AlmostR Posted September 28, 2022 Report Share Posted September 28, 2022 For anyone interested (with an OBDeleven device) it's now possible to code 'Presentation mode' for the IQ Matrix lights. I've tried it on my EU spec car, and it works flawlessly. It looks like this https://www.youtube.com/watch?v=Cuivr9_9kQs https://www.youtube.com/embed/VnRRBYVIPCE DISCLAIMER: Please be careful with these settings. I'm not a professional, and the following may or may not work for your specific car. Quote To Enable it you need to do the following when connected via OBDeleven: Release the hood/bonnet Select Control Unit 4B. Do an SFD unlock (unless you set it to automatic). Following setting are all Adaptions under 4B. Switch on: Presentation mode (This may already be Enabled). Presentation run dynamic AFS light (this will tilt the headlights up and down) (This may already be Enabled). Reference run activation effect (this will switch on the animation as seen above). Set reference run start condition to Motor start (or similar). Ignition can cause problems. In the end: Relock SFD (Or just be bland like me and let SFD time out, it doesn't matter). Scudgie 1 Quote Link to comment Share on other sites More sharing options...
Booth11 Posted September 28, 2022 Report Share Posted September 28, 2022 Thanks for posting 👍 Moved to obdeleven section with slight amendment to title. AlmostR 1 Quote Link to comment Share on other sites More sharing options...
AHG Posted September 28, 2022 Report Share Posted September 28, 2022 Last one sounds scary to me so if there is a problem with the light, the car won’t start ? Quote Link to comment Share on other sites More sharing options...
Scudgie Posted September 29, 2022 Report Share Posted September 29, 2022 On 28/09/2022 at 13:38, AlmostR said: For anyone interested (with an OBDeleven device) it's now possible to code 'Presentation mode' for the IQ Matrix lights. I've tried it on my EU spec car, and it works flawlessly. It looks like this https://www.youtube.com/watch?v=Cuivr9_9kQs https://www.youtube.com/embed/VnRRBYVIPCE DISCLAIMER: Please be careful with these settings. I'm not a professional, and the following may or may not work for your specific car. Sounds good, I will try this - thanks for posting. Quote Link to comment Share on other sites More sharing options...
AlmostR Posted October 3, 2022 Author Report Share Posted October 3, 2022 On 29/09/2022 at 00:20, AHG said: Last one sounds scary to me so if there is a problem with the light, the car won’t start ? Lol no no, it just means the 'trigger' for the reference run is 'Engine start'. Quote Link to comment Share on other sites More sharing options...
egg Posted October 6, 2022 Report Share Posted October 6, 2022 What does this look like from the front (outside of car)? The Rs3 has a very cool start up sequence in the lights spelling RS3 Quote Link to comment Share on other sites More sharing options...
AlmostR Posted October 7, 2022 Author Report Share Posted October 7, 2022 8 hours ago, egg said: What does this look like from the front (outside of car)? The Rs3 has a very cool start up sequence in the lights spelling RS3 Check the two videos in the topic post. Quote Link to comment Share on other sites More sharing options...
egg Posted October 7, 2022 Report Share Posted October 7, 2022 15 hours ago, AlmostR said: Check the two videos in the topic post. Sorry, I meant what do the actual headlight themselves look like when doing this. Quote Link to comment Share on other sites More sharing options...
AlmostR Posted October 8, 2022 Author Report Share Posted October 8, 2022 22 hours ago, egg said: Sorry, I meant what do the actual headlight themselves look like when doing this. Ah, uhmm.. well I'm guessing it's hardly noticeable in the lights themselves. But I'll see if i can make a video of it when it's convenient. Quote Link to comment Share on other sites More sharing options...
egg Posted October 8, 2022 Report Share Posted October 8, 2022 👍 just wondered if it’s an interesting pattern 😁 be great if you could code your own pattern in. here’s the RS3 light patterns mpv 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.