Jump to content

Start/Stop Disabled Due to “Humidity Inside Too High” — Can Target Values Be Adapted per Drive Mode?


WHY.A.H.WHY.A

Recommended Posts

So, I live in a very humid country, and I’m one of the few people who actually likes using the start/stop function.

Recently, I noticed that the start/stop system won’t activate when I’m in Comfort mode (which I use 100% of the time). The message I get on the dashboard is:
“Humidity inside too high.”

 

But as soon as I switch the drive mode to Eco, the start/stop function activates instantly.

This makes me think that each driving mode has a different target humidity level for when start/stop is allowed, and that Comfort mode is using a stricter threshold than Eco mode.

My question is: is there any way to adjust or adapt these humidity-related thresholds for each driving mode?

Link to comment
Share on other sites

  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

 Yahya: Hi.
Copy  below of my reply to this same question on the OBD11 forum:
 
OK - I don't have a definitive answer to your specific question - but if you are willing to experiment (and of course, if you accept accountability for proceeding), then maybe try adjusting the value for the following adaptation channel in the 08 Air Conditioning module:
  • A/C comfort parameter for start-stop function
 
According to my MQB database, the channel above does NOT appear in the 08 module on early model Golf mk7s  - but if it does, the factory standard value is always 5. 
 
According to the electric internet:

The "A/C comfort parameter for start-stop function" refers to a setting in the vehicle's climate control system that can be adjusted to disable the auto start-stop feature. By changing this parameter from its default value (usually 5) to 0, the start-stop function can be turned off, preventing the engine from shutting down when the vehicle is stopped.

Ensure that the climate control system is turned on during this process
 
So, maybe changing the setting to a value other than 5, or 0 will achieve your wants? 
 
Good luck and if you proceed - please share your findings with the forum community
 
Don 
 
PS: I'm not sure if a security code will be needed to modify this channel - if so, try 20103.
Link to comment
Share on other sites

19 hours ago, dv52 said:
adjusting the value for the following adaptation channel in the 08 Air Conditioning module:
  • A/C comfort parameter for start-stop function
 
According to my MQB database, the channel above does NOT appear in the 08 module on early model Golf mk7s  - but if it does, the factory standard value is always 5. 
 
According to the electric internet:

The "A/C comfort parameter for start-stop function" refers to a setting in the vehicle's climate control system that can be adjusted to disable the auto start-stop feature. By changing this parameter from its default value (usually 5) to 0, the start-stop function can be turned off, preventing the engine from shutting down when the vehicle is stopped.

 

 

Would be interesting to try it in the mk8 and the 8.5

Not sure if it’s SFD protected or not

Link to comment
Share on other sites

2 hours ago, AHG said:

 

 

Would be interesting to try it in the mk8 and the 8.5

Not sure if it’s SFD protected or not

@AHG: hmm...... according to my Golf database, the channel in my post above does appear in the 08 module on lots of post 2020 build cars - so if you want to play with my suggestion, at least there's a good chance that you will find the channel! But NO guarantees of course!!

 

However, the ONLY way to truly confirm if SFD (and if so, which version of SFD) infects particular modules is to poll the module and read the responding data - as follows:

  • If you are using VCDS: VCDS is incompatible with for both SFD1 (at present) and SFD2 - read the Ross-Tech document  HERE
  • If you are using OBD11: OBD11 is compatible with SFD1, but not SFD2 - the following instructions will identify if a module has SFD2 protection:
  1. Ignition ON, Engine OFF (IOEF)
  2. Fire-up OBD11 software and connect to the dongle
  3. Navigate to the Control Units screen and select the module
  4. Select Info - it's the first option
  5. Read the entry ODX name
  6. If the term "UNECE" appears in the entry, the module has SFD2 protection - example below for the Gateway module on a VW ID7:
    • EV_GatewICAS1MEBUNECE_VWE3

Don

 

PS: If your motivation to play with the 08 module is the alleged SS tweak as mentioned in my "electric internet" extract - be aware that the deities on the VW mother-ship enhanced the SS facility in later model MQB/MQB-evo platform cars (probably in response to the Dieselgate fiasco). 

Link to comment
Share on other sites

@AHG: It's my thick Strine accent that's confusing you !!😉

 

My suggestion is to first poll the module and ascertain what flavor SFD infects the module. If the answer is SFD2 (unlikely on a Golf mk8)- forget about it! If the answer is NO form of SFD, or SFD1 and you use OBD11 - give it a try!! If you use VCDS and the module has SFD1 - again, no go!

 

Note: I've personally NOT played with this channel - so I'm unaware of any issues related to the experiment

 

Don

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Current Donation Goals

    • Raised £170
  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...