Spades
Members-
Posts
134 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by Spades
-
Brake disc hitting brake pads over bumps
Spades replied to Spades's topic in Modifying your Golf R MK7
Yes it should be the springs. I’ve driven through some dips where by I think the noise would appear and it has been okay so far. My car on Eibach Pro Kit and 8mm spacers have only about an index finger gap. -
Brake disc hitting brake pads over bumps
Spades replied to Spades's topic in Modifying your Golf R MK7
I have a feeling my Eibach’s have dropped even more because they look rather low to me, reducing the clearance over those dips. I probably got to go for slightly harder dampers like Bilstein B6. -
Brake disc hitting brake pads over bumps
Spades replied to Spades's topic in Modifying your Golf R MK7
I’m on stock 19” Pretoria’s, Eibach Pro Kit, 1 year old stock DCC dampers, 8mm spacers in front and 12mm in the rear, brand new PS4s and EBC Redstuff. Initially I ran Eibach for about a year plus (no spacers) to test the ride. Was good but my dampers were wearing out so I went to Ohlins. Rode way too hard for me and went back to Eibach but installed new dampers, spacers and OEM brake pads and genuine Clubsport S rotors. After this, the noise started. Since I changed so many things at once, I didn’t know where to look but I was certain the pads were knocking the calliper. I thought it was bad pads so I installed Redstuff but still the noise persisted. I changed my tyres not knowing it was rubbing so I didn’t check it. Took the car to a VW specialist and they discovered the fender screw was all shiny and white already. I never had this problem on Eibach with no spacers or Ohlins (and I had driven the car more aggressively on the coilovers with no noise) I think that 8mm spacer was enough to cause the tyre to rub against the screw over large dips or potholes. Lots of members here run larger spacers and never had this problem though. Maybe the roads where I am just dip a little more aggressively. We learn something new everyday . -
Brake disc hitting brake pads over bumps
Spades replied to Spades's topic in Modifying your Golf R MK7
I took it to another shop and they removed the fender screw. It seems like this is the culprit since the screw on the left was all shiny compared to the one on the right (still all black). I think this is it. Apparently the weight of your passenger plays a big role on whether or not Eibach + stock shocks will rub. If I drive alone, it won’t be rubbing. I didn’t know rubbing sounded this bad. Honestly sounds like you’re breaking something. -
Brake disc hitting brake pads over bumps
Spades replied to Spades's topic in Modifying your Golf R MK7
Yup, that’s the noise at the end of the clip. Thank clonk. Mine doesn’t make any squeaking or grinding noise while driving or braking. It’s just when I hit those bumps and that clonk appears. If I brake while going over those type of bumps, the noise is still there. I just took a close look at my pads and it looks like the edge of it has chipped off already. I think the pad is somehow hitting the calliper on those bumps. I’m going to take it to another shop and hopefully they can help me out. This noise makes me paranoid to drive the car now. -
Brake disc hitting brake pads over bumps
Spades replied to Spades's topic in Modifying your Golf R MK7
Update : Replaced all 4 brake pads, replaced all 4 tyres and realigned but still has that noise. A Quick Look at the components when the wheel was off didn’t appear to have anything broken or leaking. I’ve uploaded a video on YouTube showing the noise and type of road. This noise gets worse or more apparent when there’s a front passenger. -
Brake disc hitting brake pads over bumps
Spades replied to Spades's topic in Modifying your Golf R MK7
They look normal to my untrained eyes, no scuffs or damages anywhere even on the rotor. I'm hoping it's just a bad pair of pads. -
Hey guys, I recently had my brake pads replaced and ever since then, the left side has a scraping noise whenever I go over any angulations on the road. I took it back to the shop, the switched the pads from right to left and left to right but the noise is still there. I'm going to replace the brake pads again but is there anything else that could result in this noise? I'm thinking the pad or caliper is hitting against the rotor. They have tried to put shims in but doesn't do anything.
-
COILOVERS DCC - Best aftermarket options ????
Spades replied to dazie00's topic in Modifying your Golf R MK7
I used to run Ohlins on my 7.5 R because heard really good things about them but I guess everyone has their definition of a firm ride. To me they were too firm. Softest settings felt like Race +. Going through certain speed bumps at approx 5km/h would make the rear of the car fly up. If there was someone in the rear, they would definitely hit their head on the roof. I swapped it back to Eibach and new original shocks with DCC calibration and the car looks fantastic without bouncing everywhere. Don't get me wrong with Ohlins. They handled fantastically but it's not something I would look for in a daily rider. -
I’ve brought the car back to the workshop. I think it might be an air lock in the system since I don’t notice any liquid under the car.
