-
Posts
72 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by PND
-
If only they weren’t so susceptible to pothole damage. 😩
-
Yes, no problems. Will be going back again at the end of the year for MOT and service. No dealer ‘extras’ like car cleaning. Just as well as last time a main dealer cleaned my car, I ended up with a burst tyre!
-
Hi I’ve used them for my last couple of services and MOTs on my mk6 R. If you book in with Graham and arrange to borrow one of his little Skoda Citigo courtesy cars, you’ll be sorted. 👍😊 I too gave up on using main dealers.
-
I sympathise with you. I’ve managed to crack 2 in the last couple of years. They are 19” Talladega alloys and are well known for not getting on well with pot holes. I also recently snapped a front spring, which I think was helped on its way by a pothole or two! I had one alloy repaired and it has been fine since. As long as you go to a ‘reputable’ company, you should be OK. You occasionally see used ones on eBay - typically about £200-£220 secondhand. New would cost probably three times that much from a dealer.
-
I'm sure that Apple will have altered lots of things along the way, some intentionally and some not! Next time you're passing an Apple Store, pop in and give them a headache!
-
Hmm... assuming your events are backed up using iCloud, you could try going to www.icloud.com website on a pc, logging in with your Apple ID and then clicking on the calendar icon and see if the old events appear there. I'm just trying to confirm that they still exist!
-
Don't suppose you've got a Mac with the same shared events on? If so, do they show on the Mac?
-
Try going into settings --> calendar --> sync and choose all events. Go back into calendar and see if any old ones appear. Might take a few seconds. Might not work but worth a go!
-
People who start sentences with the word "So....."
-
Anybody happen to know if this is possible on the mk6?
-
Hi Callum Fellow 6R owner here. Very rarely see another one about near me - plenty of 7Rs though. Would I swap? Probably not.
-
I recently changed to a Sigma 150-600 C to go with my Canon 5D mk III and have been really pleased with the results. Let me know what you think. Best viewed in Flickr. Jay by Paul Deuble, on Flickr Mallard by Paul Deuble, on Flickr Mandarin Duck by Paul Deuble, on Flickr Kingfisher by Paul Deuble, on Flickr Robin by Paul Deuble, on Flickr Mallard by Paul Deuble, on Flickr Grey Squirrel by Paul Deuble, on Flickr
-
Email sent. Last time they cleaned it, they managed to destroy a tyre!
-
Still no joy in trying to use VCDS to diagnose so I had a look at both fans (with the engine off!) just to check they could spin freely. The smaller one seemed to be a bit reluctant when I first tried it but then got easier. The bigger one was fine. After a drive today I had a look under the bonnet with the engine still running and the AC on and both were whizzing round quite happily. Maybe the smaller one just needed 'freeing up'. Anyway, seems to be OK at the moment.
-
I have recently noticed that when I switch the engine off, my cooling fan is making a right racket! Having googled this, I believe it may indicate that the smaller fan is not spinning and therefore the larger one goes at full speed. I have just updated my VCDS to 15.7.4 and tried to go into 'Engine / Output tests' to then do a selective test on the cooling fans, which I believe should spin them both, but I am not getting the option to go into 'selective tests' as it is greyed out. Just to try something similar I went into 'radio' to do the selective sound tests of each speaker that you choose in turn but it says this is not possible. However, I had successfully done this on a previous version of VCDS on this same car. I initially updated to 15.7.4 by using auto update option. I have also tried by running a full 'remove program' and installed manually, but still get the same problem. Is it something to do with label files? I am getting no fault codes showing btw. Can anyone suggest anything to try? ..or any other way of testing the fans? It is a 2012 Golf R. Thanks for any help! Paul.
-
"If you would shake that up for me!"
-
There are a few in here... Settings are the same even though this is from the Skoda forum.. For the big mph readout.. But you want to choose RoW instead of Aus. It's in 17-instruments and then into coding. This should help.. http://www.briskoda.net/forums/topic/229766-vcds-adaptations-how-do-i/ Follow all the instructions and you should end up with big mph readout with temp shown below it.
-
Swirling P3 boost gauge to side lights
PND replied to YELLOW_TT's topic in Modifying your Golf R MK6
I believe it's pin 10 grey wire. See halfway down this install..... http://forums.vwvortex.com/showthread.php?6986841-My-P3Cars-VIDI-Gauge-Install-Review-and-Recommendations-MK6-Golf-R-GTI-TDI -
Yes I think they're OK. Alternatively, these... http://www.ebay.co.uk/itm/10X-AUDI-VW-VOLVO-DOOR-CARD-CLIPS-INTERIOR-TRIM-MOUTING-MOUTING-FASTENERS-/141470990573?fits=Car+Make%3AAudi&hash=item20f05400ed:g:Gs4AAOSwn51UZWC1 Don't forget you can reuse the original ones if you can 'open' them up again. Have fun!
-
Not my image, but may be of use.. Not sure how I actually ended up at some of my settings, but mine seem to work fine. Driver side coding = 0004854 - which is made up of 2 + 4 +16 + 32 + 64 + 128 + 512 + 4096 = 4854. Passenger side coding = 0005110 - which is the same as above + 256 (not sure why!). I don't get any errors with these settings so am happy to leave them as they are! Good luck!
-
Here's the log off mine - 5dr 2012 mk6 R with retrofitted folding & heated mirrors with puddle lights and I've also got retrofitted door warning lights in the bottom of all 4 doors. I'm trying to find the full list of which bits to tick for which options, that gives you the coding. If I locate it later on, I'll stick it on here for you. Hope it helps! ------------------------------------------------------------------------------- Address 42: Door Elect, Driver Labels: 1K0-959-701-MAX3.lbl Part No SW: 5K0 959 701 E HW: 5K0 959 701 E Component: Tuer-SG 009 2140 Coding: 0004854 Shop #: WSC 01357 011 00200 VCID: 3449D2485702F881BA7-8061 No fault code found. ------------------------------------------------------------------------------- Address 52: Door Elect, Pass. Labels: 1K0-959-702-MAX3.lbl Part No SW: 5K0 959 702 C HW: 5K0 959 702 C Component: Tuer-SG 009 2114 Coding: 0005110 Shop #: WSC 01357 011 00200 VCID: 334BD154520CFFB9A3D-8066 No fault code found. ------------------------------------------------------------------------------- Address 62: Door, Rear Left Labels: 1K0-959-703-GEN3.lbl Part No SW: 5K0 959 703 D HW: 5K0 959 703 D Component: Tuer-SG 007 2101 Coding: 0000208 Shop #: WSC 01357 011 1012551 VCID: 354FEF4C5C78E1898D9-8060 No fault code found. ------------------------------------------------------------------------------- Address 72: Door, Rear Right Labels: 1K0-959-704-GEN3.lbl Part No SW: 5K0 959 704 D HW: 5K0 959 704 D Component: Tuer-SG 007 2101 Coding: 0000208 Shop #: WSC 01357 011 1012551 VCID: 364DE840417EEA91843-8063 No fault code found.
-
Mk6 can be made to fold on locking and when opening the door with a Seat door controller module apparently.
-
Cheers - I'll give it a go later on.
-
Adam - do you know if this is possible on the mk6 as well? Is there a different unlock code? Cheers.
-
I think it's currently 40k miles or 5 years. You do seem to get different answers depending on who you ask - including VW!