: stop open: 1967 Engine temperature management actuator: after-run stop: 3948 RVC_SP: 5.75 ° RVC_AV: 131.88 ° RVCPWM: 100.000 % 16465 - Insufficient Engine Cooling / Coolant Flow P00B7 00 [039] - - Not Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 1 Mileage: 56807 km Date: 2019.01.10 Time: 18:00:23 Engine speed: 0.00 /min Normed load value: 0.0 % Vehicle speed: 0 km/h Coolant temperature: 49 °C Intake air temperature: 24 °C Ambient air pressure: 1030 mbar Voltage terminal 30: 12.050 V Unlearning counter according OBD: 40 Engine: operating status: ES Engine temp. management actuator: raw value: 151 Engine temperature management actuator: stop open: 156 Engine temperature management actuator: after-run stop: 151 RVC_SP: 0.00 ° RVC_AV: 0.00 ° RVCPWM: -100.000 % Readiness: 0000 0000 Quote Link to comment Share on other sites More sharing options...
KennyGTI Posted January 10, 2019 Author Report Share Posted January 10, 2019 Anyone got any information on the codes above?? Quote Link to comment Share on other sites More sharing options...
SpursMadDave Posted January 11, 2019 Report Share Posted January 11, 2019 Anyone got any information on the codes above??I'm no expert but if it is coolant related there is a well known common fault with the thermostat housing leaking coolant, also the water ump is prone to failure. Do you get a low coolant warning on the dash, if you do and you open the coolant tank and it back fills that's a telltale sign.Sent from my SM-G935F using Tapatalk JRock_247 1 Quote Link to comment Share on other sites More sharing options...
KennyGTI Posted January 11, 2019 Author Report Share Posted January 11, 2019 It’s my mates car but he hasn’t had any loss of coolant. Looking on the internet it seems a common fault the thermostat being faulty. Fingers crossed that’s the issue. SpursMadDave 1 Quote Link to comment Share on other sites More sharing options...
JRock_247 Posted January 11, 2019 Report Share Posted January 11, 2019 Again, no expert myself but this looks suspiciously like the coolant bag split issue that is a common fault with these cars. Check the bag has not split inside the coolant reservoir. Standing in front of your car, you can find the bag to the right hand side of the tank. SpursMadDave 1 Quote Link to comment Share on other sites More sharing options...
SpursMadDave Posted January 11, 2019 Report Share Posted January 11, 2019 Again, no expert myself but this looks suspiciously like the coolant bag split issue that is a common fault with these cars. Check the bag has not split inside the coolant reservoir. Standing in front of your car, you can find the bag to the right hand side of the tank. A tell tale sign is apparently the heater matrix failing and then the heaters in the car being at different temperatures ie side hot and middle coldSent from my SM-G935F using Tapatalk JRock_247 1 Quote Link to comment Share on other sites More sharing options...
JRock_247 Posted January 11, 2019 Report Share Posted January 11, 2019 2 minutes ago, SpursMadDave said: A tell tale sign is apparently the heater matrix failing and then the heaters in the car being at different temperatures ie side hot and middle cold Sent from my SM-G935F using Tapatalk Thanks Dave, didn't know that. Wish we had a sticky thread for common faults and tell tale signs, would be very useful. Quote Link to comment Share on other sites More sharing options...
SpursMadDave Posted January 11, 2019 Report Share Posted January 11, 2019 Thanks Dave, didn't know that. Wish we had a sticky thread for common faults and tell tale signs, would be very useful. Only from what I have read, if the bag breaks the silicon beads get stuck in the heater matrix causing it to failSent from my SM-G935F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.