-
Now that the engine is cold, it is back up to slightly below the "min" line. That fluctuation is huge though.
-
Hey guys, the coolant on my 2018 Mk7.5 R has been acting up these past few months. 2 months ago, the coolant randomly dropped to almost empty and was towed to the workshop where no leak was found and just refilled. Today, the coolant dropped to almost empty once again but I just checked my car again and the level is back up to slightly below the min marking. What could cause this dramatic fluctuations?
-
OEM DCC dampers lifespan with lowering springs
Spades replied to Spades's topic in Modifying your Golf R MK7
I just went over a rough road today and was being tossed around in the air going through the potholes at around 20 mph. I think I'll be going back to original DCC. Anyone got the part numbers for both front and rear shocks? There's a few online so not too sure which is the correct one. -
I'm now running them on 15 / 15 . The rebound from speed bumps seems to have reduced weirdly but still rough roads upset the car and feels like they're jumping? I think this is due to the stiff springs and ultimately will ride like this to an extend.
-
Hey guys, as the title suggests, how long did your DCC dampers last with lowering springs? Mine lasted 45k km on stock springs, just the last 5k on Eibach which worn them out. I’m now running Ohlins but they’re a bit too firm even on softest settings over speed bumps especially so considering going back to Eibach with a new set of OEM dampers.
-
Hey guys, I just fitted the Ohlins Road and Track on my 7.5 R. Corners flat now but I still am tinkering with the adjustments for rough roads. Where I am, there’s constantly potholes so I am running 20 / 20 (most soft). 80% of the time it’s fine, just that when going through suspension breaker humps, they do hurt. Is there any other settings I can try? Or what are you guys running?
-
VBT Brake Discs Anti Corrosion Coating Performance
Spades replied to lorne_ranger's topic in Modifying your Golf R MK7
Sorry to revive this thread but I’m also looking to get these for my rear discs. From their website, the discs look black. Do they fade to silver over time? I hope they do as I want to match the Clubsport discs on the front. -
Are they available as a silver option to match the CS discs on the front? I see from their website, it looks black / dark grey.
-
Hello, sorry to revive this thread. I am too looking at the MTEC rear discs. Are yours uncoated? I see they have an option for silver coating which may match the slight gloss to the Clubsports in front.
-
I find most of the grind will be taken out if you clean the tips whenever you wash your car. I would just take a used wash mitt with leftover car shampoo to rub off the soot. I would get about 99% of it out and for the 1% stubborn soot, I'll use Autosol. If you constantly clean and not let the soot sit for too long, it's way easier to clean. Can be cleaned in less than 5 minutes for me.
-
Your R looks spot on with the Oettinger spoiler too. I agree that if they stick out without a diffuser it looks a little out of place. I think that spoiler is going to cost me another arm. Where did you get yours from?
-
Hey guys, I'm new to the whole coilovers market and am considering getting a set for my Mk7.5 R as the shocks are wearing out. I have yet to track my 5 year old R and would be safe to say I would never track it but have lowered it with Eibach Pro kits for aesthetics. I read that KW DCC are not up to KW's standards, granted a few years ago. Has anyone had any recent experience with them? I ideally would want to keep the DCC functionality but if they are similar to the stock, I don't think it's worth the price. How does the KW V3 ride on rough roads? I've read that Ohlins are the ultimate coilovers (have your cake and eat it situation) but they do cost a lot. How hard are they to adjust yourself? Do I have to always jack up the car or remove the wheels to adjust the ride height or dampening? Also, is buying used coilovers a good deal? From what I understand, they can be serviced and essentially perform like "new" again.
-
They look great, a bit lower than Eibach Pro kits springs which is good enough to not scrap upon entering or exiting driveways. Can you adjust the dampening and height both without jacking up or removing the wheels for the front and back? It just seems like it’s very tight to access there. I suppose once you fine tune it to your liking, you’re not going to be tinkering with it much more
-
I'm leaning towards the Ohlins but they are not DCC compatible right? Do you miss the DCC? Also, do I have to always jack the car up to adjust the coilovers or can they be done on the ground? It seems kind of tedious to always need to jack up the car especially when fine tuning it to my liking.
-
I've ordered the rolled tips. Now deciding if I want to install them to sit like stock or have them stick out slightly over the diffuser to show off the R logo.