bowie
Members-
Posts
80 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by bowie
-
I've been looking at intercoolers a lot lately as I want one for my S3 to go stage 2. Looked at the cheapies (direnza , mtc , etc) and then the higher ones. APR really expensive ! Wagner and Racingline seem to be around the same and Airtec are around £550. With very little hard evidence to support the cheaper ones (like for like setups , software etc) I decided just to ask the likes of MRC what they've seen and what gave the best results. Wagner was the answer they gave. I'll probably bite the bullet and go for a new Wagner as they almost never come up second hand. Anyone got the Airtec ? How does it perform ? Chris.
-
yeah. From Merthyr. Thought I recognised Capitol and the car wash at Troedyrhiw. Chris.
-
^^^^^Think you'll find that reflex silver 3dr DSG cars are the fastest Chris.
-
Spoke to the guy from ghostknit a while ago and told me that the sale of these had now been handed over to Racingline USA. Last I looked they were available on USP motorsport. Search carbon lip on there. Chris.
-
Quick question too , how are people cleaning the silver inserts on the seats ? Just interior shampoo ? Suede brush ? Chris.
-
If it's got Bluetooth the control unit will be under the drivers seat. Chris.
-
My mates a VW tech so me and him did it. Just knowing how things come apart really. Try and find someone like that ? Or youtube and have a go yourself. Most fiddly bit is getting the drivers seat out. Chris.
-
if you look at the 7P6 kits on the carsystems site they all do audio streaming. Mine was a K revision and does it. I've a RCD510. All the phone menus work fine and on the MFD. Chris.
-
Depends what you want to spend doesn't it ? I bought the kit from carsystems.pl for mine. IIRC it was £200 ish. Microphone was already installed. I think all R's have the mic already there. Comes with the foam insert and everything you need. Most of the newer versions support bluetooth audio streaming too. Front seat out , sill trim off and headunit out. Then fish all the wires through to where they need to go. Bit of coding and job done. http://www.carsystems.pl/golf-6-bt,tag.html Chris.
-
It's on the standard map at the moment but was on a custom map by a guy from South Wales. He's done all my cars previously. Looking for a boost leak bung to check for leaks now too. Chris.
-
Evening all , I've had a misfire on cylinder four for the last few weeks and I'm trying to pinpoint the cause. It happens high up at between 5500 & 6500 rpm. A bit random but there most of the time. Done the ususal stuff like swap the plug and coil pack from 4 to 1 to see if the misfire moves with them but it stays on 4. Compression test next and then probably an injector. I've recently put a Loba pump on and an RS4 FPV and wondered if the extra rail pressure was causing the misfire or just exposing a weakness in the injector. I've put the standard map back in too just to rule that out. Bit of an odd one though that I can't say I've noticed before is that , on idle , one tailpipe blows hot and the other stone cold ! I'm fairly sure that they've both been hot in the past. Very odd as the gases come up the same pipe to the rear muffler ! I've also read to check the intake runner on the manifold for cracks as this can also cause a misfire. Is there much else I can check or has anyone had this before ? Its coming up with the random misfire code and the cylinder 4 misfire on VCDS. Cheers , Chris.
-
My standard catback is open on idle mate. Chris.
-
I think its supposed to be open on idle and small throttle loading , closes on mid throttle and then opens up on big throttle loading. I'm currently running a Scorpion downpipe with the standard catback (so a bit loud) and you can hear the valve closing at certain load. Chris.
-
Doesn't it stay open on idle but only close at certain throttle positions / load ? Mine is open on idle. Chris.
-
Just changed my downpipe for the Scorpion hi flow cat mated to the standard catback. On cold start its loud. Really loud ! It drops off after about 30-40 secs and on idle basically sounds like standard. Part throttle sounds just like standard too but on WOT it really is loud ! Very raspy and farty. It pops a bit on the overun too. If you ran it with a resonated catback you'd probably find it was quieter. You have to remember that when you swap out the downpipe you're taking out two dense cats and a small oval resonator and replacing them with a 4-5" 200cell cat. I'll be welding a small resonator into the link pipe on the Scorpion to quieten it down. Good thread here : http://www.vwgolf.net.au/showthread.php?7051-Lucas-Golf-R/page80 Watch the youtube clips half way down to hear the difference on cold start. Read the pages before and after too. In fact , the whole thread is a really good read. Chris.
-
Had this the last time mine was in too. I was told there's a lip on all the discs and pads were 85% worn. My reply : I'll do the pads myself and that lip will be a lot bigger before they get changed ! Chris.
-
Front and rear bumper's a different colour shade?
bowie replied to Sanj's topic in VW Golf R MK6 Chat
^^^^ What he said. Certain angles make my front bumper look the wrong shade. Most of the Reflex Silver cars we've owned have been the same. My wife had two reflex Lupo GTIs and the bottom of the quarters looked a few shades out until you knelt down so that you were perpendicular with the panel then all looked fine. Rear bumper seems good though. Chris. -
Mines not far off the same mileage as yours and had the dsg service but still a bit shunty in and out of reverse. It also disengages from second gear occasionally when manoeuvring. I'll probably do the basic settings (dsg reset) soon to see if that makes a difference. May be worth you trying that ? I had similar issues when I bought it at 22k. Still under warranty then so gave it to the dealer and they diagnosed the clutch pack and changed that and , in fairness , it was better for quite a while. Worst case , there are people who repair the mechatronics now. Or you could put it back standard and see if you can get the goodwill from VW ? Hasn't there also been faulty temp sensor in the dsg boxes too ? Chris.
-
Didn't think there were actually pressure sensors. It works it out via induvidual wheel speed through the abs unit ? Reset with the glovebox button should do it. Chris.
-
Depends on your requirements really. I've had ITG open filter , Revo ceramic but couldn't stick the noise at low throttle. Once you're further up the rev range the noise isn't as pronounced. I've gone back to a Carbonio duct and panel filter. Is it any better than standard ? Probably not. Not that I can tell anyway. I did have a VWR enclosed but never fitted it and sold it. I'll probaly try another enclosed one though I think. Chris.
-
That's great. Thanks for that mate. Chris.
-
Can anyone help me please ? Part numbers for vw 6R brake pads front and rear. Anyone with etka ? Cheers in advance. Chris.
-
Painted or powdercoated ? Chris.
-
I got a pair of these if someone wants them. With the load resistors too. £20 posted ? They were fine on mine. No errors. Chris.