Jump to content

tkboyle

Junior Members
  • Posts

    29
  • Joined

  • Last visited

Recent Profile Visitors

1,128 profile views

tkboyle's Achievements

Member

Member (2/9)

14

Reputation

  1. Money probably. Or some major problem in the contract between google and Volkswagen AG.
  2. You have to take the grey casing off. It's the same for the serial/USB cable.
  3. Top tip for you.. PosiTaps are reusable. Get yourself a bit of wire and have a practice. You can then take it off and see what it is actually doing. looks like the easiest part of the install if I'm honest. I'd be interested to see the Map2 logs if anyone has them.
  4. Not tapping the AFR pretty much makes it lose the benefits of the JB4 for fuel trims. Effectively will be the same as a JB1. This is my understanding. George has stated that the ODB and AFR hookup should net 10-15hp more over the JB1.
  5. Sure you tapped the right wire buddy. The AFR Wire on the grey plug is red when I looked. The AFR Wire from the JB4 was blue. This matched the install instructions exactly.
  6. JB4 Upgrade kit has been released! http://www.burgertuning.com/vw_audi_eA888_JB4_upgrade_kit.html It also looks like new hardware. Checkout he upgrade procedure.
  7. If you have seen what I have seen then its a strong possibility. Likely to be only on the cluster.
  8. I don't think it will be across the ODB2 socket. More likely it will tap into the canbus wire on the existing loom. I haven't read anything to suggest that there is additional wiring although it's difficult to trap all the information in the hundreds of pages of JB1 info.
  9. AFR targeting is one of the features I believe as well as boost control per gear too. I also read you can also read faults and clear them too.
  10. Bit late I know but have done 5 cars with Menzerna products. I have all of them and used Sonus pads. I prefer to DA rather than rotary. Only thing I can tell you is that the work rate for Menzerna is quite long. Their products are extremely lubricated and finish to an excellent gloss. Another tip for you is if the pad looks clogged stop and replace it as you will end up going nowhere fast. Also if it looks like it's drying out too quick quick squirt of water on the pad just to help lubricate the pad a bit more.
  11. tkboyle

    Tyre Slick?

    Megs is still good. I guess you're talking about the endurance range right? It's right about the sling. You basically don't need to go on too thick with it.
  12. I'm finding it super soft. The clearcoat marks just by looking at it. I've used a buffing pad with DoDo Juice Supernatural Micro Prime which is an ultrafine polish which can be used by machine or by hand. Totally recommend it to keep it looking 100% work time to defaect remvoal is quick and won't leave any trails.
  13. I'm not sure I'd want a ceramic product that requires so much effort to take off. I can't help but think that road rash and general use will make the paint look worse over time. Talking years here. There has been a couple of products announced recently that fixes this problem but essentially I think its still in its infancy. I still prefer to polish seal and wax to rectify defects. To me it's great for the 90% just not for me. I'd say stick to a decent sealant and wax. Maybe a wax with si02 content for durability.
×
×
  • Create New...