Benmk7 Posted October 19, 2023 Report Share Posted October 19, 2023 Hi basically I own a golf r an it was on stage 1 we removed the map and set it back to stock but before this my engine blown up twice and now we have decided to remove the map main issue’s are Piston cooling jet solenoid I have changed the sensor but unfortunately still showing this problem I drive the car for a min or 2 the epc and rpm comes on may I get some help the mechanic is blaming that my ecu has a problem and that it should be repaired any ideas ! Quote Link to comment Share on other sites More sharing options...
Booth11 Posted October 19, 2023 Report Share Posted October 19, 2023 4 hours ago, Benmk7 said: Hi basically I own a golf r an it was on stage 1 we removed the map and set it back to stock but before this my engine blown up twice and now we have decided to remove the map main issue’s are Piston cooling jet solenoid I have changed the sensor but unfortunately still showing this problem I drive the car for a min or 2 the epc and rpm comes on may I get some help the mechanic is blaming that my ecu has a problem and that it should be repaired any ideas ! Hi Ben Sorry to hear of your issue. Just to advise that you posted up multiple threads on the same topic across the forum. You only need one thread for the issue so I’ve removed the other threads and keep this one in the mk7 section. The FAQs section is for site/forum issues as opposed to car issues. 🙂 Quote Link to comment Share on other sites More sharing options...
Benmk7 Posted October 21, 2023 Author Report Share Posted October 21, 2023 Just found the fault code P25A900 P168D00 Quote Link to comment Share on other sites More sharing options...
HalAdams Posted October 22, 2023 Report Share Posted October 22, 2023 Where is your 'mechanic' who says the ECU is bad? Did s/he take and note the fault codes above? Both codes are well documented on the internet - with the probable cause coming from your oil control valve. Quote Link to comment Share on other sites More sharing options...
golf7.5r Posted October 22, 2023 Report Share Posted October 22, 2023 When you say your engine blew up, what do you mean exactly? Unlikely an ecu would cause this, more likely to be oil starvation, oil contamination or has been rebuilt badly at some point. Quote Link to comment Share on other sites More sharing options...
Benmk7 Posted October 22, 2023 Author Report Share Posted October 22, 2023 39 minutes ago, golf7.5r said: When you say your engine blew up, what do you mean exactly? Unlikely an ecu would cause this, more likely to be oil starvation, oil contamination or has been rebuilt badly at some point. Basically engine blew up meaning the crankshaft got scratched up from low oil pressure everything in the engine is new including new oil pump but now I drive the car for one min the epc and rpm light comes up and I can’t drive it losses full power Quote Link to comment Share on other sites More sharing options...
Benmk7 Posted October 22, 2023 Author Report Share Posted October 22, 2023 2 hours ago, HalAdams said: Where is your 'mechanic' who says the ECU is bad? Did s/he take and note the fault codes above? Both codes are well documented on the internet - with the probable cause coming from your oil control valve. He’s saying that the ecu isn’t responding the the piston cooling jet solaind we tested the capable and wiring seems fine Basically engine blew up meaning the crankshaft got scratched up from low oil pressure everything in the engine is new including new oil pump but now I drive the car for one min the epc and rpm light comes up and I can’t drive it losses full power and he is based in London also ecu was updated and I’m not sure how to fix this issue I can’t find any information at all all sensors are new too plus the mechanic just keeps blaming ecu can we make him wrong by fixing this issues by recommend what to change or what to do Quote Link to comment Share on other sites More sharing options...
HalAdams Posted October 22, 2023 Report Share Posted October 22, 2023 With all due respect, it sounds like your mechanic knows not what he is talking about and you would be better off taking the car to a proper VW place. And please do not say it is more expensive. Of course it is ! your car has an engine designed with fine parameters that should not be played with. How pray, can a piston cooling solenoid be the cause of big/main bearing oil starvation? Piston cooling is spraying oil underneath piston crowns. No where near a crankshaft. you gave two codes above. Why are you only focussing on one of them? I would look closely at the second code and apply some logic that says, in all probability, it is the piston cooling - and crankshaft oil supply - that are hindered by the second fault. Quote Link to comment Share on other sites More sharing options...
fastandy Posted October 23, 2023 Report Share Posted October 23, 2023 On 19/10/2023 at 02:28, Benmk7 said: Piston cooling jet solenoid I have changed the sensor but unfortunately still showing this problem I drive the car for a min or 2 the epc and rpm comes on may I get some help the mechanic is blaming that my ecu has a problem and that it should be repaired any ideas ! Isn't this regulated by a control solenoid in the oil filter bracket. It's not a sensor (there are also 2 x oil pressure high and low sensors in there as well). Have you definitely replaced the control solenoid? What was the part number. This issue with the oil pressure sensor fault make it sound like it might be contaminant debris causing them to block up ...maybe. could also correlate with the engine failures and debris that would of been circulating. Have you replaced the oil pressure sensors? Quote Link to comment Share on other sites More sharing options...
fastandy Posted October 25, 2023 Report Share Posted October 25, 2023 This might help possibly quite a lot explain what I was referring to. So, from my review of service diagram. It indicates. 2 x oil pressure switches in oil filter housing bracket 1 low pressure, 1 high pressure 1x spray nozzle valve solenoid in oil filter bracket 1 main oil pressure control valve in lower engine near crank pulley. 1 extra "level 3" oil pressure switch on front face of engine to right of water pump. I didn't know about that one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.