Boj27 Posted February 25, 2019 Report Share Posted February 25, 2019 Hi all, looking at buying these wheels.... i own an audi rs3 at the moment (don’t kill me!!) with 8.5j 19’s up front and the same at the rear but 8j. They both have 245/35/19 tyres on. Both are ET50. https://mbdesign.shop/en/mbdesign-kv1-dc-concave-wheel-shinyblack-polish-20inch-5x112-5b1 theyll be the 19 inch version though with ET45 as ET35 will be slightly too big. I could go 20 inch but then I’d need new tyres and it just gets so expensive, and there’s also the speedo issues etc. They weigh a featherly 7.25kg each, versus 14kg of my original alloys!! at the moment, looking at second hand prices, I could sell my Audi black rotors for £1200 as they’re mint, and pick those up for £2014 which makes the swap £814....would it be worth it to save 28kg off the weight of the car?! They also do them in matte grey grey which look great too. Quote Link to comment Share on other sites More sharing options...
blower Posted February 25, 2019 Report Share Posted February 25, 2019 If you loose a couple of stone, and throw out the spare wheel - you will get similar weight savings for nothing Stobsie 1 Quote Link to comment Share on other sites More sharing options...
Boj27 Posted February 25, 2019 Author Report Share Posted February 25, 2019 3 minutes ago, blower said: If you loose a couple of stone, and throw out the spare wheel - you will get similar weight savings for nothing Haha! No spare wheel in my car unfortunately (fortunately?) probably only have a stone to lose!! 7kg, that’s another wheel!! 😂 blower 1 Quote Link to comment Share on other sites More sharing options...
blower Posted February 25, 2019 Report Share Posted February 25, 2019 2 minutes ago, Boj27 said: Haha! No spare wheel in my car unfortunately (fortunately?) probably only have a stone to lose!! 7kg, that’s another wheel!! 😂 Well loosing 28kg of unsprung mass is the best place to loose it, it will probably be felt in the steering a bit (slightly sharper response)...but that aside i think you will hardly notice 28kg out of the ~1600kg of an RS3!. It's all about percentages really. Quote Link to comment Share on other sites More sharing options...
JonSW Posted February 25, 2019 Report Share Posted February 25, 2019 Yes, losing unsprung weight is important but let's cut to the chase. Do they look good? Yes, they look fabulous. Case closed 😉 Quote Link to comment Share on other sites More sharing options...
Kendo Nag Posted March 2, 2019 Report Share Posted March 2, 2019 Lovely looking wheel with a fantastic weight. Be sure to post your impressions if you go for them. It’s only money... Quote Link to comment Share on other sites More sharing options...
keano Posted March 2, 2019 Report Share Posted March 2, 2019 Unsprung weight savings are more important than general weight savings such as leaving the mrs to walk...Steering and driving feel will be much improved. I’m tempted to seek my bbs chr and get some td1.2s in 18s as dropping weight and size will improve ride, handling and feel all at once That being said looks count too...The bbs just look so pretty and so far that is making me keep them Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.