Jump to content

Launch control


bishop

Recommended Posts

Had a strange oddity today. Took lad from work for a spin went to show him launch control and it sat spinning the front wheels for a second before getting up and going. I’ve only done launch once before and it was damp but went like a rocket. I just had the haldex serviced yesterday. Has anyone had this before?

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites


Had a strange oddity today. Took lad from work for a spin went to show him launch control and it sat spinning the front wheels for a second before getting up and going. I’ve only done launch once before and it was damp but went like a rocket. I just had the haldex serviced yesterday. Has anyone had this before?
 
 
Sent from my iPhone using Tapatalk
Possibly just didn't get it quite right, easily done. Did you try it again with the same results? Maybe you fully disengaged traction control ie did a long press instead of a short one?

Sent from my SM-G950F using Tapatalk

Link to comment
Share on other sites

Possibly just didn't get it quite right, easily done. Did you try it again with the same results? Maybe you fully disengaged traction control ie did a long press instead of a short one?

Sent from my SM-G950F using Tapatalk


Yes I did fully disengage traction control. Should I only do the quick press?


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

I believe it's just a quick press, I've only done it a handful of times and never had the issue you mentioned. It actually is quite easy to mess up, especially if you dont really step on the brakes.

Sent from my SM-G950F using Tapatalk


Yes same only second time doing it. The first time I think I just did a quick press and it was fine didn’t think turning it off would make such a negative difference. I also tried to do it again to test for the same results and it wouldn’t engage launch just popped up the warning light. Turned off and back on and it was gone bit strange


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites


Yes same only second time doing it. The first time I think I just did a quick press and it was fine didn’t think turning it off would make such a negative difference. I also tried to do it again to test for the same results and it wouldn’t engage launch just popped up the warning light. Turned off and back on and it was gone bit strange


Sent from my iPhone using Tapatalk
Yeah I think that's probably what it was so doing the long press the car didnt actually go in to launch mode so you just did a quick start with traction control off hence the wheel spin. Nothing damaged I'm sure except a little pride lol

Sent from my SM-G950F using Tapatalk

Link to comment
Share on other sites

Yeah I think that's probably what it was so doing the long press the car didnt actually go in to launch mode so you just did a quick start with traction control off hence the wheel spin. Nothing damaged I'm sure except a little pride lol

Sent from my SM-G950F using Tapatalk


It did pop up saying launch activate just was like a front wheel drive spinning up for a second or 2 before going. Then when I tried again it wouldn’t engage at all


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Launch control will work with either ESC sport (short press) or ESC Off (Long press).

 

Regardless if ESC is in sport or Off it shouldnt spin wheels much - hardly at all (unless all 4 are spinning due to soaking wet conditions and/or crap/worn tyres)

 

If just your front wheels are spinning then there is something wrong with the haldex system - regardless of launch, esc setting etc - either all 4 wheels spin, or none at all. If just the fronts the haldex is fubared.

Link to comment
Share on other sites

Launch control will work with either ESC sport (short press) or ESC Off (Long press).
 
Regardless if ESC is in sport or Off it shouldnt spin wheels much - hardly at all (unless all 4 are spinning due to soaking wet conditions and/or crap/worn tyres)
 
If just your front wheels are spinning then there is something wrong with the haldex system - regardless of launch, esc setting etc - either all 4 wheels spin, or none at all. If just the fronts the haldex is fubared.

Well it’s weird it was like a proper burn out then after like 2 second it shot off like expected. It was working fine last time I tried it in the wet now I had the haldex serviced yesterday and it’s done this


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

2 minutes ago, bishop said:


Well it’s weird it was like a proper burn out then after like 2 second it shot off like expected. It was working fine last time I tried it in the wet now I had the haldex serviced yesterday and it’s done this


Sent from my iPhone using Tapatalk

 

Sounds like there is a problem with the haldex system - best get it checked, get codes read.

 

Did they just do an oil service or did they also remove and clean the pump (and its little mesh filter)?

Link to comment
Share on other sites

1 hour ago, bishop said:

So I just popped out and tried it again and it worked fine. Could there of been an airlock or something from the pump being removed and clean (I’m not to sure how it works) that caused it to engage slowly that first time?


Sent from my iPhone using Tapatalk

 

Completely possible!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Current Donation Goals

    • Raised £170
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...